Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

3D Documentation with TLS of Caliphal Gate (Ceuta, Spain)

3D Documentation with TLS of Caliphal Gate (Ceuta, Spain) applied sciences Article 3D Documentation with TLS of Caliphal Gate (Ceuta, Spain) 1 , 1 1 Rubén Pérez-Álvarez * , Julio Manuel de Luis-Ruiz , Raúl Pereda-García , 2 1 Gema Fernández-Maroto and Beatriz Malagón-Picón Cartographic Engineering and Mining Exploitation R+D+i Group, University of Cantabria, 39316 Torrelavega, Spain; julio.luis@unican.es (J.M.d.L.-R.); raul.pereda@unican.es (R.P.-G.); beatriz.malagon@unican.es (B.M.-P.) Department of Earth Sciences and Physics of Condensed Matter, University of Cantabria, 39316 Torrelavega, Spain; gema.fernandez@unican.es * Correspondence: ruben.perez@unican.es; Tel.:+34-942-846-526 Received: 30 June 2020; Accepted: 2 August 2020; Published: 4 August 2020 Abstract: Three-dimensional surveying with a terrestrial laser scanner (TLS) has implied a revolution in the field of 3D modeling, as this methodology provides detailed point-clouds with simplified processes of capture. In addition to the point-clouds, other outputs can be obtained, such as ortho-images, virtual itineraries, 2D cartography, and meshes, which implies a second avenue of multimedia products, such as 3D Portable Document Format (PDF) files and interactive applications. All these options are interesting for the management and broadcast of cultural heritage. The works that have been developed in this research are aimed at setting a workflow for the TLS surveying works and subsequent data management for the generation of a 3D model of the Caliphal Gate of Ceuta, which is considered as one of the most important medieval findings in Spain in recent years, and its immediate surroundings. This model and the di erent outputs that have been obtained from it allow for the continuation of the historiographic analysis of the complex, while documenting a partial stage in the development of the works of enhancement. In addition to this, these products are not only useful in terms of conservation studies or enhancement, as they are also suitable for the dissemination of the site. Special attention has been set on the paid suitable software for data management while generating the outputs, and for its application by the final users. Keywords: archaeology; survey; 3D model; point-cloud; virtual itinerary; interactive application; cultural heritage 1. Introduction Any project that implies the enhancement or development of a certain asset or space requires an adequate stage of documentation that assesses its initial state. The geometric definition that is obtained during these initial works must be applied to develop a well-founded analysis of the potential alternatives and uses for this enhancement project, so as to select the most suitable option. Geomatics plays a role of capital importance, as it links the conceptual dimension of the project, and the physical framework of reality. A simple analysis of this issue highlights the bi-directionality and the union between the works that must be held to be able to design the use for the asset (the surveying activities, which are aimed at capturing the geometry of the element of interest in an accurate way), and those to be developed to materialize the design itself (the stage of staking out). Considering the importance of geomatics in the field of the preservation and enhancement of cultural heritage, its vital contribution to the recovery or the German architectonic heritage after the Second World War can be presented. In 1885, the Royal Institute of Photogrammetry of Prussia was Appl. Sci. 2020, 10, 5377; doi:10.3390/app10155377 www.mdpi.com/journal/applsci Appl. Sci. 2020, 10, 5377 2 of 21 established. The documentation of over 1000 monuments by means of photographic plates allowed for the restoration of those which were a ected [1]. A more recent example of the application of geomatics to the preservation of cultural heritage is the surveying campaign that was developed by the Spanish National Geographic Institute (IGN) to obtain a reference framework, in terms of geometry and chromatism, for the reproduction of the Cave of Altamira [2]. These works provided an accurate definition of the volume of the cave and the polychromous ceiling by the application of classical surveying techniques and photogrammetry through a complex process, given the operative and spatial restrictions that were imposed by the environment. Three-dimensional models are common solutions to many problems in engineering and in other scientific disciplines, as they arrange the information in a more intuitive and visual way than other traditional approaches based in 2D documents. A terrestrial laser scanner (TLS) has implied a revolution in the field of surveying, both in the stages of fieldwork and data management. This is due to the nature of the equipment, which comprises a laser distance-meter and a deflector unit that allow for a sweeping of the surfaces or elements of interest with high rates of capture [3]. This high-speed observation provides an almost-continuous set of non-hierarchized data. When applying classical surveying methods, the operators must decide the relevant points or elements to measure [4], while in the case of TLS, this previous selection does not exist, as it is limited to the definition of the area to be scanned. This implies substantial benefits, such as the massive amount of data that is provided. However, disadvantages can be found: The presence of vegetation can hide the real surface of the asset, and the time required for the treatment of data is substantially increased. Files provided by TLS are high-density point-clouds, which is to say, matrices that comprise the coordinates of each scanned point (referred to the optic axis of the device), relative intensity, and three more columns which correspond to the red-green-blue (RGB) variables that define the color if the internal camera of the device is enabled while scanning. This technology has been proposed or evaluated for di erent applications, such as geotechnical studies [5–8], evaluation of coastal geodynamics [9] or geological risks [10], pathological analyses of structures [11], urban management [12], and construction control [13]. Its use has also been proposed for zoological analysis of cavernicolous fauna [14], forestry evaluations [15,16], and agriculture [17]. Several recent applications related to the enhancement, conservation, and broadcast of natural and/or cultural heritage have been mentioned [4,18–26]. Considering the latter, a correct reading and interpretation of TLS point-clouds and their combination with building information modeling (BIM) techniques can be helpful for the analysis and documentation of architectural and/or historical assets [27]. This combination can lead to the obtention of integrated systems to manage and increase the available information of a certain building [28]. This approach is particularly interesting given the fact that it solves a common problem when dealing with building information by traditional methods, which treated the analysis of particular objects as isolated entities. The functional models that can be generated with these technologies ease the discovery of relations between them [29]. It is worth noting that the application of machine and deep learning tools for the automatic classification of architectural features are promising alternatives to reduce this time-consuming task, although it has only started to be explored [30,31]. In addition to the foregoing, given the possibility to capture di erent stages of a certain project, TLS is also useful for obtaining the data that permit assessing the conservation of a certain structure [32], documenting complex processes of restoration [33], and/or generating models that, in combination with other computational tools, allow for the analysis of the e ect of interventions aimed at guaranteeing the stability of a certain building [34]. TLS can be applied not only to certain structures and sites, but also to sets of assets, or even to villages, cities, or regions. Taking into account the necessity to achieve a sustainable growth of cities, which guarantees a proper conservation of their historical cores along with an adequate architectural renovation [35], TLS outputs can be combined with geographic information systems (GIS), so as to generate 3D databases and suitable tools for urban planning [36], or the creation of executive programs Appl. Sci. 2020, 10, x FOR PEER REVIEW 3 of 21 programs for an integral enhancement of historical sites within a certain territory or region, which evaluate the current state of assets and provide them new uses that are compatible with their conservation, such as the enablement of museums [37]. Appl. Sci. 2020, 10, 5377 3 of 21 The main aim of the works that are described in this article is setting a workflow for the TLS surveying campaign and subsequent data management for the generation of a 3D model of the for an integral enhancement of historical sites within a certain territory or region, which evaluate Caliphal Gate (Ceuta, Spain) and its immediate surroundings. This model is the basis for the the current state of assets and provide them new uses that are compatible with their conservation, generation of different outputs which are suitable for the conservation, enhancement, and such as the enablement of museums [37]. dissemination of the site. The main aim of the works that are described in this article is setting a workflow for the TLS surveying campaign and subsequent data management for the generation of a 3D model of the Caliphal 2. Materials and Methods Gate (Ceuta, Spain) and its immediate surroundings. This model is the basis for the generation of di erent outputs which are suitable for the conservation, enhancement, and dissemination of the site. 2.1. Materials 2. Materials and Methods Two Leica GS-15 global positioning system (GPS) receivers were applied to observe the external control points and the vertices of the micro-geodetic network (see Sections 2.2 and 3). These two 2.1. Materials devices were used to observe in real time kinematic (RTK) mode, and the coordinates of each basis Two Leica GS-15 global positioning system (GPS) receivers were applied to observe the external were measured four times. Final coordinates were obtained by calculating the average of the control points and the vertices of the micro-geodetic network (see Sections 2.2 and 3). These two observed values, as long as the difference between them was less than 3.5 cm. devices were used to observe in real time kinematic (RTK) mode, and the coordinates of each basis For the capture of the field observables, a Leica ScanStation C5 TLS (Figure 1) was selected. The were measured four times. Final coordinates were obtained by calculating the average of the observed range of this device allows for measuring maximum distances of 300 m (it being conditioned by the values, as long as the di erence between them was less than 3.5 cm. albedo), with accuracies of about 4 mm in single measurements, and recording speeds that range For the capture of the field observables, a Leica ScanStation C5 TLS (Figure 1) was selected. between 25 The range ,00of 0 a this nd 50 device ,000allows points per for measurin second. Cert g maximum ain fe distances atures, such of 300as the m (it screen or the being conditioned user’s by the albedo), with accuracies of about 4 mm in single measurements, and recording speeds that interface, ease the register of data, avoiding the necessity to carry and use a laptop. range between 25,000 and 50,000 points per second. Certain features, such as the screen or the user ’s The GPS and TLS devices guarantee the quality of the data that are measured in the field to interface, ease the register of data, avoiding the necessity to carry and use a laptop. generate the 3D model, in terms of absolute and relative positioning. Figure 1. Leica ScanStation C5 terrestrial laser scanner (TLS). Figure 1. Leica ScanStation C5 terrestrial laser scanner (TLS). The GPS and TLS devices guarantee the quality of the data that are measured in the field to For the management of GPS data, two different software programs were applied: Leica Ski-pro generate the 3D model, in terms of absolute and relative positioning. was used to solve the GPS coordinates, and the planimetric and altimetric networks were adjusted For the management of GPS data, two di erent software programs were applied: Leica Ski-pro with Geored. was used to solve the GPS coordinates, and the planimetric and altimetric networks were adjusted Considering the management of the point-clouds obtained by means of TLS, Leica Cyclone was with Geored. chosen, not only as it was the alternative designed by the same manufacturer, but also due to it Considering the management of the point-clouds obtained by means of TLS, Leica Cyclone was robustness. Reconstructor and Geomagic Rapidform were applied to generate the mesh and to obtain chosen, not only as it was the alternative designed by the same manufacturer, but also due to it graphic outputs from it. robustness. Reconstructor and Geomagic Rapidform were applied to generate the mesh and to obtain Given the size of the files, it was necessary to count with a powerful workstation for the graphic outputs from it. Given the size of the files, it was necessary to count with a powerful workstation for the management management of point-clouds. The main characteristics of its set up are listed next: of point-clouds. The main characteristics of its set up are listed next: • Intel Core i7 3770 K, with CPU at 3.5 GHz, 3901 MHz; Intel Core i7 3770 K, with CPU at 3.5 GHz, 3901 MHz; • Four main processors and eight logical processors; • RAM: 32 GB; Appl. Sci. 2020, 10, 5377 4 of 21 Four main processors and eight logical processors; RAM: 32 GB; Hard disk: 2 TB; Graphic Card: GeForce GTX560. 2.2. Methods 2.2.1. Previous Works The possibility to work with a properly-referred system of coordinates has a critical importance for any project of heritage analysis or enhancement. This reference framework o ers benefits such as allowing for the junction of any planimetric or altimetric work related to the process of enhancement. Considering the case of Spain, there are planimetric (national geodesic network) and altimetric (high precision network) ocial reference frameworks. Hence, it is easy to obtain a local network of topographic vertices, and to characterize its points with (x,y,z) coordinates in accordance with these two reference systems. This eases the management of any surveying activity that could be required within the area. The adopted system can be summarized as it follows: European Terrestrial Reference System 1989 (ETRS89). ETRS89 replaced the regional reference system ED50 in the year 2015, after a period of coexistence of both systems (2012–2015); Planimetric Universal Transverse Mercator (UTM) coordinates, the ocial projection system since July 1970; Altimetric coordinates referred with respect to the mean sea level of Alicante (NMMA), which were obtained by means of GPS and previous junction with vertices within the precise leveling network. The main objective of these previous works was the implementation of a network of vertices outside the archaeologic complex, so that it allows for an adequate coordinate translation of the TLS point-clouds. Hence, its use provides an accurate geometric definition of the spaces that are included within the area of interest not only in relative coordinates (which would be necessary for the development of most of the measurements and observations that would be required by activities related to archaeological surveying, engineering or construction), but also in absolute coordinates according to the referred system. The sequence of activities that was followed to fulfill these objectives is listed next: Analysis of any existing network; Physical location and signaling of outside vertices; Observation with GPS of the outside vertices; Analysis, compensation, and determination of final coordinates; Digital identification and documentation of each outside vertex. 2.2.2. TLS Surveying TLS can be considered as a non-invasive technique, given the fact that the surveyor does not interact with the elements that are scanned. The strategy to capture data in an optimal way must consider three main aspects. Firstly, it is necessary to define the number of scans that are required to obtain a complete definition of the heritage element itself, according to its size or geometrical complexity. Secondly, the best location for the set of references (standard spheres or targets that will be applied to join adjacent point-clouds) with respect to the TLS must be decided, as a proper intervisibility between them is necessary. It is worth mentioning that a quasi-optimal location must be selected for all the involved elements. That is to say, those that provide the best possible quality for the final product, taking into account spatial constrictions, and guaranteeing the integrity of all the elements of value within the archaeological site. Thirdly, an adequate relative location of these reference elements must be also taken into account: A linear arrangement of the spheres or targets Appl. Sci. 2020, 10, 5377 5 of 21 would imply a mathematic indetermination and, therefore, the definition of a rotation axis instead of a joining plane for an adequate alignment of neighboring scans. After setting the TLS and the references in the selected locations, several data, such as the resolution, accuracy, record number, or destiny and format of the file, must be selected or defined to start the scanning process. A previous low-resolution scan can help to define both the area to be captured by a more detailed subsequent scan, and to check if the location given to the di erent references with respect to the TLS is adequate. In this regard, it is advisable that the capture has a suitable resolution for the element that is modeled. Some devices even allow for naming of these references, which eases the management of the point-clouds in later stages. It is worth noting that, in addition to this, the development of sketches in field notebooks that include the location of the device and the references, and any other helpful detail of the lay out, can be very interesting to simplify these tasks, especially if data were surveyed and managed by di erent sta members. Any registered point belonging to a certain cloud will be defined by its spherical or Cartesian coordinates, with respect to the optical center of the device. It is possible to relate both types of coordinates with Equations (1) to (3), where d is the range or distance between the TLS and the point itself,  is the horizontal angle, is the elevation angle, and x, y, z are the Cartesian coordinates. These coordinates can be corrected by calibration [38]. 