Access the full text.
Sign up today, get DeepDyve free for 14 days.
(2008)
“ A parametric study on RC existing buildings to compare different analysis methods considered in the European seismic code ” , The 14 th World Conference on Earthquake Engineering
N. Genzano, C. Aliano, C. Filizzola, N. Pergola, V. Tramutoli (2007)
A robust satellite technique for monitoring seismically active areas: The case of Bhuj Gujarat earthquakeTectonophysics, 431
A. Elnashai, A. Elghazouli (1993)
Performance of composite steel/concrete members under earthquake loading. Part I: Analytical modelEarthquake Engineering & Structural Dynamics, 22
Hemchandra Chaulagain, H. Rodrigues, E. Spacone, H. Varum (2012)
Reflection on the seismic vulnerability associated to common RC buildings in Nepal
M. Arslan, H. Korkmaz (2007)
What is to be learned from damage and failure of reinforced concrete structures during recent earthquakes in TurkeyEngineering Failure Analysis, 14
A. Masi, M. Vona, V. Manfredi (2008)
A parametric study on RC existing buildings to compare different analysis methods considered in the European seismic code (EC8-3)
J. Bothara, K. Hicyilmaz (2008)
General observations of building behaviour during the 8th October 2005 Pakistan earthquakeBulletin of the New Zealand National Society for Earthquake Engineering, 41
(2007)
Housing Report Pillar Walaghar (URM Infilled RC Frame Buildings), Report No
(1983)
Effects of Bond Deterioration on Hysteretic Behaviour of Reinforced Concrete Joints
A. D’Ambrisi, M. Stefano, M. Tanganelli, S. Viti (2013)
Influence of the Variability of Concrete Mechanical Properties on the Seismic Response of Existing RC Framed Structures
J. Mander, M. Priestley, R. Park (1988)
Theoretical stress strain model for confined concreteJournal of Structural Engineering-asce, 114
B. Shrestha, A. Dixit (2008)
China STANDARD DESIGN FOR EARTHQUAKE RESISTANT BUILDINGS AND AID TO BUILDING CODE IMPLEMENTATION IN NEPAL
(1988)
Bhadau Panch Ko Bhukampa (In Nepali), Central Disaster Relief Committee, Nepal
A. Ghoulbzouri, A. Khamlichi, M. Bezzazi, F. Almansa (2011)
Seismic performance reliability analysis for reinforced concrete buildings, 2
H. Sezen, A. Whittaker, K. Elwood, K. Mosalam (2003)
Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practise in TurkeyEngineering Structures, 25
Sifat Muin (2011)
A parametric study of RC moment resisting frames at joint level by investigating Moment -Curvature relationsInternational Journal of Civil and Structural Engineering, 2
Hemchandra Chaulagain, H. Rodrigues, J. Jara, E. Spacone, H. Varum (2013)
Seismic response of current RC buildings in Nepal: A comparative analysis of different design/constructionEngineering Structures, 49
Juan Rueda (1997)
Energy dissipation devices for seismic upgrading of RC structures
(2006)
Development and verification of a displacement based adaptive pushover procedure”, Journal of Earthquake Engineering, Vol
V. Pereira, Rui Barros, M. Braz-César (2009)
A PARAMETRIC STUDY OF A R/C FRAME BASED ON "PUSHOVER" ANALYSIS
(1935)
Great Earthquake of Nepal, Nepali Edition, pp
R. Bilham, V. Gaur, P. Molnar (2001)
Himalayan Seismic HazardScience, 293
P. Vijay, H. Gangarao (2001)
BENDING BEHAVIOR AND DEFORMABILITY OF GLASS FIBER-REINFORCED POLYMER REINFORCED CONCRETE MEMBERSAci Structural Journal, 98
(2001)
Earthquakes: himalayan seismic hazard”, Science, Vol
K. Dooley, J. Bracci (2001)
Seismic Evaluation of Column-to-Beam Strength Ratiosin Reinforced Concrete FramesAci Structural Journal, 98
(2009)
Failure mechanism and its control of building structures under earthquakes based on structural Advances in Structural Engineering Vol
J. Bothara, D. Beetham, D. Brunsdon, M. Stannard, Roger Brown, C. Hyland, Warren Lewis, Scott Miller, R. Sanders, Yakso Sulistio (2010)
General observations of effects of the 30th September 2009 Padang earthquake, IndonesiaBulletin of the New Zealand National Society for Earthquake Engineering, 43
R. Bilham, V. Gaur, P. Molnar (2001)
Earthquakes. Himalayan seismic hazard.Science, 293 5534
P. Madas, A. Elnashai (1992)
A new passive confinement model for the analysis of concrete structures subjected to cyclic and transient dynamic loadingEarthquake Engineering & Structural Dynamics, 21
Hemchandra Chaulagain (2010)
Assessment of response reduction factor of RC buildings in Kathmandu Valley using non-linear pushover analysis
A. Ghobarah, M. Saatcioglu, I. Nistor (2006)
The impact of the 26 December 2004 earthquake and tsunami on structures and infrastructureEngineering Structures, 28
(2006)
Researches on the earthquake resistance capacity of concrete frames reinforced with high strength steel
(2010)
General observation of effects of the 30th september 2009 padang earthquake, indonesia”, Bulletin of the New Zealand Society for Earthquake Engineering, Vol
S. Antoniou, R. Pinho (2004)
DEVELOPMENT AND VERIFICATION OF A DISPLACEMENT-BASED ADAPTIVE PUSHOVER PROCEDUREJournal of Earthquake Engineering, 8
A. Doğangün (2004)
Performance of reinforced concrete buildings during the May 1, 2003 Bingöl Earthquake in TurkeyEngineering Structures, 26
L. Ye, Z. Qu (2009)
Failure mechanism and its control of building structures under earthquakes based on structural system conceptJournal of Earthquake and Tsunami, 03
(2001)
Seismic evaluation of columnto-beam strength ratios in reinforced concrete frames”, ACI Structural Journal, Vol
The present paper analyses the design procedure and its impact on seismic safety of the structures. For this, a representative reinforced concrete frame building (WDS) is designed and the results are compared with similar buildings detailed with: i) Current Construction Practices (CCP); ii) the Nepal Building Code (NBC) and iii) the Modified Nepal Building Code (NBC+) recommendations. The seismic performance evaluation is done with global strength, inter-storey drift and displacement of the structures. Likewise, the sensitivity of the structural and geometrical parameters of the RC frame building is studied through nonlinear analysis. The study parameters considered for parametric analysis are column size, beam size, inter-storey height, bay length, bay width, and compressive strength of concrete. The results show that the influence on the structural behaviour, particularly by variation in column size and inter-storey height. Additionally, the influence of the seismic zone factor on reinforcement demand of the structure is studied. The result shows that structures designed for high to medium seismic hazard demands double the reinforcement in beams compared to structures in low seismic zone.
Advances in Structural Engineering – SAGE
Published: Nov 1, 2014
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.