Access the full text.
Sign up today, get DeepDyve free for 14 days.
S. Mehanny, G. Deierlein (2001)
Seismic Damage and Collapse Assessment of Composite Moment FramesJournal of Structural Engineering-asce, 127
Heui-Yung Chang, H. Kawakami (2006)
Effects of Ground Motion Parameters and Cyclic Degradation Behavior on Collapse Response of Steel Moment-Resisting FramesJournal of Structural Engineering-asce, 132
(2011)
Improving seismic performance of steel moment connections with noncompact beam web
H. Sucuoğlu, A. Erberik (2004)
Energy‐based hysteresis and damage models for deteriorating systemsEarthquake Engineering & Structural Dynamics, 33
D. Lignos, Yu‐Lin Chung, T. Nagae, M. Nakashima (2011)
Numerical and experimental evaluation of seismic capacity of high-rise steel buildings subjected to long duration earthquakesComputers & Structures, 89
H. Krawinkler, F. Zareian (2007)
Prediction of collapse—how realistic and practical is it, and what can we learn from it?The Structural Design of Tall and Special Buildings, 16
G. Shi, Meng Wang, Yuanqing Wang, Fei Wang (2013)
Cyclic Behavior of 460 MPa High Strength Structural Steel and Welded Connection under Earthquake LoadingAdvances in Structural Engineering, 16
G. Shi, Meng Wang, Yu Bai, Fei Wang, Yongjiu Shi, Yuanqing Wang (2012)
Experimental and modeling study of high-strength structural steel under cyclic loadingEngineering Structures, 37
Meng Wang, Yongjiu Shi, Yuanqing Wang (2012)
Equivalent constitutive model of steel with cumulative degradation and damageJournal of Constructional Steel Research, 79
A. Esmaeily, Yan Xiao (2005)
Behavior of reinforced concrete columns under variable axial loads : AnalysisAci Structural Journal, 102
G. Powell, Rakesh Allahabadi (1988)
Seismic damage prediction by deterministic methods: Concepts and proceduresEarthquake Engineering & Structural Dynamics, 16
G. Corte, G. Matteis, R. Landolfo, F. Mazzolani (2002)
Seismic analysis of MR steel frames based on refined hysteretic models of connectionsJournal of Constructional Steel Research, 58
Jong-Keol Song, J. Pincheira (2000)
Spectral Displacement Demands of Stiffness- and Strength-Degrading SystemsEarthquake Spectra, 16
Liu Honǵquan (2004)
Analysis and experiment of cumulated damage of steel frame structures under earthquake actionJournal of Building Structures
C. Castiglioni (2005)
Effects of the loading history on the local buckling behavior and failure mode of welded beam-to-column joints in moment-resisting steel framesJournal of Engineering Mechanics-asce, 131
L. Ibarra, R. Medina, H. Krawinkler (2005)
Hysteretic models that incorporate strength and stiffness deteriorationEarthquake Engineering & Structural Dynamics, 34
J. Ricles, C. Mao, Le-wu Lu, J. Fisher (2002)
INELASTIC CYCLIC TESTING OF WELDED UNREINFORCED MOMENT CONNECTIONSJournal of Structural Engineering-asce, 128
M. Sivaselvan, A. Reinhorn (2000)
Hysteretic models for deteriorating inelastic structuresScopus
Yongjiu Shi, Meng Wang, Yuanqing Wang (2011)
Experimental and constitutive model study of structural steel under cyclic loadingJournal of Constructional Steel Research, 67
S. Zuyan, Dong Bao, Cao Wenxian (1998)
A hysteresis model for plane steel members with damage cumulation effectsJournal of Constructional Steel Research, 48
(2007)
The Index System and the Analysis Method for Seismic Appraisal of Existing Multi-Storey and High-Rise Steel Frame Structures, PhD Thesis, Tongji University, Shanghai, China
In order to quantitatively describe the effect of strength and stiffness degradation on seismic behaviors of steel frame, numerical models (the equivalent constitutive model considering damage and steel hysteretic constitutive model without considering damage) for predicting seismic behaviors of steel frame structures were described. Three frame models of five-floor, ten-floor and fifteen-floor frames were analyzed. Eight earthquake records were selected for time history analysis. The differences of inter-story drift ratio distribution calculated by two constitutive models were compared. The influencing laws and degrees of damage and degradation on seismic behaviors were also obtained. Finally, a prediction curve of degradation index was proposed, which could be used for damage control. Preliminary evaluation methods for seismic performance of steel frames considering damage and degradation were discussed. The analysis of the results showed that: the inter-story drift ratios of the three frames calculated by damage model were obviously larger than the results of non-damage model, showing that damage and degradation amplified the structural deformations. With the increasing of floors, the differences of inter-story drift ratio between damage model and non-damage model were gradually reduced. The weak stories of three models were located at 0.4 to 0.5 times of structural height, which should be paid more attention in design process.
Advances in Structural Engineering – SAGE
Published: Dec 1, 2015
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.