2 2 2 d = x + y + z (1) = arctan (2) 0 1 B C B C B C = arctan (3) B p C @ A 2 2 x + y The integrity of each raw point-cloud should be assessed on the screen of the device after the scan has been finished to confirm that it has been fully acquired. It is important to check the continuity of raw scans, since vibrations or movements of the device can break that coherence, it being necessary to repeat certain sections. The adaptation of this strategy for the particular case that is considered in this research, which is characterized by spatial constraints (such as slopes, hollows related to the excavations, heritage elements, etc.), is one of the innovations of this work. 2.2.3. Data Management According to the Desired Outputs Opposed to the simplicity of the observations, data management is time consuming and requires highly specialized personnel. The presence of the operator in charge of their treatment during the surveying activities, or at least the generation of detailed sketches and schemes by surveyors will ease this stage. Considering the experience gathered through the development of this and other works related to TLS application and modeling, the relation between the times required to survey and manage data is estimated to range between 1 and 5 for the cases of clean point-clouds or simple meshes. The characteristics of the final outputs can condition the procedures to be followed, but stages of alignment/registration, georeferencing (application of the absolute coordinates of the micro-geodetic network vertices to calculate those of the point-clouds), unifying (merging the complete set of point-clouds not only in a single file, but also in a single point-cloud), cleaning (removal of odd points, duplicated data, etc.), and exportation are common. An adequate combination of unifying and cleaning can help to reduce the total size of the files, although they imply an important consumption of time. Special attention should be paid to the process of georeferencing, as it can contribute to guarantee the accuracy of the final model. Taking into account the main aspects considered in Sections 2.2.1 and 2.2.2, every single point-cloud will have its own coordinate system. Hence, it will be necessary to consider a common reference system in order to have them joined in a single file. This process is Appl. Sci. 2020, 10, 5377 6 of 21 known as “registering” or “alignment”. Two options can be adopted for the definition of that common reference system. The relative coordinate system of one of the scans could be adopted as general system. In that case, the remaining scans should be referred with respect to the one selected as basis. The second alternative implies the adoption of an external and absolute coordinate system. In this case, the process is known as “georeferencing”. The application of UTM as absolute reference system has two main advantages: A wide-context definition is possible, and the outputs generated from 3D surveying with TLS can be integrated in other preexisting digital models, cartographies, or even in online repositories (such as Google Earth). An intermediate alternative is possible, as the di erent point-clouds can be referred to the local system of one of them, and the total set can be transformed to the absolute system in a second step. The selection of the most suitable option will depend on the size of the project itself, and the number of available control points. In the case of archaeological sites, such as the one that is proposed in this research, both the registering/alignment and the georeferencing present complications, such as the fact of being commonly developed in confined spaces or with poor lighting conditions. A combination of direct and indirect georeferencing can be required, which guarantees an e ective management of field data. The first option requires setting the TLS in points whose coordinates are known in advance, or defining them during the campaign with surveying techniques. A proper leveling, the selection of an external reference of known coordinates to orientate the device, and the height of the latter are also required to apply the direct referencing. Indirect georeferencing is based on a 3D transformation. To apply this alternative, subsequent point-clouds must be pairwise superposed, considering at least three evenly distributed points that appear in both scans and are easy to identify. If their coordinates with respect to the external reference system are known, a rapid and direct transformation will be possible. The Helmert transformation [39], which is applied for this process, is expressed in Equations (4) and (5). (X ) = (DX) + (R)(X ) (4) E i 0 1 0 1 0 1 B Dx C B Dx C B x C E i B C B C B C B C B C B C B C B C B C B C B C B C Dy = D y +   y (5) B C B C B C E 1 2 3 i B C B C B C B C B C B C @ A @ A @ A Dz Dz z E i where (X ) and (X ) are matrices that comprise the coordinates of a control point (i.e., the center of one E i of the reference spheres) with respect to the external and relative systems of coordinates respectively, (DX) is the vector used to express the translation of the origin of coordinates, R is the rotation matrix, and  is a scaling factor. It is worth noting that the scaling factor is not considered by several authors [40]. Although three is the minimum number of points that is required, a set of four points is recommended. Several point-cloud management programs, such as Leica Cyclone, allow as many points as desired to be considered, although only those that provide a better adjustment will be applied. It is worth noting that other singular features appearing in two or more scans can be applied to align them (corners in facades, windows, or doors); however, the results will o er a lower quality with respect to those obtained with standardized references. There are propagations of error models for direct and indirect georeferencing, which also include other sources of error [40,41]. The data quality indicator is the positioning accuracy of the 3D coordinates of a point in the external coordinate system, which is described by a variance–covariance matrix that is designed for each specific case. From a general point of view, it is worth mentioning the main outputs which can be obtained from TLS data: The point-clouds themselves (after the processes of registering, georeferencing, cleaning, unifying, and decimation if needed), meshes, infographics, ortho-images, and videos of virtual itineraries. The point-clouds can be considered as a final product by themselves, but they can be adopted as the basis to generate meshes and, therefore, triangulated or even texturized models. Appl. Sci. 2020, 10, 5377 7 of 21 These meshed models and the graphical outputs that they can provide constitute a second source of final products. Hence, infographics, orthoimages, and virtual itineraries can be obtained from them, too. Anyway, the list of available alternatives does not conclude with those previously mentioned, as an adequate treatment with specific software permits the inclusion of triangulated models in interactive Portable Document Format files (PDFs), easing the distribution and visualization of information, or even the implementation of interactive applications. These products o er a great potential for the enhancement of geological heritage, as their simplicity Appl. Sci. 2020, 10, x FOR PEER REVIEW 7 of 21 of use and access can help to promote the properties or sites through the 2.0 platforms. These outputs These products offer a great potential for the enhancement of geological heritage, as their can ease the management of the sites in the case of tourism activities. Virtual itineraries and interactive simplicity of use and access can help to promote the properties or sites through the 2.0 platforms. applications can be suitable tools for training both skilled and recent employees, improving their These outputs can ease the management of the sites in the case of tourism activities. Virtual itineraries knowledge about the geometry and features of the asset. They are valuable for the management of and interactive applications can be suitable tools for training both skilled and recent employees, emergences, as georeferenced point-clouds constitute a reliable source of information about the most improving their knowledge about the geometry and features of the asset. They are valuable for the useful routes to reach a certain location. Despite some restrictions associated with the size of files or management of emergences, as georeferenced point-clouds constitute a reliable source of information the impossibility to import the radiometric/colorimetric information with some common software about the most useful routes to reach a certain location. Despite some restrictions associated with the programs, such as Autocad or Microstation, the development of 2D cartography is available. The logic size of files or the impossibility to import the radiometric/colorimetric information with some evolution of this sort of computer programs will increase the application of this technology in projects common software programs, such as Autocad or Microstation, the development of 2D cartography of enhancement, although a complete replacement of other surveying techniques is not likely in a is available. The logic evolution of this sort of computer programs will increase the application of this close future. technology in projects of enhancement, although a complete replacement of other surveying tScheme echniques 1 is sho not ws like a workflow ly in a close pr fu oposal ture. for data management that is derived from the experience Scheme 1 shows a workflow proposal for data management that is derived from the experience gathered by the authors during the development of this work and some other campaigns aimed at gathered by the authors during the development of this work and some other campaigns aimed at capturing mining and geological heritage assets [19]. The scheme summarizes the di erent itineraries capturing mining and geological heritage assets [19]. The scheme summarizes the different itineraries that can be followed to obtain the outputs mentioned. However, the order could be altered. For example, that can be followed to obtain the outputs mentioned. However, the order could be altered. For a point-cloud can be initially cleaned, exported, and imported again before developing the subsequent example, a point-cloud can be initially cleaned, exported, and imported again before developing the step, so as to adopt it as the basis for any other operation instead of the raw point-cloud. This sequence subsequent step, so as to adopt it as the basis for any other operation instead of the raw point-cloud. can avoid further filtering, but requires special care, as this simplification could imply erasing any This sequence can avoid further filtering, but requires special care, as this simplification could imply standardized or geometrical reference by mistake, compromising the stages of alignment/registering erasing any standardized or geometrical reference by mistake, compromising the stages of and geo-reference. Di erent software programs can be introduced as tools for the development of alignment/registering and geo-reference. Different software programs can be introduced as tools for this management process, and this is the main reason why the observance of an adequate migration in the development of this management process, and this is the main reason why the observance of an terms of compatibility of file formats is required. adequate migration in terms of compatibility of file formats is required. Scheme 1. Workflow proposal for data management according to the desired outputs and functions. Scheme 1. Workflow proposal for data management according to the desired outputs and functions. 3. Results 3.1. Ceuta and the Caliphal Gate Ceuta (Figure 2) is a Spanish autonomous city on the Northern Coast of Africa, neighboring with Morocco. It is 14 miles away from Cádiz and, according to the Spanish National Institute of Statistics, Appl. Sci. 2020, 10, 5377 8 of 21 3. Results Appl. Sci. 2020, 10, x FOR PEER REVIEW 8 of 21 3.1. Ceuta and the Caliphal Gate Ceuta (Figure 2) is a Spanish autonomous city on the Northern Coast of Africa, neighboring 2 with its population was 84,913 inhabitants in January, 2018 [42]. Its extension is 18.5 km . The first Morocco. It is 14 miles away from Cádiz and, according to the Spanish National Institute of Statistics, evidences of human occupation in the area have an age of about 270,000 years, although the current its population was 84,913 inhabitants in January, 2018 [42]. Its extension is 18.5 km . The first evidences urban core has been inhabited for 2700 years [43]. Given its strategic position on the southern side of of human occupation in the area have an age of about 270,000 years, although the current urban core the Strait of Gibraltar, it is possible to trace several historical periods of colonization or domain: has been inhabited for 2700 years [43]. Given its strategic position on the southern side of the Strait Phoenicians, Mauritanians, Romans, Byzantines, Muslims, Portugal, the Iberian Union, and finally, of Gibraltar, it is possible to trace several historical periods of colonization or domain: Phoenicians, Spain. Mauritanians, Romans, Byzantines, Muslims, Portugal, the Iberian Union, and finally, Spain. (a) (b) Figure 2. (a) Location of Ceuta. (b) General sight of the city and the royal walls. Figure 2. (a) Location of Ceuta. (b) General sight of the city and the royal walls. The necessities of defense related to its location implied the construction of walls around the city. The necessities of defense related to its location implied the construction of walls around the The Caliphal Gate (Figure 3) is a reminiscence of the medieval defensive wall that was hidden by city. The Caliphal Gate (Figure 3) is a reminiscence of the medieval defensive wall that was hidden the subsequent works that configured the royal walls of Ceuta (Figure 2b), which were declared an by thasset e subse of cultural quent work interest s that as historical configure ensemble d the ro in yal 1985. walls of Ceuta (Figure 2b), which were declared an asset of cultural interest as historical ensemble in 1985. Appl. Sci. 2020, 10, 5377 9 of 21 Appl. Sci. 2020, 10, x FOR PEER REVIEW 9 of 21 (a) (b) (c) Figure 3. (a) Access to the archaeological site from the bailey. (b) Caliphal Gate and Wall after the Figure 3. (a) Access to the archaeological site from the bailey. (b) Caliphal Gate and Wall after the works works of enhancement. (c) Detail of the Caliphal Gate. of enhancement. (c) Detail of the Caliphal Gate. It is thought that Romans built the first closures, but no remains of walls have been found to It is thought that Romans built the first closures, but no remains of walls have been found to confirm it. The construction of the medieval wall that surrounded the Islamic medina (with the main confirm it. The construction of the medieval wall that surrounded the Islamic medina (with the main religious and politic buildings, wealthy residences, and other facilities, such as baths) was started by religious and politic buildings, wealthy residences, and other facilities, such as baths) was started Abd al Rahman III and finished by his son, al Hakam, in 962 [44]. Although the basic layout of this by Abd al Rahman III and finished by his son, al Hakam, in 962 [44]. Although the basic layout of defensive structure was maintained until 1541, it suffered severe damages through the Portuguese this defensive structure was maintained until 1541, it su ered severe damages through the Portuguese siege (1415). Those circumstances made it necessary to accomplish great works to guarantee the siege (1415). Those circumstances made it necessary to accomplish great works to guarantee the security security of the site. of the site. On June 28 2002, the Caliphal Gate and part of the medieval barrier were discovered during a On June 28 2002, the Caliphal Gate and part of the medieval barrier were discovered during a visit inside the part of the royal walls that communicates with the National Tourism Parador “La visit inside the part of the royal walls that communicates with the National Tourism Parador “La Muralla”, which was inaugurated in 1967. In fact, the archaeological site itself, with a total surface of Muralla”, which was inaugurated in 1967. In fact, the archaeological site itself, with a total surface about 60 m , was used as a cellar of the hotel. This visit was one of the activities of a congress about of about 60 m , was used as a cellar of the hotel. This visit was one of the activities of a congress fortifications [45]. Until that date, it was commonly thought that the construction of the scarp of the about fortifications [45]. Until that date, it was commonly thought that the construction of the scarp of royal moat (1541–1549), which belongs to the structures known as the Portuguese ramparts [46], had the royal moat (1541–1549), which belongs to the structures known as the Portuguese ramparts [46], removed any remain of the Caliphal Wall. This discovery demonstrated that part of it was applied as had removed any remain of the Caliphal Wall. This discovery demonstrated that part of it was a reinforcement to construct the subsequent ramparts. In fact, it was comprised between the scarp applied as a reinforcement to construct the subsequent ramparts. In fact, it was comprised between and the inner vaults that were built in 1724 [47] under the Spanish domain. The Caliphal Gate and the scarp and the inner vaults that were built in 1724 [47] under the Spanish domain. The Caliphal Wall are not the only interesting elements in the site from a historical point of view: Between 2003 Gate and Wall are not the only interesting elements in the site from a historical point of view: Between and 2009, five campaigns of excavations found Roman remains from the I to the III century A.D., such 2003 and 2009, five campaigns of excavations found Roman remains from the I to the III century A.D., as an impermeabilized circular structure which was connected to a sewage, a pit excavated in gneiss, such as an impermeabilized circular structure which was connected to a sewage, a pit excavated in or pottery [48]. Slags that were used to level the floor during the period of use and construction of gneiss, or pottery [48]. Slags that were used to level the floor during the period of use and construction the Renaissance structures were also found. of the Renaissance structures were also found. Appl. Sci. 2020, 10, 5377 10 of 21 Appl. Sci. 2020, 10, x FOR PEER REVIEW 10 of 21 3.2. Main Areas of Work 3.2. Main Areas of Work The 3D model was developed according to three main units. The first one was the Royal Walls The 3D model was developed according to three main units. The first one was the Royal Walls unit (Figure 4a), which was observed by describing an itinerary that started on the bailey, descended to unit (Figure 4a), which was observed by describing an itinerary that started on the bailey, descended the archaeological complex of Caliphal Gate (Figure 4b), and finally reached the outside of the National to the archaeological complex of Caliphal Gate (Figure 4b), and finally reached the outside of the Parador by passing through it. The units two and three were located in the Caves of “El Moro” and “El National Parador by passing through it. The units two and three were located in the Caves of “El Candelero” (Figure 4c). These two vaults are enclosed within the Royal Walls, and were represented in Moro” and “El Candelero” (Figure 4c). These two vaults are enclosed within the Royal Walls, and two independent models, which were referred to according to local coordinates. were represented in two independent models, which were referred to according to local coordinates. (a) (b) (c) Figure 4. Images obtained from point-clouds. (a) Royal walls. (b) Detail of the inner distribution of Figure 4. Images obtained from point-clouds. (a) Royal walls. (b) Detail of the inner distribution of the site. (c) Cave “El Candelero”. the site. (c) Cave “El Candelero”. 3.3. Results of the Previous Works: Micro-Geodetic Network After defining the main areas of work, six vertices were located on the bailey (101 to 106), two support points were set on the National Parador (343, 341), two other vertices on the surveillance path of the counterscarp (601, 603), and a last vertex on the Weapon Square (602). Figure 5 shows their location, and Table 1 lists their coordinates. Appl. Sci. 2020, 10, 5377 11 of 21 3.3. Results of the Previous Works: Micro-Geodetic Network After defining the main areas of work, six vertices were located on the bailey (101 to 106), two support points were set on the National Parador (343, 341), two other vertices on the surveillance path of the counterscarp (601, 603), and a last vertex on the Weapon Square (602). Figure 5 shows their location, and Table 1 lists their coordinates. Appl. Sci. 2020, 10, x FOR PEER REVIEW 11 of 21 Figure 5. Micro-geodetic network and support points. Figure 5. Micro-geodetic network and support points. Table 1. Coordinates of the micro-geodetic network vertices and the support points. Table 1. Coordinates of the micro-geodetic network vertices and the support points. Name X Y z Comments Name X Y z Comments 101 290,757.78 3,974,068.26 21.46 Vertex 101 290,757.78 3,974,068.26 21.46 Vertex 102 290,760.11 3,974,058.87 21.74 Vertex 102 290,760.11 3,974,058.87 21.74 Vertex 103 290,762.17 3,974,048.03 22.07 Vertex 104 290,764.04 3,974,034.92 22.53 Vertex 103 290,762.17 3,974,048.03 22.07 Vertex 105 290,763.48 3,974,020.65 23.09 Vertex 104 290,764.04 3,974,034.92 22.53 Vertex 106 290,756.43 3,974,017.03 23.35 Vertex 105 290,763.48 3,974,020.65 23.09 Vertex 341 290,789.26 3,974,024.05 12.28 Support point 343 290,776.47 3,974,031.61 12.50 Support point 106 290,756.43 3,974,017.03 23.35 Vertex 601 290,704.39 3,974,111.90 9.51 Support point 341 290,789.26 3,974,024.05 12.28 Support point 602 290,662.62 3,974,094.87 7.94 Support point 343 290,776.47 3,974,031.61 12.50 Support point 603 290,712.23 3,974,059.13 11.39 Support point 601 290,704.39 3,974,111.90 9.51 Support point 602 290,662.62 3,974,094.87 7.94 Support point The accuracy of the network had to be enough to guarantee the coherence with the subsequent 603 290,712.23 3,974,059.13 11.39 Support point representation of the 3D model, considering a scale of 1:500. The vertices of the micro-geodetic network and the support points were referred to with respect to the permanent station in Ceuta Heliport, The accuracy of the network had to be enough to guarantee the coherence with the subsequent which belongs to the National Network of Reference Stations (ERGNSS) and the European Network of representatio Permanent n of the Stations3D (EUREF model, con , EPN). Ts wo idering GPS devices a scale of were1:500. T used to observe he vertices o in RTKf the micro mode, recor-di ge ng odetic the coordinates of each basis four times. Final coordinates were obtained by calculating the average network and the support points were referred to with respect to the permanent station in Ceuta of the observed values, as long as the di erence between them was lesser than 3.5 cm. This value Heliport, which belongs to the National Network of Reference Stations (ERGNSS) and the European can be assumed as the accuracy provided for the absolute coordinates of the point-clouds that were Network of Permanent Stations (EUREF, EPN). Two GPS devices were used to observe in RTK mode, produced, and it is sucient for most works in the fields of topography and cartography. However, recording the coordinates of each basis four times. Final coordinates were obtained by calculating the 4 mm can be o ered as the accuracy provided by TLS for simple measurements when working in average of the observed values, as long as the difference between them was lesser than 3.5 cm. This relative coordinates. value can be assumed as the accuracy provided for the absolute coordinates of the point-clouds that were produced, and it is sufficient for most works in the fields of topography and cartography. However, 4 mm can be offered as the accuracy provided by TLS for simple measurements when working in relative coordinates. 3.4. Point-Clouds For this work, 23 scans were acquired, with 427 million points and a total size of 23.5 GB. Had the complete set of scans been taken, it would have been necessary to register them as a single point- cloud. As mentioned in Section 2.2.3., the whole set can be referred to according to one of the point- clouds, or geo-referred with respect to an absolute system. In order to develop this procedure, it was necessary to apply a software tool that allowed the algorithm for this transformation to be defined. In this case, as it has been previously mentioned, ETRS89 was adopted as the universal system of reference. Leica Cyclone was applied for the transformation of coordinates. This specialized software offers great advantages when working with Appl. Sci. 2020, 10, 5377 12 of 21 3.4. Point-Clouds For this work, 23 scans were acquired, with 427 million points and a total size of 23.5 GB. Had the complete set of scans been taken, it would have been necessary to register them as a single point-cloud. As mentioned in Section 2.2.3., the whole set can be referred to according to one of the point-clouds, or geo-referred with respect to an absolute system. In order to develop this procedure, it was necessary to apply a software tool that allowed the algorithm for this transformation to be defined. In this case, as it has been previously mentioned, ETRS89 was adopted as the universal system of reference. Leica Cyclone was applied for the transformation of coordinates. This specialized software offers great advantages when working with point-clouds obtained by using devices from the same manufacturer, although it allows for files acquired with TLSs developed by other companies to be imported. After choosing the tool for the primary management of the point-clouds, the micro-geodetic network of vertices and the support points had to be considered in order to determine the correspondences between the registered references within the point-clouds, and their homologues in reality. Hence, it was possible to set the conditions that were needed for the aimed transformations. The registering process is characterized by the generation of data bases to allocate the model spaces that are generated from a single scan, or by the junction of two or more. This is a process that requires the development of intermediate nested workspaces to integrate the di erent scans that were acquired during the fieldwork. As final steps, the georeferencing, cleaning, and depuration of the previously registered point-clouds can be mentioned. This process generates projects that increase the already intensive requirements of available memory to storage them. It is worth mentioning that, after importing the files, developing the first tempting registers, and developing the final georeferenced joins previous to exportation, the absolute size of the data base associated to the project was 90.1 GB. 3.5. Meshes Given the great amount of data associated to the point-clouds, the initial step that was followed to obtain the triangulated 3D model implied the analysis of the main available alternatives. Reconstructor and Geomagic Rapidform were considered as the most suitable tools for this work. Most of the management was developed with the latter, while the first one was applied to achieve an intelligent partition of the general model, so as to obtain uniform sections in terms of size, and to optimize the management of data. After the initial importation and adequation of files with Reconstructor, a step of filtering was followed to enhance the definition of the elements, and the point-clouds were meshed, reducing the empty areas that were not accessible for the TLS to scan, due to the geometry of the spaces and its relative location with respect to the device. Afterwards, the individual sections were joined as a single entity. The final step implied the exportation of the digital model to a compatible *.ply file. An e ective routine for the treatment of point-clouds and meshes had to observe the kind of intermediate files that it generated, since problems of compatibility are common even with file formats that should be accepted without problems by post-processing programs, as declared in their specification sheets. Considering the first and main unit of this work, which includes the Caliphal Gate, the mesh was divided into 13 archives to ease its management, with a total size of 3.01 GB. Another lighter version was exported, with a size of 494 MB. The treatment of the files belonging to the Caves (“El Moro” and “El Candelero”) followed the same steps, but they were exported as auto-executable files. 3.6. Other Outputs of Interest Treated point-clouds and meshes are the basis for the development of a set of outputs that imply important benefits for the management and broadcast of the cultural asset that is modeled. In this case, orthoimages, virtual itineraries, and an interactive application were the main products. Appl. Sci. 2020, 10, 5377 13 of 21 3.6.1. Orthoimages Eight orthoimages were obtained from the unified point-cloud (Figure 6), and the other five from the meshed model (Figure 7a). These images show elements of special interest within the archaeological site, such as the Caliphal Gate or the original patterned medieval paintings on one of its side walls (Figure 7b). The tools that were applied to generate these orthoimages di ered when working with point-clouds or meshes, although the process was the same in both cases. In this work, orthoimages from point-clouds were obtained with Leica Cyclone, and Geomagic Rapidform was applied for those that were generated from meshes. Appl. Sci. 2020, 10, x FOR PEER REVIEW 13 of 21 Figure 6. Orthoimage obtained from the point-cloud. Figure 6. Orthoimage obtained from the point-cloud. Considering the process of obtention, the first step implied selecting the area of interest. After that, a reference plane was defined. This plane had to be significant for the element that is needed to represent. Orthographic projection was selected to obtain the image: Given the fact that the projective rays are parallel in this perspective, any distortion associated with the viewer’s position or that of the element was avoided. A virtual camera had to be perpendicularly placed with respect to the reference plane (and therefore, to the element itself). After following these steps, the elements that were included within the screen should be exported to a suitable format. Appl. Sci. 2020, 10, 5377 14 of 21 Appl. Sci. 2020, 10, x FOR PEER REVIEW 14 of 21 (a) (b) Figure 7. Orthoimages obtained from the meshed model. (a) Frontal view of the gate. (b) Adjacent Figure 7. Orthoimages obtained from the meshed model. (a) Frontal view of the gate. (b) Adjacent wall with remains of medieval patterned paintings. wall with remains of medieval patterned paintings. Considering the process of obtention, the first step implied selecting the area of interest. After that, 3.6.2. Virtual Itineraries a reference plane was defined. This plane had to be significant for the element that is needed to Software tools applied for the management and meshing of the point-clouds allow the represent. Orthographic projection was selected to obtain the image: Given the fact that the projective possibility to set itineraries to be followed by a virtual viewer of a certain height. The process that is rays are parallel in this perspective, any distortion associated with the viewer ’s position or that needed to follow in order to define these itineraries implies locating a series of individual virtual of the element was avoided. A virtual camera had to be perpendicularly placed with respect to cameras, which will act as nodes or sights comprised by the itinerary. It is worth noting that the the reference plane (and therefore, to the element itself). After following these steps, the elements that height is not needed to be a constant. This contributes to varying the experience associated with the were included within the screen should be exported to a suitable format. visualization of the video, which is the final format of the itinerary. Hence, it is possible to emulate 3.6.2. Virtual Itineraries the point of view of a potential visitor to the archaeological site or, for example, to get the perspective of a drone that flew through the asset. Software tools applied for the management and meshing of the point-clouds allow the possibility After defining the different locations for the virtual camera, it is necessary to generate a spline to set itineraries to be followed by a virtual viewer of a certain height. The process that is needed to curve that contains them (Figure 8a). This curve is representative of the viewer’s displacement follow in order to define these itineraries implies locating a series of individual virtual cameras, which through the model, and it conditions the final result. The definition of the curve must be accurate will act as nodes or sights comprised by the itinerary. It is worth noting that the height is not needed to enough to guarantee an adequate feeling of realism: Effects such as penetration through walls should be a constant. This contributes to varying the experience associated with the visualization of the video, be avoided to increase it. An adequate definition of the itinerary can simulate the rotation of the which is the final format of the itinerary. Hence, it is possible to emulate the point of view of a potential whole model or of certain parts of special interest, thus providing important and non-exclusively visitor to the archaeological site or, for example, to get the perspective of a drone that flew through geometric information in a fast and intuitive way. the asset. Had the itinerary been defined, it would have been necessary to define aspects such as the speed After defining the di erent locations for the virtual camera, it is necessary to generate a spline of the displacement, or other desired features of the exported video (such as the grade of compression curve that contains them (Figure 8a). This curve is representative of the viewer ’s displacement through or the dimensions or format of the screen). the model, and it conditions the final result. The definition of the curve must be accurate enough to Considering this work, eight different videos were developed, six of them from the basis of the guarantee an adequate feeling of realism: E ects such as penetration through walls should be avoided point-clouds (Figure 8b), and two more from the meshes. The process to generate the latter two was to increase it. An adequate definition of the itinerary can simulate the rotation of the whole model or of the same as the one described for point-clouds. These videos had durations from 1:00 to 1:30 min, certain parts of special interest, thus providing important and non-exclusively geometric information and sizes between 788 MB and 2.37 GB. In addition to them, another itinerary was developed from in a fast and intuitive way. the meshed model, with a length of 4:20 and a size of 1.84 GB (Figure 8). The main aim of these videos was the dissemination of the site, and the documentation of the state of the works of enhancement in an intermediate stage. Two main types of videos were generated. The first one was based in the generation of rotations. Hence, three different files were generated. The first one implied the rotation of the whole point-clouds set, including those taken outside the complex. The second video included the indoor complex and part of the royal walls. It was particularly appreciated by the archaeologist, as it provided an idea of the location and distribution of the asset within the walls. The third one, Appl. Sci. 2020, 10, x FOR PEER REVIEW 15 of 21 which can be found online [49], comprised the rotation of the gate itself. The rest of the videos were designed as itineraries through the site. The liberty that this alternative offered when setting the paths to be followed by the cameras allowed routes that are not limited to those that would be followed by a visitor to be established, as it was possible to adopt more creative options, including flights. In this case, the two options were explored: The most realistic one considered the simulation of a visitor’s walkthroughs (e.g., starting from the allure, going down through the site, and reaching the outside Appl. Sci. 2020, 10, 5377 15 of 21 by crossing the National Parador), while the second alternative implied the introduction of flights (crossing the channel and getting into the site through a window, or within the inner complex). (a) (b) (c) Figure 8. Virtual itineraries. (a) Virtual cameras and spline that generate the walkthrough. (b) Frame Figure 8. Virtual itineraries. (a) Virtual cameras and spline that generate the walkthrough. (b) Frame of the output obtained from point-cloud. (c) Frame of the video generated from the mesh. of the output obtained from point-cloud. (c) Frame of the video generated from the mesh. Had the itinerary been defined, it would have been necessary to define aspects such as the speed 3.6.3. Interactive Application of the displacement, or other desired features of the exported video (such as the grade of compression or the dimensions or format of the screen). One of the most interesting outputs obtained from the 3D model was the interactive application Considering this work, eight di erent videos were developed, six of them from the basis of (Figure 9), which can be considered as the natural next step to be taken in order to enhance the user’s the point-clouds (Figure 8b), and two more from the meshes. The process to generate the latter experience, as the possibility to decide the way to be followed through the 3D scenery is enabled. two was the same as the one described for point-clouds. These videos had durations from 1:00 to 1:30 min, and sizes between 788 MB and 2.37 GB. In addition to them, another itinerary was developed Appl. Sci. 2020, 10, 5377 16 of 21 from the meshed model, with a length of 4:20 and a size of 1.84 GB (Figure 8). The main aim of these videos was the dissemination of the site, and the documentation of the state of the works of enhancement in an intermediate stage. Two main types of videos were generated. The first one was based in the generation of rotations. Hence, three di erent files were generated. The first one implied the rotation of the whole point-clouds set, including those taken outside the complex. The second video included the indoor complex and part of the royal walls. It was particularly appreciated by the archaeologist, as it provided an idea of the location and distribution of the asset within the walls. The third one, which can be found online [49], comprised the rotation of the gate itself. The rest of the videos were designed as itineraries through the site. The liberty that this alternative o ered when setting the paths to be followed by the cameras allowed routes that are not limited to those that would be followed by a visitor to be established, as it was possible to adopt more creative options, including flights. In this case, the two options were explored: The most realistic one considered the simulation of a visitor ’s walkthroughs (e.g., starting from the allure, going down through the site, and reaching the outside by crossing the National Parador), while the second alternative implied the introduction of flights (crossing the channel and getting into the site through a window, or within the inner complex). 3.6.3. Interactive Application One of the most interesting outputs obtained from the 3D model was the interactive application (Figure 9), which can be considered as the natural next step to be taken in order to enhance the user ’s experience, as the possibility to decide the way to be followed through the 3D scenery is enabled. Appl. Sci. 2020, 10, x FOR PEER REVIEW 16 of 21 Figure 9. Interactive application. Figure 9. Interactive application. The main aim of this output was the dissemination of the asset with a tool that provides a higher The main aim of this output was the dissemination of the asset with a tool that provides a higher grade of freedom to move through the site. These products can be adapted for di erent purposes, grade of freedom to move through the site. These products can be adapted for different purposes, such as their presentation in tourism exhibitions, their online di usion as browser applications, or their such as their presentation in tourism exhibitions, their online diffusion as browser applications, or implementation in specially enabled rooms in visitor, museums, or interpretation centers. The sizes their implementation in specially enabled rooms in visitor, museums, or interpretation centers. The of the files applied to obtain the interactive application were optimized without compromising sizes of the files applied to obtain the interactive application were optimized without compromising the chromatic information. In order to achieve this reduction, the following steps were taken. the chromatic information. In order to achieve this reduction, the following steps were taken. The The chromatic information was translated into a texture map, so as to increase the quality of chromatic information was translated into a texture map, so as to increase the quality of the the information obtained from the pictures provided by the TLS camera, and the texture quality information obtained from the pictures provided by the TLS camera, and the texture quality was was enhanced by modifying the RGB levels, the contrast, brightness, etc.). The polygonal mesh was enhanced by modifying the RGB levels, the contrast, brightness, etc.). The polygonal mesh was optimized by a procedure of smart-decimation: The original density of polygons was maintained in optimized curved by and a complex procedur are eas, of smart while it -deci wasmation: reduced T in he plane origi surfaces. nal densAfter ity ofthat, polygon the textur s was e maps mainta wer ined e in curved and complex areas, while it was reduced in plane surfaces. After that, the texture maps were applied onto the optimized meshes. When this treatment of reduction and optimization was finished, the meshes were pre-processed with the software Blender. Several adjustments of scale, position, and orientation were done, and the texture and UV maps were verified. Minor defects of the mesh, such as gaps in the mesh due to the absence of points, were filled. The next step implied the use of the software Unity 3D to place the meshes in the scenery, to configure and assign materials and lighting, and to determine the itinerary and interaction with the user. Although according to the requirements of the project in this particular case they were not required, additional elements such as texts, images, or other information could be added. After concluding the ambiance, the stage of publishing started. The web player project (159 MB) and the *.exe file (551 MB) were compiled, along with the final tests, before closing the project. 4. Discussion Three-dimensional models obtained by means of TLS, on which technicians can rely to establish plans for conservation and exploitation of archaeological heritage, are characterized by rigorous metrics. They must be supported by point-clouds made with sufficient quality from both the instrumental and methodological point of view. In this sense, the previous works carried out to provide a single system of reference, the design of a good observation (especially in the case of confined spaces), the selection of an optimal resolution, and an adequate methodology for the alignment/registration are fundamental to guarantee that the propagation of the error is as small as possible, and to maximize the representativeness of the model, as it has been justified in previous sections. Given the size of the point-clouds, it is necessary to decide among several options of hardware and software for their management. This research provided a workflow for the management and generation of the outputs and suggested some suitable programs, although they are not the only available options. In this sense, Leica Cyclone, Reconstructor, Geomagic Rapidform, and Blender Appl. Sci. 2020, 10, 5377 17 of 21 applied onto the optimized meshes. When this treatment of reduction and optimization was finished, the meshes were pre-processed with the software Blender. Several adjustments of scale, position, and orientation were done, and the texture and UV maps were verified. Minor defects of the mesh, such as gaps in the mesh due to the absence of points, were filled. The next step implied the use of the software Unity 3D to place the meshes in the scenery, to configure and assign materials and lighting, and to determine the itinerary and interaction with the user. Although according to the requirements of the project in this particular case they were not required, additional elements such as texts, images, or other information could be added. After concluding the ambiance, the stage of publishing started. The web player project (159 MB) and the *.exe file (551 MB) were compiled, along with the final tests, before closing the project. 4. Discussion Three-dimensional models obtained by means of TLS, on which technicians can rely to establish plans for conservation and exploitation of archaeological heritage, are characterized by rigorous metrics. They must be supported by point-clouds made with sucient quality from both the instrumental and methodological point of view. In this sense, the previous works carried out to provide a single system of reference, the design of a good observation (especially in the case of confined spaces), the selection of an optimal resolution, and an adequate methodology for the alignment/registration are fundamental to guarantee that the propagation of the error is as small as possible, and to maximize the representativeness of the model, as it has been justified in previous sections. Given the size of the point-clouds, it is necessary to decide among several options of hardware and software for their management. This research provided a workflow for the management and generation of the outputs and suggested some suitable programs, although they are not the only available options. In this sense, Leica Cyclone, Reconstructor, Geomagic Rapidform, and Blender were applied for the processing of point-clouds and generation of meshes. Considering a practical application of the obtained outputs by the final user, it is worth discussing the possibilities associated with open-source alternatives to view, manage, and share them, as they are a ordable options that can avoid the necessity to adopt other specific tools. Alternatives such as CloudCompare or MeshLab are interesting freeware options to process point-clouds and meshes, respectively. The first one is particularly useful for the visualization of point-clouds, and it allows distances or angles to be measured. The second option is a valuable open-source option of the management of meshes, as it o ers several algorithms for their treatment, which can be more or less adequate, according to the characteristics of the model. However, MeshLab shows a higher limitation in terms of the maximum number of points that can be managed with respect to CloudCompare. The diculty to work with absolute coordinates is an important inconvenience to take into account in both cases, although this problem is not exclusive for open-source software. It is related to the use of 32-bit floating variables [19], which is today common for many management and meshing programs, and also for current graphic cards. However, CloudCompare counts with an e ective system to translate coordinates, which permits limiting the amount of significative numbers to consider when working with point-clouds. These options o er other practical advantages for the final user, such as the possibility to calculate volumes, or the di erent algorithms that they o er for the generation of surfaces. The previously described software allows models, orthoimages, and virtual itineraries to be generated from the point-clouds, but the adoption of the meshes for their development provides more tangibility and a higher degree of immersion in the element or environment represented, with the obtention of photorealistic models that maintain the metric fidelity. In this sense, these results can be useful for all the stages of conservation and enhancement of the heritage assets, given the fact that the geometric information is suitable for the development of any project of enhancement, or for the development of any constructive solution for the enablement of access, that is compatible with the integrity of the site or element. Another way to use this type of products is their application for marketing and dissemination initiatives, since a virtualization of the site implies a first approach Appl. Sci. 2020, 10, 5377 18 of 21 to potential visitors. Virtual tours and itineraries can be designed and aimed at di erent platforms and social targets, and therefore their level of interactivity can vary, depending on the final product, either video, interactive PDF, or interactive application. All these options provide a way for improving communication between the promoting organism and society, constituting interaction channels that were unimaginable a relatively short time ago, such as social networks, through multimedia products that allow for the enrichment and dynamization of their profiles. Considering the practical case of this research, a methodology of observation was developed to guarantee an optimal 3D model from the point of view of quality, which was focused more on the metric approach than on the chromatic aspects. A workflow was implemented to process the data obtained as a result of the designed methodology. Finally, we completed an analysis of products and sub-products that could be generated from the point-clouds and meshes, along with their potential application in the field of conservation, enhancement, and dissemination of archaeological heritage. The discussion of the aspects that could be improved in this research should focus on the degree of definition of the point-clouds, which was not uniform and was strongly conditioned by the relative location of the available points for the observations, and the archaeological complex itself. In addition to this, given the necessities of the operating organism, metrics were emphasized over chromatic aspects. Due to this, no complementary cameras to the one of the TLS were applied. The use of such devices would have improved the quality of textures, and therefore the realism of the model. Despite this and the variation of lighting conditions through the observation, the quality of the outputs that were obtained for conservation and the potential dissemination of the heritage asset were considered as sucient. 5. Conclusions Virtual models provide a better comprehension of actual objects, and they imply an interesting option for the solution of problems in many scientific disciplines, such as archaeology. However, TLS surveying procedures and the subsequent data management require workflows that are not formally established today. This research was focused on establishing a proposal for these workflows. A methodological strategy for data capture when working in archaeological sites, which are commonly characterized by being dicult to observe, has been set. This allows for registering data with sucient quality. A collection of di erent software programs, for both managing point-clouds and generating outputs, has been presented. The possibilities for the application of open-source programs by the final user have been emphasized, as the availability of this type of tools eases the access to the information. The results that were generated have been the basis for the analysis of potential outputs that can be suitable for conservation, enhancement, and dissemination of the assets. The works that have been developed in this research are aimed at setting the previously mentioned workflow for the generation of a 3D model of an archaeological site (the Caliphal Gate and its immediate surroundings), which allows the historiographic analysis of the complex to continue. This progress permits simulating and assessing any intervention, and provides a series of di erent sub-products for the broadcast of the site, as has been described. Author Contributions: Conceptualization, J.M.d.L.-R., R.P.-G., and R.P.-Á.; formal analysis, R.P.-Á., J.M.d.L.-R., and R.P.-G.; investigation, R.P.-Á. and J.M.d.L.-R.; methodology, J.M.d.L.-R., R.P.-G., and R.P.-Á.; fieldwork, J.M.d.L.-R., R.P.-G., and R.P.-Á.; data management, R.P.-Á. and R.P.-G.; supervision, J.M.d.L.-R. and G.F.-M.; writing—original draft, R.P.-Á., G.F.-M., and B.M.-P.; writing—review and editing, R.P.-Á., J.M.d.L.-R., R.P.-G., G.F.-M., and B.M.-P. All authors have read and agreed to the published version of the manuscript. Funding: This research was funded by the enterprise CONSTRUCCIONES JOMASA S.L., which was in charge of the project of enhancement of the Royal Walls. Acknowledgments: The authors want to express their gratitude to the enterprise to the government of the Autonomous City of Ceuta, to CONSTRUCCIONES JOMASA S.L., and to Fernando Villada, archaeologist in the Autonomous City of Ceuta and member of Instituto de Estudios Ceutíes. Appl. Sci. 2020, 10, 5377 19 of 21 Conflicts of Interest: The authors declare no conflict of interest. References 1. Ferrer Torío, R.; Ruiz Bedia, M.L. Fotogrametría aplicada al patrimonio. In El Patrimonio Histórico 10, Actas de los XVI Cursos Monográficos sobre Patrimonio Histórico; Iglesias Gil, J.M., Ed.; Servicio de Publicaciones de la Universidad de Cantabria: Santander, Spain, 2005; pp. 109–120. 2. Piña Patón, B.; Mañero García, A.; Pascual Sanz, F. Trabajos Topográficos y Altimétricos en la Cueva de Altamira. Rev. Fund. Patrim. Hist. Castilla León 2002, 8, 31–32. 3. Penasa, L.; Franceschi, M.; Petro, N.; Teza, G.; Polito, V. Integration of intensity textures and local geometry descriptors from terrestrial laser scanning to map chert in outcrops. ISPRS-J. Photogramm. Remote Sens. 2014, 93, 88–97. [CrossRef] 4. Rodríguez-Gonzálvez, P.; Mancera-Taboada, J.; González-Aguilera, D.; Muñoz-Nieto, A.; Armesto, J.A. A hybrid approach to create an archaeological visualization system for a paleolithic cave. Archaeometry 2011, 54, 565–580. [CrossRef] 5. Santana, D.; Corominas, J.; Mavrouli, O.; García Sellés, D. Magnitude-frequency relation for rockfall scars using a Terrestrial Laser Scanner. Eng. Geol. 2012, 145, 50–64. [CrossRef] 6. Hancock, G.R.; Crawter, D.; Fityius, S.G.; Chandler, J.; Wells, T. The measurement and modelling of rill erosions at angle of repose slopes in mine spoil. Earth Surf. Proc. Landforms 2008, 33, 1006–1020. [CrossRef] 7. Tarolli, P.; Calligaro, S.; Cazorzi, F.; Dalla Fontana, G. Recognition of surface flow processes influenced by roads and trails in mountain areas using high-resolution topography. Eur. J. Remote Sens. 2014, 46, 176–197. [CrossRef] 8. Kajzar, V.; Kukutsch, R.; Waclawik, P.; Konicek, P. Coal pillar deformation monitoring using terrestrial laser scanner technology in room and pillar panel—A case study from the Ostrava-Karvina coal field. In Rock Mechanics and Rock Engineering: From the Past to the Future, Proceedings of the 2016 ISRM International Symposium—Eurock 2016, Cappacocia, Turkey, 29–31 August 2016; Ulusay, R., Aydan, Ö., Gerçek, H., Ali Hindistan, M., Eds.; CRC Press: Leiden, The Netherlands, 2016; Volume 2, pp. 951–956. 9. Brodie, K.L.; Slocum, R.K.; McNinch, J.E. New insights into the physical drivers of wave runup from a continuously operating terrestrial laser scanner. In Proceedings of the MTS/IEEE Oceans, Hampton Roads, VA, USA, 14–19 October 2012. 10. Barbarella, M.; Fiani, M. Monitoring of large landslides by Terrestrial Laser Scanning techniques: Field data collection and processing. Eur. J. Remote Sens. 2013, 46, 126–151. [CrossRef] 11. Bonali, E.; Pesci, A.; Casula, G.; Boschi, E. Deformation of ancient buildings inferred by terrestrial laser scanning methodology: The Cantalovo Church case study (Northern Italy). Archaeometry 2013, 56, 703–716. [CrossRef] 12. Sampson, C.C.; Fewtrell, T.J.; Ducan, A.; Shaad, K.; Horritt, M.S.; Bates, P.D. Use of terrestrial laser scanning data to drive decimetric resolution urban inundation models. Adv. Water Resour. 2012, 41, 1–17. [CrossRef] 13. Golpavar-Fard, M.; Bohn, J.; Teizer, J.; Savarese, S.; Peña-Mora, F. Evaluation of image-based modelling and laser scanning accuracy for emerging automated performance monitoring techniques. Autom. Constr. 2012, 20, 1143–1155. [CrossRef] 14. Azmy, S.N.; Sah, S.A.; Shafie, N.J.; Grin, A.; Majid, Z.; Ismail, M.N.; Shamsir, M.S. Counting in the dark: Non-intrusive laser scanning for population counting and identifying of roosting bat. Sci. Rep. 2012, 2, 1–4. [CrossRef] [PubMed] 15. Pueschel, P. The influence of scanner parameters on the extraction of tree metrics from FARO Photon 120 laser scans. ISPRS-J. Photogramm. Remote Sens. 2013, 78, 58–68. [CrossRef] 16. Odipo, V.O.; Nickless, A.; Berger, C.; Baade, J.; Urbazaev, M.; Walther, C.; Schmullius, C. Assessment of aboveground woody biomass dynamics using terrestrial laser scanner and L-Band Data in South African Savanna. Forests 2016, 7, 294. [CrossRef] 17. Ehlert, D.; Heisig, M. Sources of angle-dependent errors in terrestrial laser scanner-based cropped stand measurement. Comput. Electron. Agric. 2013, 93, 10–16. [CrossRef] 18. Marsico, A.; Sabato, L.; Spalluto, L.; Infante, M.; Nitti, A. Integrated geological and digital surveys to know, preserve and promote a geoheritage: The Sea Cli of Vignanotica Bay (Gargano Promontory, Southern Italy). Geoheritage 2016, 8, 371–380. [CrossRef] Appl. Sci. 2020, 10, 5377 20 of 21 19. Pérez-Álvarez, R. Aplicación de las Nuevas Tecnologías Geomáticas en El Grupo Minero La Florida. In Proceedings of the I Congreso Científico Internacional de Cuevas y Minas “El Soplao”, Celis, Spain, 15–17 November 2017; De Luis-Ruiz, J.M., Pérez-Álvarez, R., Fernández Maroto, G., El Soplao, S.L., Eds.; Consejería de Innovación, Industria, Turismo y Comercio del Gobierno de Cantabria: Santander, Spain, 2017; pp. 87–104. 20. Ghiraldi, L.; Giordano, E.; Perotti, L.; Giardino, M. Digital tools for collection, promotion and visualisation of geoscientific data: Case study of Seguret Valley (Piemonte, NW Italy). Geoheritage 2014, 6, 103–112. [CrossRef] 21. Torres, J.A.; Hernández-López, D.; González-Aguilera, D.; Moreno Hidalgo, M.A. A hybrid measurement approach for archaeological site modelling and monitoring: The Case Study of Mas D’Is, Penàguila. J. Archaeol. Sci. 2014, 50, 475–483. [CrossRef] 22. Di Salvo, F.; Lo Brutto, M. Full-waveform terrestrial laser scanning for extracting a high-resolution 3D topographic model: A case study on an area of archeological significance. Eur. J. Remote Sens. 2014, 47, 307–327. [CrossRef] 23. Fregonese, L.; Barbieri, G.; Biolzi, L.; Bocciarelli, M.; Frigeri, A.; Ta urelli, L. Surveying and monitoring for vulnerability assessment of an ancient building. Sensors 2013, 13, 9747–9773. [CrossRef] 24. Bertocci, S.; Pancani, G.; Cottinin, A. The City Wall of Lastra a Signa: Integrated Digital Survey Methodologies. In Defensive Architecture of the Mediterranean; Navarro Palazón, J., García Pulido, L.J., Eds.; Universitat Politècnica de València: Valencia, Spain, 2010; Volume X, pp. 255–262. 25. Nocerino, E.; Menna, F.; Farella, E.; Remondino, F. 3D virtualization of an underground semi-submerged cave system. Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci. 2019, XLII-2/W15, 857–864. [CrossRef] 26. Bertocci, S. Il Castello templar de Peniscola, da fortezza di época crociata a cittadella tardo rinascimentale. In Defensive Architecture of the Mediterranean, XV to XVIII Centuries; Navarro Palazón, J., Ed.; Universitat Politécnica de València: Valencia, Spain, 2015; Volume II, pp. 27–32. 27. Miceli, A.; Morandotti, M.; Parrinello, S. 3D survey and semantic analysis for the documentation of built heritage. The case study of Palazzo Centrale of Pavia University. VITRUVIO Int. J. Arch. Technol. Sustain. 2020, 5, 65–80. [CrossRef] 28. Parrinello, S.; Gómez-Blanco Pontes, A.; Picchio, F.; Rodríguez-Moreno, C.; Rivas-López, E. An integrated system for documentation, analysis and management of the architectural heritage: The general and the parts of the Generalife Palace. EGA Rev. Exp. Graf. Arquit. 2019, 35, 140–151. [CrossRef] 29. Rodríguez-Moreno, C.; Reinoso-Gordo, J.F.; Rivas-López, E.; Gómez-Blanco, A.; Ariza-López, F.J.; Ariza-López, I. From point cloud to BIM: An integrated workflow for documentation, research and modelling of architectural heritage. Surv. Rev. 2018, 50, 212–231. [CrossRef] 30. Grilli, E.; Özdemir, E.; Remondino, F. Application of machine and deep learning strategies for the classification of heritage point clouds. Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci. 2019, XLII-4/W18, 447–454. [CrossRef] 31. Grilli, E.; Remondino, F. Machine learning generalization across di erent 3D architectural heritage. GISPRS Int. J. Geo-Inf. 2020, 9, 379. [CrossRef] 32. Balzani, M.; Maietti, F.; Kühl, B. Point cloud analysis for conservation and enhancement of modernist architecture. Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci. 2017, XLII-2/W3, 71–77. [CrossRef] 33. Apollonio, F.I.; Bassilissi, V.; Callieri, M.; Dellepiano, M.; Gaiani, M.; Ponchio, F.; Rizzo, F.; Rubino, A.R.; Scopigno, R.; Sobra, G. A 3D-centered information system for the documentation of a complex restoration intervention. J. Cult. Herit. 2017, 29, 89–99. [CrossRef] 34. Parrinello, S.; Porzilli, S. 3D survey systems and digital simulations for structural monitoring of rooms at the Uzi Museum in Florence. In Mechatronics for Cultural Heritage and Civil Engineering. Intelligent Systems, Control and Automation: Science and Engineering; Ottaviano, E., Pellicio, A., Galluti, V., Eds.; Springer: Cham, Switzerland, 2018; Volume 92, pp. 203–233. 35. Parrinello, S. A development project for the United Nations. The digital survey for the planning of East Jerusalem. In Putting Tradition into Practice: Heritage, Place and Design; Amoruso, G., Ed.; Springer: Cham, Switzerland, 2018; Volume 3, pp. 551–559. 36. Bertocci, S.; Bua, S.; Parrinello, S.; Picchio, F. Montepulciano 3D virtual models for urban planning and development of the urban environment. DISEGNARECON 2014, 7, 1–20. Appl. Sci. 2020, 10, 5377 21 of 21 37. Bertocci, S.; Parrinello, S. Experiences of digital documentation of carsulae on the Flaminian Way in Umbria. SCIRES-IT-Sci. Res. Inf. Technol. 2014, 4, 5–13. 38. Litchi, D.D.; Licht, G. Experiences with terrestrial laser scanner modelling and accuracy assessment. In Proceedings of the IAPRS, Part 5, Dresden, Germany, 25–27 September 2006; Maas, H.G., Schneider, D., Eds.; ISPRS: Dresden, Germany, 2006; Volume XXXVI, pp. 155–160. 39. Reshetyuk, Y. A unified approach to self-calibration of terrestrial laser scanners. ISPRS J. Photogramm. Remote Sens. 2010, 65, 445–456. [CrossRef] 40. Gordon, S.J.; Lichti, D. Terrestrial laser scanners with a narrow field of view: The e ect on 3D resection solutions. Sur. Rev. 2004, 37, 448–468. [CrossRef] 41. Reshetyuk, Y. Investigation and Calibration of Pulsed Time-of-Flight Terrestrial Laser Scanners. Master ’s Thesis, KTH Royal Institute of Technology, Stockholm, Sweden, 2006. 42. INE. Available online: https://www.ine.es/jaxiT3/Tabla.htm?t=2853&L=0n (accessed on 22 July 2020). 43. Villada Paredes, F. Arquitectura Urbana de Ceuta (2000–2005). In Actas del I Seminario Hispano-Marroquí de Especialización en Arqueología; Bernal, D., Raissouni, B., Ramos, J., Bouzouggan, A., Eds.; Servicio de Publicaciones de la Universidad de Cádiz: Cádiz, Spain, 2012; pp. 269–280. 44. Villada Paredes, F.; Gurriarán Daza, P. Recientes investigaciones sobre las fortificaciones del Califato Omeya en el estrecho de Gibraltar (Tarifa, Algeciras, Tánger, Ceuta). In Fortificações e Território na Península Ibérica e no Magreb (Séculos VI a XVI); Ferreira Fernandes, I.C., Ed.; Edições Colibri/Campo Arqueológico de Mértola: Lisboa, Portugal, 2013; Volume I, pp. 51–62. 45. Gómez Barceló, J.L. Informe sobre el hallazgo en Ceuta de una Muralla Califal. In Anuario de la Real Academia de Bellas Artes San Telmo; Canales Pérez, A., Cuenca Mendoza, J.M., Eds.; Real Academia de Bellas Artes San Telmo: Málaga, Spain, 2002; pp. 14–17. 46. Hernández de León, J.M. Rehabilitación de las Murallas de Ceuta. Rev. Arquit. 2001, 324, 55–67. 47. Gómez Barceló, J.L. Ceuta, una ciudad fortificada. Aldaba 2008, 34, 145–166. [CrossRef] 48. Villada Paredes, F. Excavaciones arqueológicas en la Muralla Real de Ceuta: Persistencias y rupturas (1415–1668). In Velhos e Novos Mundos. Estudos de Arqueologia Moderna Old and New Worlds. Studies on Early Modern Archaeology; André Teixeira, A., José António Bettencourt, J.A., Eds.; Centro de História de Além-Mar, Faculdade de Ciências Sociais e Humanas—Universidade Nova de Lisboa, Universidade dos Açores: Lisboa, Portugal, 2012; Volume 1, pp. 375–384. 49. Modelo 3D de la Puerta Califal de Ceuta—Unican.es. Available online: https://www.youtube.com/watch?v= UCC1nkiIVig (accessed on 22 July 2020). © 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/). http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Applied Sciences Multidisciplinary Digital Publishing Institute

3D Documentation with TLS of Caliphal Gate (Ceuta, Spain)

Download PDF
21 pages

Loading next page...
 
/lp/multidisciplinary-digital-publishing-institute/3d-documentation-with-tls-of-caliphal-gate-ceuta-spain-RmaEWE4Otc

References (51)

Publisher
Multidisciplinary Digital Publishing Institute
Copyright
© 1996-2020 MDPI (Basel, Switzerland) unless otherwise stated Disclaimer The statements, opinions and data contained in the journals are solely those of the individual authors and contributors and not of the publisher and the editor(s). Terms and Conditions Privacy Policy
ISSN
2076-3417
DOI
10.3390/app10155377
Publisher site
See Article on Publisher Site

Abstract

applied sciences Article 3D Documentation with TLS of Caliphal Gate (Ceuta, Spain) 1 , 1 1 Rubén Pérez-Álvarez * , Julio Manuel de Luis-Ruiz , Raúl Pereda-García , 2 1 Gema Fernández-Maroto and Beatriz Malagón-Picón Cartographic Engineering and Mining Exploitation R+D+i Group, University of Cantabria, 39316 Torrelavega, Spain; julio.luis@unican.es (J.M.d.L.-R.); raul.pereda@unican.es (R.P.-G.); beatriz.malagon@unican.es (B.M.-P.) Department of Earth Sciences and Physics of Condensed Matter, University of Cantabria, 39316 Torrelavega, Spain; gema.fernandez@unican.es * Correspondence: ruben.perez@unican.es; Tel.:+34-942-846-526 Received: 30 June 2020; Accepted: 2 August 2020; Published: 4 August 2020 Abstract: Three-dimensional surveying with a terrestrial laser scanner (TLS) has implied a revolution in the field of 3D modeling, as this methodology provides detailed point-clouds with simplified processes of capture. In addition to the point-clouds, other outputs can be obtained, such as ortho-images, virtual itineraries, 2D cartography, and meshes, which implies a second avenue of multimedia products, such as 3D Portable Document Format (PDF) files and interactive applications. All these options are interesting for the management and broadcast of cultural heritage. The works that have been developed in this research are aimed at setting a workflow for the TLS surveying works and subsequent data management for the generation of a 3D model of the Caliphal Gate of Ceuta, which is considered as one of the most important medieval findings in Spain in recent years, and its immediate surroundings. This model and the di erent outputs that have been obtained from it allow for the continuation of the historiographic analysis of the complex, while documenting a partial stage in the development of the works of enhancement. In addition to this, these products are not only useful in terms of conservation studies or enhancement, as they are also suitable for the dissemination of the site. Special attention has been set on the paid suitable software for data management while generating the outputs, and for its application by the final users. Keywords: archaeology; survey; 3D model; point-cloud; virtual itinerary; interactive application; cultural heritage 1. Introduction Any project that implies the enhancement or development of a certain asset or space requires an adequate stage of documentation that assesses its initial state. The geometric definition that is obtained during these initial works must be applied to develop a well-founded analysis of the potential alternatives and uses for this enhancement project, so as to select the most suitable option. Geomatics plays a role of capital importance, as it links the conceptual dimension of the project, and the physical framework of reality. A simple analysis of this issue highlights the bi-directionality and the union between the works that must be held to be able to design the use for the asset (the surveying activities, which are aimed at capturing the geometry of the element of interest in an accurate way), and those to be developed to materialize the design itself (the stage of staking out). Considering the importance of geomatics in the field of the preservation and enhancement of cultural heritage, its vital contribution to the recovery or the German architectonic heritage after the Second World War can be presented. In 1885, the Royal Institute of Photogrammetry of Prussia was Appl. Sci. 2020, 10, 5377; doi:10.3390/app10155377 www.mdpi.com/journal/applsci Appl. Sci. 2020, 10, 5377 2 of 21 established. The documentation of over 1000 monuments by means of photographic plates allowed for the restoration of those which were a ected [1]. A more recent example of the application of geomatics to the preservation of cultural heritage is the surveying campaign that was developed by the Spanish National Geographic Institute (IGN) to obtain a reference framework, in terms of geometry and chromatism, for the reproduction of the Cave of Altamira [2]. These works provided an accurate definition of the volume of the cave and the polychromous ceiling by the application of classical surveying techniques and photogrammetry through a complex process, given the operative and spatial restrictions that were imposed by the environment. Three-dimensional models are common solutions to many problems in engineering and in other scientific disciplines, as they arrange the information in a more intuitive and visual way than other traditional approaches based in 2D documents. A terrestrial laser scanner (TLS) has implied a revolution in the field of surveying, both in the stages of fieldwork and data management. This is due to the nature of the equipment, which comprises a laser distance-meter and a deflector unit that allow for a sweeping of the surfaces or elements of interest with high rates of capture [3]. This high-speed observation provides an almost-continuous set of non-hierarchized data. When applying classical surveying methods, the operators must decide the relevant points or elements to measure [4], while in the case of TLS, this previous selection does not exist, as it is limited to the definition of the area to be scanned. This implies substantial benefits, such as the massive amount of data that is provided. However, disadvantages can be found: The presence of vegetation can hide the real surface of the asset, and the time required for the treatment of data is substantially increased. Files provided by TLS are high-density point-clouds, which is to say, matrices that comprise the coordinates of each scanned point (referred to the optic axis of the device), relative intensity, and three more columns which correspond to the red-green-blue (RGB) variables that define the color if the internal camera of the device is enabled while scanning. This technology has been proposed or evaluated for di erent applications, such as geotechnical studies [5–8], evaluation of coastal geodynamics [9] or geological risks [10], pathological analyses of structures [11], urban management [12], and construction control [13]. Its use has also been proposed for zoological analysis of cavernicolous fauna [14], forestry evaluations [15,16], and agriculture [17]. Several recent applications related to the enhancement, conservation, and broadcast of natural and/or cultural heritage have been mentioned [4,18–26]. Considering the latter, a correct reading and interpretation of TLS point-clouds and their combination with building information modeling (BIM) techniques can be helpful for the analysis and documentation of architectural and/or historical assets [27]. This combination can lead to the obtention of integrated systems to manage and increase the available information of a certain building [28]. This approach is particularly interesting given the fact that it solves a common problem when dealing with building information by traditional methods, which treated the analysis of particular objects as isolated entities. The functional models that can be generated with these technologies ease the discovery of relations between them [29]. It is worth noting that the application of machine and deep learning tools for the automatic classification of architectural features are promising alternatives to reduce this time-consuming task, although it has only started to be explored [30,31]. In addition to the foregoing, given the possibility to capture di erent stages of a certain project, TLS is also useful for obtaining the data that permit assessing the conservation of a certain structure [32], documenting complex processes of restoration [33], and/or generating models that, in combination with other computational tools, allow for the analysis of the e ect of interventions aimed at guaranteeing the stability of a certain building [34]. TLS can be applied not only to certain structures and sites, but also to sets of assets, or even to villages, cities, or regions. Taking into account the necessity to achieve a sustainable growth of cities, which guarantees a proper conservation of their historical cores along with an adequate architectural renovation [35], TLS outputs can be combined with geographic information systems (GIS), so as to generate 3D databases and suitable tools for urban planning [36], or the creation of executive programs Appl. Sci. 2020, 10, x FOR PEER REVIEW 3 of 21 programs for an integral enhancement of historical sites within a certain territory or region, which evaluate the current state of assets and provide them new uses that are compatible with their conservation, such as the enablement of museums [37]. Appl. Sci. 2020, 10, 5377 3 of 21 The main aim of the works that are described in this article is setting a workflow for the TLS surveying campaign and subsequent data management for the generation of a 3D model of the for an integral enhancement of historical sites within a certain territory or region, which evaluate Caliphal Gate (Ceuta, Spain) and its immediate surroundings. This model is the basis for the the current state of assets and provide them new uses that are compatible with their conservation, generation of different outputs which are suitable for the conservation, enhancement, and such as the enablement of museums [37]. dissemination of the site. The main aim of the works that are described in this article is setting a workflow for the TLS surveying campaign and subsequent data management for the generation of a 3D model of the Caliphal 2. Materials and Methods Gate (Ceuta, Spain) and its immediate surroundings. This model is the basis for the generation of di erent outputs which are suitable for the conservation, enhancement, and dissemination of the site. 2.1. Materials 2. Materials and Methods Two Leica GS-15 global positioning system (GPS) receivers were applied to observe the external control points and the vertices of the micro-geodetic network (see Sections 2.2 and 3). These two 2.1. Materials devices were used to observe in real time kinematic (RTK) mode, and the coordinates of each basis Two Leica GS-15 global positioning system (GPS) receivers were applied to observe the external were measured four times. Final coordinates were obtained by calculating the average of the control points and the vertices of the micro-geodetic network (see Sections 2.2 and 3). These two observed values, as long as the difference between them was less than 3.5 cm. devices were used to observe in real time kinematic (RTK) mode, and the coordinates of each basis For the capture of the field observables, a Leica ScanStation C5 TLS (Figure 1) was selected. The were measured four times. Final coordinates were obtained by calculating the average of the observed range of this device allows for measuring maximum distances of 300 m (it being conditioned by the values, as long as the di erence between them was less than 3.5 cm. albedo), with accuracies of about 4 mm in single measurements, and recording speeds that range For the capture of the field observables, a Leica ScanStation C5 TLS (Figure 1) was selected. between 25 The range ,00of 0 a this nd 50 device ,000allows points per for measurin second. Cert g maximum ain fe distances atures, such of 300as the m (it screen or the being conditioned user’s by the albedo), with accuracies of about 4 mm in single measurements, and recording speeds that interface, ease the register of data, avoiding the necessity to carry and use a laptop. range between 25,000 and 50,000 points per second. Certain features, such as the screen or the user ’s The GPS and TLS devices guarantee the quality of the data that are measured in the field to interface, ease the register of data, avoiding the necessity to carry and use a laptop. generate the 3D model, in terms of absolute and relative positioning. Figure 1. Leica ScanStation C5 terrestrial laser scanner (TLS). Figure 1. Leica ScanStation C5 terrestrial laser scanner (TLS). The GPS and TLS devices guarantee the quality of the data that are measured in the field to For the management of GPS data, two different software programs were applied: Leica Ski-pro generate the 3D model, in terms of absolute and relative positioning. was used to solve the GPS coordinates, and the planimetric and altimetric networks were adjusted For the management of GPS data, two di erent software programs were applied: Leica Ski-pro with Geored. was used to solve the GPS coordinates, and the planimetric and altimetric networks were adjusted Considering the management of the point-clouds obtained by means of TLS, Leica Cyclone was with Geored. chosen, not only as it was the alternative designed by the same manufacturer, but also due to it Considering the management of the point-clouds obtained by means of TLS, Leica Cyclone was robustness. Reconstructor and Geomagic Rapidform were applied to generate the mesh and to obtain chosen, not only as it was the alternative designed by the same manufacturer, but also due to it graphic outputs from it. robustness. Reconstructor and Geomagic Rapidform were applied to generate the mesh and to obtain Given the size of the files, it was necessary to count with a powerful workstation for the graphic outputs from it. Given the size of the files, it was necessary to count with a powerful workstation for the management management of point-clouds. The main characteristics of its set up are listed next: of point-clouds. The main characteristics of its set up are listed next: • Intel Core i7 3770 K, with CPU at 3.5 GHz, 3901 MHz; Intel Core i7 3770 K, with CPU at 3.5 GHz, 3901 MHz; • Four main processors and eight logical processors; • RAM: 32 GB; Appl. Sci. 2020, 10, 5377 4 of 21 Four main processors and eight logical processors; RAM: 32 GB; Hard disk: 2 TB; Graphic Card: GeForce GTX560. 2.2. Methods 2.2.1. Previous Works The possibility to work with a properly-referred system of coordinates has a critical importance for any project of heritage analysis or enhancement. This reference framework o ers benefits such as allowing for the junction of any planimetric or altimetric work related to the process of enhancement. Considering the case of Spain, there are planimetric (national geodesic network) and altimetric (high precision network) ocial reference frameworks. Hence, it is easy to obtain a local network of topographic vertices, and to characterize its points with (x,y,z) coordinates in accordance with these two reference systems. This eases the management of any surveying activity that could be required within the area. The adopted system can be summarized as it follows: European Terrestrial Reference System 1989 (ETRS89). ETRS89 replaced the regional reference system ED50 in the year 2015, after a period of coexistence of both systems (2012–2015); Planimetric Universal Transverse Mercator (UTM) coordinates, the ocial projection system since July 1970; Altimetric coordinates referred with respect to the mean sea level of Alicante (NMMA), which were obtained by means of GPS and previous junction with vertices within the precise leveling network. The main objective of these previous works was the implementation of a network of vertices outside the archaeologic complex, so that it allows for an adequate coordinate translation of the TLS point-clouds. Hence, its use provides an accurate geometric definition of the spaces that are included within the area of interest not only in relative coordinates (which would be necessary for the development of most of the measurements and observations that would be required by activities related to archaeological surveying, engineering or construction), but also in absolute coordinates according to the referred system. The sequence of activities that was followed to fulfill these objectives is listed next: Analysis of any existing network; Physical location and signaling of outside vertices; Observation with GPS of the outside vertices; Analysis, compensation, and determination of final coordinates; Digital identification and documentation of each outside vertex. 2.2.2. TLS Surveying TLS can be considered as a non-invasive technique, given the fact that the surveyor does not interact with the elements that are scanned. The strategy to capture data in an optimal way must consider three main aspects. Firstly, it is necessary to define the number of scans that are required to obtain a complete definition of the heritage element itself, according to its size or geometrical complexity. Secondly, the best location for the set of references (standard spheres or targets that will be applied to join adjacent point-clouds) with respect to the TLS must be decided, as a proper intervisibility between them is necessary. It is worth mentioning that a quasi-optimal location must be selected for all the involved elements. That is to say, those that provide the best possible quality for the final product, taking into account spatial constrictions, and guaranteeing the integrity of all the elements of value within the archaeological site. Thirdly, an adequate relative location of these reference elements must be also taken into account: A linear arrangement of the spheres or targets Appl. Sci. 2020, 10, 5377 5 of 21 would imply a mathematic indetermination and, therefore, the definition of a rotation axis instead of a joining plane for an adequate alignment of neighboring scans. After setting the TLS and the references in the selected locations, several data, such as the resolution, accuracy, record number, or destiny and format of the file, must be selected or defined to start the scanning process. A previous low-resolution scan can help to define both the area to be captured by a more detailed subsequent scan, and to check if the location given to the di erent references with respect to the TLS is adequate. In this regard, it is advisable that the capture has a suitable resolution for the element that is modeled. Some devices even allow for naming of these references, which eases the management of the point-clouds in later stages. It is worth noting that, in addition to this, the development of sketches in field notebooks that include the location of the device and the references, and any other helpful detail of the lay out, can be very interesting to simplify these tasks, especially if data were surveyed and managed by di erent sta members. Any registered point belonging to a certain cloud will be defined by its spherical or Cartesian coordinates, with respect to the optical center of the device. It is possible to relate both types of coordinates with Equations (1) to (3), where d is the range or distance between the TLS and the point itself,  is the horizontal angle, is the elevation angle, and x, y, z are the Cartesian coordinates. These coordinates can be corrected by calibration [38]. 2 2 2 d = x + y + z (1) = arctan (2) 0 1 B C B C B C = arctan (3) B p C @ A 2 2 x + y The integrity of each raw point-cloud should be assessed on the screen of the device after the scan has been finished to confirm that it has been fully acquired. It is important to check the continuity of raw scans, since vibrations or movements of the device can break that coherence, it being necessary to repeat certain sections. The adaptation of this strategy for the particular case that is considered in this research, which is characterized by spatial constraints (such as slopes, hollows related to the excavations, heritage elements, etc.), is one of the innovations of this work. 2.2.3. Data Management According to the Desired Outputs Opposed to the simplicity of the observations, data management is time consuming and requires highly specialized personnel. The presence of the operator in charge of their treatment during the surveying activities, or at least the generation of detailed sketches and schemes by surveyors will ease this stage. Considering the experience gathered through the development of this and other works related to TLS application and modeling, the relation between the times required to survey and manage data is estimated to range between 1 and 5 for the cases of clean point-clouds or simple meshes. The characteristics of the final outputs can condition the procedures to be followed, but stages of alignment/registration, georeferencing (application of the absolute coordinates of the micro-geodetic network vertices to calculate those of the point-clouds), unifying (merging the complete set of point-clouds not only in a single file, but also in a single point-cloud), cleaning (removal of odd points, duplicated data, etc.), and exportation are common. An adequate combination of unifying and cleaning can help to reduce the total size of the files, although they imply an important consumption of time. Special attention should be paid to the process of georeferencing, as it can contribute to guarantee the accuracy of the final model. Taking into account the main aspects considered in Sections 2.2.1 and 2.2.2, every single point-cloud will have its own coordinate system. Hence, it will be necessary to consider a common reference system in order to have them joined in a single file. This process is Appl. Sci. 2020, 10, 5377 6 of 21 known as “registering” or “alignment”. Two options can be adopted for the definition of that common reference system. The relative coordinate system of one of the scans could be adopted as general system. In that case, the remaining scans should be referred with respect to the one selected as basis. The second alternative implies the adoption of an external and absolute coordinate system. In this case, the process is known as “georeferencing”. The application of UTM as absolute reference system has two main advantages: A wide-context definition is possible, and the outputs generated from 3D surveying with TLS can be integrated in other preexisting digital models, cartographies, or even in online repositories (such as Google Earth). An intermediate alternative is possible, as the di erent point-clouds can be referred to the local system of one of them, and the total set can be transformed to the absolute system in a second step. The selection of the most suitable option will depend on the size of the project itself, and the number of available control points. In the case of archaeological sites, such as the one that is proposed in this research, both the registering/alignment and the georeferencing present complications, such as the fact of being commonly developed in confined spaces or with poor lighting conditions. A combination of direct and indirect georeferencing can be required, which guarantees an e ective management of field data. The first option requires setting the TLS in points whose coordinates are known in advance, or defining them during the campaign with surveying techniques. A proper leveling, the selection of an external reference of known coordinates to orientate the device, and the height of the latter are also required to apply the direct referencing. Indirect georeferencing is based on a 3D transformation. To apply this alternative, subsequent point-clouds must be pairwise superposed, considering at least three evenly distributed points that appear in both scans and are easy to identify. If their coordinates with respect to the external reference system are known, a rapid and direct transformation will be possible. The Helmert transformation [39], which is applied for this process, is expressed in Equations (4) and (5). (X ) = (DX) + (R)(X ) (4) E i 0 1 0 1 0 1 B Dx C B Dx C B x C E i B C B C B C B C B C B C B C B C B C B C B C B C Dy = D y +   y (5) B C B C B C E 1 2 3 i B C B C B C B C B C B C @ A @ A @ A Dz Dz z E i where (X ) and (X ) are matrices that comprise the coordinates of a control point (i.e., the center of one E i of the reference spheres) with respect to the external and relative systems of coordinates respectively, (DX) is the vector used to express the translation of the origin of coordinates, R is the rotation matrix, and  is a scaling factor. It is worth noting that the scaling factor is not considered by several authors [40]. Although three is the minimum number of points that is required, a set of four points is recommended. Several point-cloud management programs, such as Leica Cyclone, allow as many points as desired to be considered, although only those that provide a better adjustment will be applied. It is worth noting that other singular features appearing in two or more scans can be applied to align them (corners in facades, windows, or doors); however, the results will o er a lower quality with respect to those obtained with standardized references. There are propagations of error models for direct and indirect georeferencing, which also include other sources of error [40,41]. The data quality indicator is the positioning accuracy of the 3D coordinates of a point in the external coordinate system, which is described by a variance–covariance matrix that is designed for each specific case. From a general point of view, it is worth mentioning the main outputs which can be obtained from TLS data: The point-clouds themselves (after the processes of registering, georeferencing, cleaning, unifying, and decimation if needed), meshes, infographics, ortho-images, and videos of virtual itineraries. The point-clouds can be considered as a final product by themselves, but they can be adopted as the basis to generate meshes and, therefore, triangulated or even texturized models. Appl. Sci. 2020, 10, 5377 7 of 21 These meshed models and the graphical outputs that they can provide constitute a second source of final products. Hence, infographics, orthoimages, and virtual itineraries can be obtained from them, too. Anyway, the list of available alternatives does not conclude with those previously mentioned, as an adequate treatment with specific software permits the inclusion of triangulated models in interactive Portable Document Format files (PDFs), easing the distribution and visualization of information, or even the implementation of interactive applications. These products o er a great potential for the enhancement of geological heritage, as their simplicity Appl. Sci. 2020, 10, x FOR PEER REVIEW 7 of 21 of use and access can help to promote the properties or sites through the 2.0 platforms. These outputs These products offer a great potential for the enhancement of geological heritage, as their can ease the management of the sites in the case of tourism activities. Virtual itineraries and interactive simplicity of use and access can help to promote the properties or sites through the 2.0 platforms. applications can be suitable tools for training both skilled and recent employees, improving their These outputs can ease the management of the sites in the case of tourism activities. Virtual itineraries knowledge about the geometry and features of the asset. They are valuable for the management of and interactive applications can be suitable tools for training both skilled and recent employees, emergences, as georeferenced point-clouds constitute a reliable source of information about the most improving their knowledge about the geometry and features of the asset. They are valuable for the useful routes to reach a certain location. Despite some restrictions associated with the size of files or management of emergences, as georeferenced point-clouds constitute a reliable source of information the impossibility to import the radiometric/colorimetric information with some common software about the most useful routes to reach a certain location. Despite some restrictions associated with the programs, such as Autocad or Microstation, the development of 2D cartography is available. The logic size of files or the impossibility to import the radiometric/colorimetric information with some evolution of this sort of computer programs will increase the application of this technology in projects common software programs, such as Autocad or Microstation, the development of 2D cartography of enhancement, although a complete replacement of other surveying techniques is not likely in a is available. The logic evolution of this sort of computer programs will increase the application of this close future. technology in projects of enhancement, although a complete replacement of other surveying tScheme echniques 1 is sho not ws like a workflow ly in a close pr fu oposal ture. for data management that is derived from the experience Scheme 1 shows a workflow proposal for data management that is derived from the experience gathered by the authors during the development of this work and some other campaigns aimed at gathered by the authors during the development of this work and some other campaigns aimed at capturing mining and geological heritage assets [19]. The scheme summarizes the di erent itineraries capturing mining and geological heritage assets [19]. The scheme summarizes the different itineraries that can be followed to obtain the outputs mentioned. However, the order could be altered. For example, that can be followed to obtain the outputs mentioned. However, the order could be altered. For a point-cloud can be initially cleaned, exported, and imported again before developing the subsequent example, a point-cloud can be initially cleaned, exported, and imported again before developing the step, so as to adopt it as the basis for any other operation instead of the raw point-cloud. This sequence subsequent step, so as to adopt it as the basis for any other operation instead of the raw point-cloud. can avoid further filtering, but requires special care, as this simplification could imply erasing any This sequence can avoid further filtering, but requires special care, as this simplification could imply standardized or geometrical reference by mistake, compromising the stages of alignment/registering erasing any standardized or geometrical reference by mistake, compromising the stages of and geo-reference. Di erent software programs can be introduced as tools for the development of alignment/registering and geo-reference. Different software programs can be introduced as tools for this management process, and this is the main reason why the observance of an adequate migration in the development of this management process, and this is the main reason why the observance of an terms of compatibility of file formats is required. adequate migration in terms of compatibility of file formats is required. Scheme 1. Workflow proposal for data management according to the desired outputs and functions. Scheme 1. Workflow proposal for data management according to the desired outputs and functions. 3. Results 3.1. Ceuta and the Caliphal Gate Ceuta (Figure 2) is a Spanish autonomous city on the Northern Coast of Africa, neighboring with Morocco. It is 14 miles away from Cádiz and, according to the Spanish National Institute of Statistics, Appl. Sci. 2020, 10, 5377 8 of 21 3. Results Appl. Sci. 2020, 10, x FOR PEER REVIEW 8 of 21 3.1. Ceuta and the Caliphal Gate Ceuta (Figure 2) is a Spanish autonomous city on the Northern Coast of Africa, neighboring 2 with its population was 84,913 inhabitants in January, 2018 [42]. Its extension is 18.5 km . The first Morocco. It is 14 miles away from Cádiz and, according to the Spanish National Institute of Statistics, evidences of human occupation in the area have an age of about 270,000 years, although the current its population was 84,913 inhabitants in January, 2018 [42]. Its extension is 18.5 km . The first evidences urban core has been inhabited for 2700 years [43]. Given its strategic position on the southern side of of human occupation in the area have an age of about 270,000 years, although the current urban core the Strait of Gibraltar, it is possible to trace several historical periods of colonization or domain: has been inhabited for 2700 years [43]. Given its strategic position on the southern side of the Strait Phoenicians, Mauritanians, Romans, Byzantines, Muslims, Portugal, the Iberian Union, and finally, of Gibraltar, it is possible to trace several historical periods of colonization or domain: Phoenicians, Spain. Mauritanians, Romans, Byzantines, Muslims, Portugal, the Iberian Union, and finally, Spain. (a) (b) Figure 2. (a) Location of Ceuta. (b) General sight of the city and the royal walls. Figure 2. (a) Location of Ceuta. (b) General sight of the city and the royal walls. The necessities of defense related to its location implied the construction of walls around the city. The necessities of defense related to its location implied the construction of walls around the The Caliphal Gate (Figure 3) is a reminiscence of the medieval defensive wall that was hidden by city. The Caliphal Gate (Figure 3) is a reminiscence of the medieval defensive wall that was hidden the subsequent works that configured the royal walls of Ceuta (Figure 2b), which were declared an by thasset e subse of cultural quent work interest s that as historical configure ensemble d the ro in yal 1985. walls of Ceuta (Figure 2b), which were declared an asset of cultural interest as historical ensemble in 1985. Appl. Sci. 2020, 10, 5377 9 of 21 Appl. Sci. 2020, 10, x FOR PEER REVIEW 9 of 21 (a) (b) (c) Figure 3. (a) Access to the archaeological site from the bailey. (b) Caliphal Gate and Wall after the Figure 3. (a) Access to the archaeological site from the bailey. (b) Caliphal Gate and Wall after the works works of enhancement. (c) Detail of the Caliphal Gate. of enhancement. (c) Detail of the Caliphal Gate. It is thought that Romans built the first closures, but no remains of walls have been found to It is thought that Romans built the first closures, but no remains of walls have been found to confirm it. The construction of the medieval wall that surrounded the Islamic medina (with the main confirm it. The construction of the medieval wall that surrounded the Islamic medina (with the main religious and politic buildings, wealthy residences, and other facilities, such as baths) was started by religious and politic buildings, wealthy residences, and other facilities, such as baths) was started Abd al Rahman III and finished by his son, al Hakam, in 962 [44]. Although the basic layout of this by Abd al Rahman III and finished by his son, al Hakam, in 962 [44]. Although the basic layout of defensive structure was maintained until 1541, it suffered severe damages through the Portuguese this defensive structure was maintained until 1541, it su ered severe damages through the Portuguese siege (1415). Those circumstances made it necessary to accomplish great works to guarantee the siege (1415). Those circumstances made it necessary to accomplish great works to guarantee the security security of the site. of the site. On June 28 2002, the Caliphal Gate and part of the medieval barrier were discovered during a On June 28 2002, the Caliphal Gate and part of the medieval barrier were discovered during a visit inside the part of the royal walls that communicates with the National Tourism Parador “La visit inside the part of the royal walls that communicates with the National Tourism Parador “La Muralla”, which was inaugurated in 1967. In fact, the archaeological site itself, with a total surface of Muralla”, which was inaugurated in 1967. In fact, the archaeological site itself, with a total surface about 60 m , was used as a cellar of the hotel. This visit was one of the activities of a congress about of about 60 m , was used as a cellar of the hotel. This visit was one of the activities of a congress fortifications [45]. Until that date, it was commonly thought that the construction of the scarp of the about fortifications [45]. Until that date, it was commonly thought that the construction of the scarp of royal moat (1541–1549), which belongs to the structures known as the Portuguese ramparts [46], had the royal moat (1541–1549), which belongs to the structures known as the Portuguese ramparts [46], removed any remain of the Caliphal Wall. This discovery demonstrated that part of it was applied as had removed any remain of the Caliphal Wall. This discovery demonstrated that part of it was a reinforcement to construct the subsequent ramparts. In fact, it was comprised between the scarp applied as a reinforcement to construct the subsequent ramparts. In fact, it was comprised between and the inner vaults that were built in 1724 [47] under the Spanish domain. The Caliphal Gate and the scarp and the inner vaults that were built in 1724 [47] under the Spanish domain. The Caliphal Wall are not the only interesting elements in the site from a historical point of view: Between 2003 Gate and Wall are not the only interesting elements in the site from a historical point of view: Between and 2009, five campaigns of excavations found Roman remains from the I to the III century A.D., such 2003 and 2009, five campaigns of excavations found Roman remains from the I to the III century A.D., as an impermeabilized circular structure which was connected to a sewage, a pit excavated in gneiss, such as an impermeabilized circular structure which was connected to a sewage, a pit excavated in or pottery [48]. Slags that were used to level the floor during the period of use and construction of gneiss, or pottery [48]. Slags that were used to level the floor during the period of use and construction the Renaissance structures were also found. of the Renaissance structures were also found. Appl. Sci. 2020, 10, 5377 10 of 21 Appl. Sci. 2020, 10, x FOR PEER REVIEW 10 of 21 3.2. Main Areas of Work 3.2. Main Areas of Work The 3D model was developed according to three main units. The first one was the Royal Walls The 3D model was developed according to three main units. The first one was the Royal Walls unit (Figure 4a), which was observed by describing an itinerary that started on the bailey, descended to unit (Figure 4a), which was observed by describing an itinerary that started on the bailey, descended the archaeological complex of Caliphal Gate (Figure 4b), and finally reached the outside of the National to the archaeological complex of Caliphal Gate (Figure 4b), and finally reached the outside of the Parador by passing through it. The units two and three were located in the Caves of “El Moro” and “El National Parador by passing through it. The units two and three were located in the Caves of “El Candelero” (Figure 4c). These two vaults are enclosed within the Royal Walls, and were represented in Moro” and “El Candelero” (Figure 4c). These two vaults are enclosed within the Royal Walls, and two independent models, which were referred to according to local coordinates. were represented in two independent models, which were referred to according to local coordinates. (a) (b) (c) Figure 4. Images obtained from point-clouds. (a) Royal walls. (b) Detail of the inner distribution of Figure 4. Images obtained from point-clouds. (a) Royal walls. (b) Detail of the inner distribution of the site. (c) Cave “El Candelero”. the site. (c) Cave “El Candelero”. 3.3. Results of the Previous Works: Micro-Geodetic Network After defining the main areas of work, six vertices were located on the bailey (101 to 106), two support points were set on the National Parador (343, 341), two other vertices on the surveillance path of the counterscarp (601, 603), and a last vertex on the Weapon Square (602). Figure 5 shows their location, and Table 1 lists their coordinates. Appl. Sci. 2020, 10, 5377 11 of 21 3.3. Results of the Previous Works: Micro-Geodetic Network After defining the main areas of work, six vertices were located on the bailey (101 to 106), two support points were set on the National Parador (343, 341), two other vertices on the surveillance path of the counterscarp (601, 603), and a last vertex on the Weapon Square (602). Figure 5 shows their location, and Table 1 lists their coordinates. Appl. Sci. 2020, 10, x FOR PEER REVIEW 11 of 21 Figure 5. Micro-geodetic network and support points. Figure 5. Micro-geodetic network and support points. Table 1. Coordinates of the micro-geodetic network vertices and the support points. Table 1. Coordinates of the micro-geodetic network vertices and the support points. Name X Y z Comments Name X Y z Comments 101 290,757.78 3,974,068.26 21.46 Vertex 101 290,757.78 3,974,068.26 21.46 Vertex 102 290,760.11 3,974,058.87 21.74 Vertex 102 290,760.11 3,974,058.87 21.74 Vertex 103 290,762.17 3,974,048.03 22.07 Vertex 104 290,764.04 3,974,034.92 22.53 Vertex 103 290,762.17 3,974,048.03 22.07 Vertex 105 290,763.48 3,974,020.65 23.09 Vertex 104 290,764.04 3,974,034.92 22.53 Vertex 106 290,756.43 3,974,017.03 23.35 Vertex 105 290,763.48 3,974,020.65 23.09 Vertex 341 290,789.26 3,974,024.05 12.28 Support point 343 290,776.47 3,974,031.61 12.50 Support point 106 290,756.43 3,974,017.03 23.35 Vertex 601 290,704.39 3,974,111.90 9.51 Support point 341 290,789.26 3,974,024.05 12.28 Support point 602 290,662.62 3,974,094.87 7.94 Support point 343 290,776.47 3,974,031.61 12.50 Support point 603 290,712.23 3,974,059.13 11.39 Support point 601 290,704.39 3,974,111.90 9.51 Support point 602 290,662.62 3,974,094.87 7.94 Support point The accuracy of the network had to be enough to guarantee the coherence with the subsequent 603 290,712.23 3,974,059.13 11.39 Support point representation of the 3D model, considering a scale of 1:500. The vertices of the micro-geodetic network and the support points were referred to with respect to the permanent station in Ceuta Heliport, The accuracy of the network had to be enough to guarantee the coherence with the subsequent which belongs to the National Network of Reference Stations (ERGNSS) and the European Network of representatio Permanent n of the Stations3D (EUREF model, con , EPN). Ts wo idering GPS devices a scale of were1:500. T used to observe he vertices o in RTKf the micro mode, recor-di ge ng odetic the coordinates of each basis four times. Final coordinates were obtained by calculating the average network and the support points were referred to with respect to the permanent station in Ceuta of the observed values, as long as the di erence between them was lesser than 3.5 cm. This value Heliport, which belongs to the National Network of Reference Stations (ERGNSS) and the European can be assumed as the accuracy provided for the absolute coordinates of the point-clouds that were Network of Permanent Stations (EUREF, EPN). Two GPS devices were used to observe in RTK mode, produced, and it is sucient for most works in the fields of topography and cartography. However, recording the coordinates of each basis four times. Final coordinates were obtained by calculating the 4 mm can be o ered as the accuracy provided by TLS for simple measurements when working in average of the observed values, as long as the difference between them was lesser than 3.5 cm. This relative coordinates. value can be assumed as the accuracy provided for the absolute coordinates of the point-clouds that were produced, and it is sufficient for most works in the fields of topography and cartography. However, 4 mm can be offered as the accuracy provided by TLS for simple measurements when working in relative coordinates. 3.4. Point-Clouds For this work, 23 scans were acquired, with 427 million points and a total size of 23.5 GB. Had the complete set of scans been taken, it would have been necessary to register them as a single point- cloud. As mentioned in Section 2.2.3., the whole set can be referred to according to one of the point- clouds, or geo-referred with respect to an absolute system. In order to develop this procedure, it was necessary to apply a software tool that allowed the algorithm for this transformation to be defined. In this case, as it has been previously mentioned, ETRS89 was adopted as the universal system of reference. Leica Cyclone was applied for the transformation of coordinates. This specialized software offers great advantages when working with Appl. Sci. 2020, 10, 5377 12 of 21 3.4. Point-Clouds For this work, 23 scans were acquired, with 427 million points and a total size of 23.5 GB. Had the complete set of scans been taken, it would have been necessary to register them as a single point-cloud. As mentioned in Section 2.2.3., the whole set can be referred to according to one of the point-clouds, or geo-referred with respect to an absolute system. In order to develop this procedure, it was necessary to apply a software tool that allowed the algorithm for this transformation to be defined. In this case, as it has been previously mentioned, ETRS89 was adopted as the universal system of reference. Leica Cyclone was applied for the transformation of coordinates. This specialized software offers great advantages when working with point-clouds obtained by using devices from the same manufacturer, although it allows for files acquired with TLSs developed by other companies to be imported. After choosing the tool for the primary management of the point-clouds, the micro-geodetic network of vertices and the support points had to be considered in order to determine the correspondences between the registered references within the point-clouds, and their homologues in reality. Hence, it was possible to set the conditions that were needed for the aimed transformations. The registering process is characterized by the generation of data bases to allocate the model spaces that are generated from a single scan, or by the junction of two or more. This is a process that requires the development of intermediate nested workspaces to integrate the di erent scans that were acquired during the fieldwork. As final steps, the georeferencing, cleaning, and depuration of the previously registered point-clouds can be mentioned. This process generates projects that increase the already intensive requirements of available memory to storage them. It is worth mentioning that, after importing the files, developing the first tempting registers, and developing the final georeferenced joins previous to exportation, the absolute size of the data base associated to the project was 90.1 GB. 3.5. Meshes Given the great amount of data associated to the point-clouds, the initial step that was followed to obtain the triangulated 3D model implied the analysis of the main available alternatives. Reconstructor and Geomagic Rapidform were considered as the most suitable tools for this work. Most of the management was developed with the latter, while the first one was applied to achieve an intelligent partition of the general model, so as to obtain uniform sections in terms of size, and to optimize the management of data. After the initial importation and adequation of files with Reconstructor, a step of filtering was followed to enhance the definition of the elements, and the point-clouds were meshed, reducing the empty areas that were not accessible for the TLS to scan, due to the geometry of the spaces and its relative location with respect to the device. Afterwards, the individual sections were joined as a single entity. The final step implied the exportation of the digital model to a compatible *.ply file. An e ective routine for the treatment of point-clouds and meshes had to observe the kind of intermediate files that it generated, since problems of compatibility are common even with file formats that should be accepted without problems by post-processing programs, as declared in their specification sheets. Considering the first and main unit of this work, which includes the Caliphal Gate, the mesh was divided into 13 archives to ease its management, with a total size of 3.01 GB. Another lighter version was exported, with a size of 494 MB. The treatment of the files belonging to the Caves (“El Moro” and “El Candelero”) followed the same steps, but they were exported as auto-executable files. 3.6. Other Outputs of Interest Treated point-clouds and meshes are the basis for the development of a set of outputs that imply important benefits for the management and broadcast of the cultural asset that is modeled. In this case, orthoimages, virtual itineraries, and an interactive application were the main products. Appl. Sci. 2020, 10, 5377 13 of 21 3.6.1. Orthoimages Eight orthoimages were obtained from the unified point-cloud (Figure 6), and the other five from the meshed model (Figure 7a). These images show elements of special interest within the archaeological site, such as the Caliphal Gate or the original patterned medieval paintings on one of its side walls (Figure 7b). The tools that were applied to generate these orthoimages di ered when working with point-clouds or meshes, although the process was the same in both cases. In this work, orthoimages from point-clouds were obtained with Leica Cyclone, and Geomagic Rapidform was applied for those that were generated from meshes. Appl. Sci. 2020, 10, x FOR PEER REVIEW 13 of 21 Figure 6. Orthoimage obtained from the point-cloud. Figure 6. Orthoimage obtained from the point-cloud. Considering the process of obtention, the first step implied selecting the area of interest. After that, a reference plane was defined. This plane had to be significant for the element that is needed to represent. Orthographic projection was selected to obtain the image: Given the fact that the projective rays are parallel in this perspective, any distortion associated with the viewer’s position or that of the element was avoided. A virtual camera had to be perpendicularly placed with respect to the reference plane (and therefore, to the element itself). After following these steps, the elements that were included within the screen should be exported to a suitable format. Appl. Sci. 2020, 10, 5377 14 of 21 Appl. Sci. 2020, 10, x FOR PEER REVIEW 14 of 21 (a) (b) Figure 7. Orthoimages obtained from the meshed model. (a) Frontal view of the gate. (b) Adjacent Figure 7. Orthoimages obtained from the meshed model. (a) Frontal view of the gate. (b) Adjacent wall with remains of medieval patterned paintings. wall with remains of medieval patterned paintings. Considering the process of obtention, the first step implied selecting the area of interest. After that, 3.6.2. Virtual Itineraries a reference plane was defined. This plane had to be significant for the element that is needed to Software tools applied for the management and meshing of the point-clouds allow the represent. Orthographic projection was selected to obtain the image: Given the fact that the projective possibility to set itineraries to be followed by a virtual viewer of a certain height. The process that is rays are parallel in this perspective, any distortion associated with the viewer ’s position or that needed to follow in order to define these itineraries implies locating a series of individual virtual of the element was avoided. A virtual camera had to be perpendicularly placed with respect to cameras, which will act as nodes or sights comprised by the itinerary. It is worth noting that the the reference plane (and therefore, to the element itself). After following these steps, the elements that height is not needed to be a constant. This contributes to varying the experience associated with the were included within the screen should be exported to a suitable format. visualization of the video, which is the final format of the itinerary. Hence, it is possible to emulate 3.6.2. Virtual Itineraries the point of view of a potential visitor to the archaeological site or, for example, to get the perspective of a drone that flew through the asset. Software tools applied for the management and meshing of the point-clouds allow the possibility After defining the different locations for the virtual camera, it is necessary to generate a spline to set itineraries to be followed by a virtual viewer of a certain height. The process that is needed to curve that contains them (Figure 8a). This curve is representative of the viewer’s displacement follow in order to define these itineraries implies locating a series of individual virtual cameras, which through the model, and it conditions the final result. The definition of the curve must be accurate will act as nodes or sights comprised by the itinerary. It is worth noting that the height is not needed to enough to guarantee an adequate feeling of realism: Effects such as penetration through walls should be a constant. This contributes to varying the experience associated with the visualization of the video, be avoided to increase it. An adequate definition of the itinerary can simulate the rotation of the which is the final format of the itinerary. Hence, it is possible to emulate the point of view of a potential whole model or of certain parts of special interest, thus providing important and non-exclusively visitor to the archaeological site or, for example, to get the perspective of a drone that flew through geometric information in a fast and intuitive way. the asset. Had the itinerary been defined, it would have been necessary to define aspects such as the speed After defining the di erent locations for the virtual camera, it is necessary to generate a spline of the displacement, or other desired features of the exported video (such as the grade of compression curve that contains them (Figure 8a). This curve is representative of the viewer ’s displacement through or the dimensions or format of the screen). the model, and it conditions the final result. The definition of the curve must be accurate enough to Considering this work, eight different videos were developed, six of them from the basis of the guarantee an adequate feeling of realism: E ects such as penetration through walls should be avoided point-clouds (Figure 8b), and two more from the meshes. The process to generate the latter two was to increase it. An adequate definition of the itinerary can simulate the rotation of the whole model or of the same as the one described for point-clouds. These videos had durations from 1:00 to 1:30 min, certain parts of special interest, thus providing important and non-exclusively geometric information and sizes between 788 MB and 2.37 GB. In addition to them, another itinerary was developed from in a fast and intuitive way. the meshed model, with a length of 4:20 and a size of 1.84 GB (Figure 8). The main aim of these videos was the dissemination of the site, and the documentation of the state of the works of enhancement in an intermediate stage. Two main types of videos were generated. The first one was based in the generation of rotations. Hence, three different files were generated. The first one implied the rotation of the whole point-clouds set, including those taken outside the complex. The second video included the indoor complex and part of the royal walls. It was particularly appreciated by the archaeologist, as it provided an idea of the location and distribution of the asset within the walls. The third one, Appl. Sci. 2020, 10, x FOR PEER REVIEW 15 of 21 which can be found online [49], comprised the rotation of the gate itself. The rest of the videos were designed as itineraries through the site. The liberty that this alternative offered when setting the paths to be followed by the cameras allowed routes that are not limited to those that would be followed by a visitor to be established, as it was possible to adopt more creative options, including flights. In this case, the two options were explored: The most realistic one considered the simulation of a visitor’s walkthroughs (e.g., starting from the allure, going down through the site, and reaching the outside Appl. Sci. 2020, 10, 5377 15 of 21 by crossing the National Parador), while the second alternative implied the introduction of flights (crossing the channel and getting into the site through a window, or within the inner complex). (a) (b) (c) Figure 8. Virtual itineraries. (a) Virtual cameras and spline that generate the walkthrough. (b) Frame Figure 8. Virtual itineraries. (a) Virtual cameras and spline that generate the walkthrough. (b) Frame of the output obtained from point-cloud. (c) Frame of the video generated from the mesh. of the output obtained from point-cloud. (c) Frame of the video generated from the mesh. Had the itinerary been defined, it would have been necessary to define aspects such as the speed 3.6.3. Interactive Application of the displacement, or other desired features of the exported video (such as the grade of compression or the dimensions or format of the screen). One of the most interesting outputs obtained from the 3D model was the interactive application Considering this work, eight di erent videos were developed, six of them from the basis of (Figure 9), which can be considered as the natural next step to be taken in order to enhance the user’s the point-clouds (Figure 8b), and two more from the meshes. The process to generate the latter experience, as the possibility to decide the way to be followed through the 3D scenery is enabled. two was the same as the one described for point-clouds. These videos had durations from 1:00 to 1:30 min, and sizes between 788 MB and 2.37 GB. In addition to them, another itinerary was developed Appl. Sci. 2020, 10, 5377 16 of 21 from the meshed model, with a length of 4:20 and a size of 1.84 GB (Figure 8). The main aim of these videos was the dissemination of the site, and the documentation of the state of the works of enhancement in an intermediate stage. Two main types of videos were generated. The first one was based in the generation of rotations. Hence, three di erent files were generated. The first one implied the rotation of the whole point-clouds set, including those taken outside the complex. The second video included the indoor complex and part of the royal walls. It was particularly appreciated by the archaeologist, as it provided an idea of the location and distribution of the asset within the walls. The third one, which can be found online [49], comprised the rotation of the gate itself. The rest of the videos were designed as itineraries through the site. The liberty that this alternative o ered when setting the paths to be followed by the cameras allowed routes that are not limited to those that would be followed by a visitor to be established, as it was possible to adopt more creative options, including flights. In this case, the two options were explored: The most realistic one considered the simulation of a visitor ’s walkthroughs (e.g., starting from the allure, going down through the site, and reaching the outside by crossing the National Parador), while the second alternative implied the introduction of flights (crossing the channel and getting into the site through a window, or within the inner complex). 3.6.3. Interactive Application One of the most interesting outputs obtained from the 3D model was the interactive application (Figure 9), which can be considered as the natural next step to be taken in order to enhance the user ’s experience, as the possibility to decide the way to be followed through the 3D scenery is enabled. Appl. Sci. 2020, 10, x FOR PEER REVIEW 16 of 21 Figure 9. Interactive application. Figure 9. Interactive application. The main aim of this output was the dissemination of the asset with a tool that provides a higher The main aim of this output was the dissemination of the asset with a tool that provides a higher grade of freedom to move through the site. These products can be adapted for di erent purposes, grade of freedom to move through the site. These products can be adapted for different purposes, such as their presentation in tourism exhibitions, their online di usion as browser applications, or their such as their presentation in tourism exhibitions, their online diffusion as browser applications, or implementation in specially enabled rooms in visitor, museums, or interpretation centers. The sizes their implementation in specially enabled rooms in visitor, museums, or interpretation centers. The of the files applied to obtain the interactive application were optimized without compromising sizes of the files applied to obtain the interactive application were optimized without compromising the chromatic information. In order to achieve this reduction, the following steps were taken. the chromatic information. In order to achieve this reduction, the following steps were taken. The The chromatic information was translated into a texture map, so as to increase the quality of chromatic information was translated into a texture map, so as to increase the quality of the the information obtained from the pictures provided by the TLS camera, and the texture quality information obtained from the pictures provided by the TLS camera, and the texture quality was was enhanced by modifying the RGB levels, the contrast, brightness, etc.). The polygonal mesh was enhanced by modifying the RGB levels, the contrast, brightness, etc.). The polygonal mesh was optimized by a procedure of smart-decimation: The original density of polygons was maintained in optimized curved by and a complex procedur are eas, of smart while it -deci wasmation: reduced T in he plane origi surfaces. nal densAfter ity ofthat, polygon the textur s was e maps mainta wer ined e in curved and complex areas, while it was reduced in plane surfaces. After that, the texture maps were applied onto the optimized meshes. When this treatment of reduction and optimization was finished, the meshes were pre-processed with the software Blender. Several adjustments of scale, position, and orientation were done, and the texture and UV maps were verified. Minor defects of the mesh, such as gaps in the mesh due to the absence of points, were filled. The next step implied the use of the software Unity 3D to place the meshes in the scenery, to configure and assign materials and lighting, and to determine the itinerary and interaction with the user. Although according to the requirements of the project in this particular case they were not required, additional elements such as texts, images, or other information could be added. After concluding the ambiance, the stage of publishing started. The web player project (159 MB) and the *.exe file (551 MB) were compiled, along with the final tests, before closing the project. 4. Discussion Three-dimensional models obtained by means of TLS, on which technicians can rely to establish plans for conservation and exploitation of archaeological heritage, are characterized by rigorous metrics. They must be supported by point-clouds made with sufficient quality from both the instrumental and methodological point of view. In this sense, the previous works carried out to provide a single system of reference, the design of a good observation (especially in the case of confined spaces), the selection of an optimal resolution, and an adequate methodology for the alignment/registration are fundamental to guarantee that the propagation of the error is as small as possible, and to maximize the representativeness of the model, as it has been justified in previous sections. Given the size of the point-clouds, it is necessary to decide among several options of hardware and software for their management. This research provided a workflow for the management and generation of the outputs and suggested some suitable programs, although they are not the only available options. In this sense, Leica Cyclone, Reconstructor, Geomagic Rapidform, and Blender Appl. Sci. 2020, 10, 5377 17 of 21 applied onto the optimized meshes. When this treatment of reduction and optimization was finished, the meshes were pre-processed with the software Blender. Several adjustments of scale, position, and orientation were done, and the texture and UV maps were verified. Minor defects of the mesh, such as gaps in the mesh due to the absence of points, were filled. The next step implied the use of the software Unity 3D to place the meshes in the scenery, to configure and assign materials and lighting, and to determine the itinerary and interaction with the user. Although according to the requirements of the project in this particular case they were not required, additional elements such as texts, images, or other information could be added. After concluding the ambiance, the stage of publishing started. The web player project (159 MB) and the *.exe file (551 MB) were compiled, along with the final tests, before closing the project. 4. Discussion Three-dimensional models obtained by means of TLS, on which technicians can rely to establish plans for conservation and exploitation of archaeological heritage, are characterized by rigorous metrics. They must be supported by point-clouds made with sucient quality from both the instrumental and methodological point of view. In this sense, the previous works carried out to provide a single system of reference, the design of a good observation (especially in the case of confined spaces), the selection of an optimal resolution, and an adequate methodology for the alignment/registration are fundamental to guarantee that the propagation of the error is as small as possible, and to maximize the representativeness of the model, as it has been justified in previous sections. Given the size of the point-clouds, it is necessary to decide among several options of hardware and software for their management. This research provided a workflow for the management and generation of the outputs and suggested some suitable programs, although they are not the only available options. In this sense, Leica Cyclone, Reconstructor, Geomagic Rapidform, and Blender were applied for the processing of point-clouds and generation of meshes. Considering a practical application of the obtained outputs by the final user, it is worth discussing the possibilities associated with open-source alternatives to view, manage, and share them, as they are a ordable options that can avoid the necessity to adopt other specific tools. Alternatives such as CloudCompare or MeshLab are interesting freeware options to process point-clouds and meshes, respectively. The first one is particularly useful for the visualization of point-clouds, and it allows distances or angles to be measured. The second option is a valuable open-source option of the management of meshes, as it o ers several algorithms for their treatment, which can be more or less adequate, according to the characteristics of the model. However, MeshLab shows a higher limitation in terms of the maximum number of points that can be managed with respect to CloudCompare. The diculty to work with absolute coordinates is an important inconvenience to take into account in both cases, although this problem is not exclusive for open-source software. It is related to the use of 32-bit floating variables [19], which is today common for many management and meshing programs, and also for current graphic cards. However, CloudCompare counts with an e ective system to translate coordinates, which permits limiting the amount of significative numbers to consider when working with point-clouds. These options o er other practical advantages for the final user, such as the possibility to calculate volumes, or the di erent algorithms that they o er for the generation of surfaces. The previously described software allows models, orthoimages, and virtual itineraries to be generated from the point-clouds, but the adoption of the meshes for their development provides more tangibility and a higher degree of immersion in the element or environment represented, with the obtention of photorealistic models that maintain the metric fidelity. In this sense, these results can be useful for all the stages of conservation and enhancement of the heritage assets, given the fact that the geometric information is suitable for the development of any project of enhancement, or for the development of any constructive solution for the enablement of access, that is compatible with the integrity of the site or element. Another way to use this type of products is their application for marketing and dissemination initiatives, since a virtualization of the site implies a first approach Appl. Sci. 2020, 10, 5377 18 of 21 to potential visitors. Virtual tours and itineraries can be designed and aimed at di erent platforms and social targets, and therefore their level of interactivity can vary, depending on the final product, either video, interactive PDF, or interactive application. All these options provide a way for improving communication between the promoting organism and society, constituting interaction channels that were unimaginable a relatively short time ago, such as social networks, through multimedia products that allow for the enrichment and dynamization of their profiles. Considering the practical case of this research, a methodology of observation was developed to guarantee an optimal 3D model from the point of view of quality, which was focused more on the metric approach than on the chromatic aspects. A workflow was implemented to process the data obtained as a result of the designed methodology. Finally, we completed an analysis of products and sub-products that could be generated from the point-clouds and meshes, along with their potential application in the field of conservation, enhancement, and dissemination of archaeological heritage. The discussion of the aspects that could be improved in this research should focus on the degree of definition of the point-clouds, which was not uniform and was strongly conditioned by the relative location of the available points for the observations, and the archaeological complex itself. In addition to this, given the necessities of the operating organism, metrics were emphasized over chromatic aspects. Due to this, no complementary cameras to the one of the TLS were applied. The use of such devices would have improved the quality of textures, and therefore the realism of the model. Despite this and the variation of lighting conditions through the observation, the quality of the outputs that were obtained for conservation and the potential dissemination of the heritage asset were considered as sucient. 5. Conclusions Virtual models provide a better comprehension of actual objects, and they imply an interesting option for the solution of problems in many scientific disciplines, such as archaeology. However, TLS surveying procedures and the subsequent data management require workflows that are not formally established today. This research was focused on establishing a proposal for these workflows. A methodological strategy for data capture when working in archaeological sites, which are commonly characterized by being dicult to observe, has been set. This allows for registering data with sucient quality. A collection of di erent software programs, for both managing point-clouds and generating outputs, has been presented. The possibilities for the application of open-source programs by the final user have been emphasized, as the availability of this type of tools eases the access to the information. The results that were generated have been the basis for the analysis of potential outputs that can be suitable for conservation, enhancement, and dissemination of the assets. The works that have been developed in this research are aimed at setting the previously mentioned workflow for the generation of a 3D model of an archaeological site (the Caliphal Gate and its immediate surroundings), which allows the historiographic analysis of the complex to continue. This progress permits simulating and assessing any intervention, and provides a series of di erent sub-products for the broadcast of the site, as has been described. Author Contributions: Conceptualization, J.M.d.L.-R., R.P.-G., and R.P.-Á.; formal analysis, R.P.-Á., J.M.d.L.-R., and R.P.-G.; investigation, R.P.-Á. and J.M.d.L.-R.; methodology, J.M.d.L.-R., R.P.-G., and R.P.-Á.; fieldwork, J.M.d.L.-R., R.P.-G., and R.P.-Á.; data management, R.P.-Á. and R.P.-G.; supervision, J.M.d.L.-R. and G.F.-M.; writing—original draft, R.P.-Á., G.F.-M., and B.M.-P.; writing—review and editing, R.P.-Á., J.M.d.L.-R., R.P.-G., G.F.-M., and B.M.-P. All authors have read and agreed to the published version of the manuscript. Funding: This research was funded by the enterprise CONSTRUCCIONES JOMASA S.L., which was in charge of the project of enhancement of the Royal Walls. Acknowledgments: The authors want to express their gratitude to the enterprise to the government of the Autonomous City of Ceuta, to CONSTRUCCIONES JOMASA S.L., and to Fernando Villada, archaeologist in the Autonomous City of Ceuta and member of Instituto de Estudios Ceutíes. Appl. Sci. 2020, 10, 5377 19 of 21 Conflicts of Interest: The authors declare no conflict of interest. References 1. Ferrer Torío, R.; Ruiz Bedia, M.L. Fotogrametría aplicada al patrimonio. In El Patrimonio Histórico 10, Actas de los XVI Cursos Monográficos sobre Patrimonio Histórico; Iglesias Gil, J.M., Ed.; Servicio de Publicaciones de la Universidad de Cantabria: Santander, Spain, 2005; pp. 109–120. 2. Piña Patón, B.; Mañero García, A.; Pascual Sanz, F. Trabajos Topográficos y Altimétricos en la Cueva de Altamira. Rev. Fund. Patrim. Hist. Castilla León 2002, 8, 31–32. 3. Penasa, L.; Franceschi, M.; Petro, N.; Teza, G.; Polito, V. Integration of intensity textures and local geometry descriptors from terrestrial laser scanning to map chert in outcrops. ISPRS-J. Photogramm. Remote Sens. 2014, 93, 88–97. [CrossRef] 4. Rodríguez-Gonzálvez, P.; Mancera-Taboada, J.; González-Aguilera, D.; Muñoz-Nieto, A.; Armesto, J.A. A hybrid approach to create an archaeological visualization system for a paleolithic cave. Archaeometry 2011, 54, 565–580. [CrossRef] 5. Santana, D.; Corominas, J.; Mavrouli, O.; García Sellés, D. Magnitude-frequency relation for rockfall scars using a Terrestrial Laser Scanner. Eng. Geol. 2012, 145, 50–64. [CrossRef] 6. Hancock, G.R.; Crawter, D.; Fityius, S.G.; Chandler, J.; Wells, T. The measurement and modelling of rill erosions at angle of repose slopes in mine spoil. Earth Surf. Proc. Landforms 2008, 33, 1006–1020. [CrossRef] 7. Tarolli, P.; Calligaro, S.; Cazorzi, F.; Dalla Fontana, G. Recognition of surface flow processes influenced by roads and trails in mountain areas using high-resolution topography. Eur. J. Remote Sens. 2014, 46, 176–197. [CrossRef] 8. Kajzar, V.; Kukutsch, R.; Waclawik, P.; Konicek, P. Coal pillar deformation monitoring using terrestrial laser scanner technology in room and pillar panel—A case study from the Ostrava-Karvina coal field. In Rock Mechanics and Rock Engineering: From the Past to the Future, Proceedings of the 2016 ISRM International Symposium—Eurock 2016, Cappacocia, Turkey, 29–31 August 2016; Ulusay, R., Aydan, Ö., Gerçek, H., Ali Hindistan, M., Eds.; CRC Press: Leiden, The Netherlands, 2016; Volume 2, pp. 951–956. 9. Brodie, K.L.; Slocum, R.K.; McNinch, J.E. New insights into the physical drivers of wave runup from a continuously operating terrestrial laser scanner. In Proceedings of the MTS/IEEE Oceans, Hampton Roads, VA, USA, 14–19 October 2012. 10. Barbarella, M.; Fiani, M. Monitoring of large landslides by Terrestrial Laser Scanning techniques: Field data collection and processing. Eur. J. Remote Sens. 2013, 46, 126–151. [CrossRef] 11. Bonali, E.; Pesci, A.; Casula, G.; Boschi, E. Deformation of ancient buildings inferred by terrestrial laser scanning methodology: The Cantalovo Church case study (Northern Italy). Archaeometry 2013, 56, 703–716. [CrossRef] 12. Sampson, C.C.; Fewtrell, T.J.; Ducan, A.; Shaad, K.; Horritt, M.S.; Bates, P.D. Use of terrestrial laser scanning data to drive decimetric resolution urban inundation models. Adv. Water Resour. 2012, 41, 1–17. [CrossRef] 13. Golpavar-Fard, M.; Bohn, J.; Teizer, J.; Savarese, S.; Peña-Mora, F. Evaluation of image-based modelling and laser scanning accuracy for emerging automated performance monitoring techniques. Autom. Constr. 2012, 20, 1143–1155. [CrossRef] 14. Azmy, S.N.; Sah, S.A.; Shafie, N.J.; Grin, A.; Majid, Z.; Ismail, M.N.; Shamsir, M.S. Counting in the dark: Non-intrusive laser scanning for population counting and identifying of roosting bat. Sci. Rep. 2012, 2, 1–4. [CrossRef] [PubMed] 15. Pueschel, P. The influence of scanner parameters on the extraction of tree metrics from FARO Photon 120 laser scans. ISPRS-J. Photogramm. Remote Sens. 2013, 78, 58–68. [CrossRef] 16. Odipo, V.O.; Nickless, A.; Berger, C.; Baade, J.; Urbazaev, M.; Walther, C.; Schmullius, C. Assessment of aboveground woody biomass dynamics using terrestrial laser scanner and L-Band Data in South African Savanna. Forests 2016, 7, 294. [CrossRef] 17. Ehlert, D.; Heisig, M. Sources of angle-dependent errors in terrestrial laser scanner-based cropped stand measurement. Comput. Electron. Agric. 2013, 93, 10–16. [CrossRef] 18. Marsico, A.; Sabato, L.; Spalluto, L.; Infante, M.; Nitti, A. Integrated geological and digital surveys to know, preserve and promote a geoheritage: The Sea Cli of Vignanotica Bay (Gargano Promontory, Southern Italy). Geoheritage 2016, 8, 371–380. [CrossRef] Appl. Sci. 2020, 10, 5377 20 of 21 19. Pérez-Álvarez, R. Aplicación de las Nuevas Tecnologías Geomáticas en El Grupo Minero La Florida. In Proceedings of the I Congreso Científico Internacional de Cuevas y Minas “El Soplao”, Celis, Spain, 15–17 November 2017; De Luis-Ruiz, J.M., Pérez-Álvarez, R., Fernández Maroto, G., El Soplao, S.L., Eds.; Consejería de Innovación, Industria, Turismo y Comercio del Gobierno de Cantabria: Santander, Spain, 2017; pp. 87–104. 20. Ghiraldi, L.; Giordano, E.; Perotti, L.; Giardino, M. Digital tools for collection, promotion and visualisation of geoscientific data: Case study of Seguret Valley (Piemonte, NW Italy). Geoheritage 2014, 6, 103–112. [CrossRef] 21. Torres, J.A.; Hernández-López, D.; González-Aguilera, D.; Moreno Hidalgo, M.A. A hybrid measurement approach for archaeological site modelling and monitoring: The Case Study of Mas D’Is, Penàguila. J. Archaeol. Sci. 2014, 50, 475–483. [CrossRef] 22. Di Salvo, F.; Lo Brutto, M. Full-waveform terrestrial laser scanning for extracting a high-resolution 3D topographic model: A case study on an area of archeological significance. Eur. J. Remote Sens. 2014, 47, 307–327. [CrossRef] 23. Fregonese, L.; Barbieri, G.; Biolzi, L.; Bocciarelli, M.; Frigeri, A.; Ta urelli, L. Surveying and monitoring for vulnerability assessment of an ancient building. Sensors 2013, 13, 9747–9773. [CrossRef] 24. Bertocci, S.; Pancani, G.; Cottinin, A. The City Wall of Lastra a Signa: Integrated Digital Survey Methodologies. In Defensive Architecture of the Mediterranean; Navarro Palazón, J., García Pulido, L.J., Eds.; Universitat Politècnica de València: Valencia, Spain, 2010; Volume X, pp. 255–262. 25. Nocerino, E.; Menna, F.; Farella, E.; Remondino, F. 3D virtualization of an underground semi-submerged cave system. Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci. 2019, XLII-2/W15, 857–864. [CrossRef] 26. Bertocci, S. Il Castello templar de Peniscola, da fortezza di época crociata a cittadella tardo rinascimentale. In Defensive Architecture of the Mediterranean, XV to XVIII Centuries; Navarro Palazón, J., Ed.; Universitat Politécnica de València: Valencia, Spain, 2015; Volume II, pp. 27–32. 27. Miceli, A.; Morandotti, M.; Parrinello, S. 3D survey and semantic analysis for the documentation of built heritage. The case study of Palazzo Centrale of Pavia University. VITRUVIO Int. J. Arch. Technol. Sustain. 2020, 5, 65–80. [CrossRef] 28. Parrinello, S.; Gómez-Blanco Pontes, A.; Picchio, F.; Rodríguez-Moreno, C.; Rivas-López, E. An integrated system for documentation, analysis and management of the architectural heritage: The general and the parts of the Generalife Palace. EGA Rev. Exp. Graf. Arquit. 2019, 35, 140–151. [CrossRef] 29. Rodríguez-Moreno, C.; Reinoso-Gordo, J.F.; Rivas-López, E.; Gómez-Blanco, A.; Ariza-López, F.J.; Ariza-López, I. From point cloud to BIM: An integrated workflow for documentation, research and modelling of architectural heritage. Surv. Rev. 2018, 50, 212–231. [CrossRef] 30. Grilli, E.; Özdemir, E.; Remondino, F. Application of machine and deep learning strategies for the classification of heritage point clouds. Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci. 2019, XLII-4/W18, 447–454. [CrossRef] 31. Grilli, E.; Remondino, F. Machine learning generalization across di erent 3D architectural heritage. GISPRS Int. J. Geo-Inf. 2020, 9, 379. [CrossRef] 32. Balzani, M.; Maietti, F.; Kühl, B. Point cloud analysis for conservation and enhancement of modernist architecture. Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci. 2017, XLII-2/W3, 71–77. [CrossRef] 33. Apollonio, F.I.; Bassilissi, V.; Callieri, M.; Dellepiano, M.; Gaiani, M.; Ponchio, F.; Rizzo, F.; Rubino, A.R.; Scopigno, R.; Sobra, G. A 3D-centered information system for the documentation of a complex restoration intervention. J. Cult. Herit. 2017, 29, 89–99. [CrossRef] 34. Parrinello, S.; Porzilli, S. 3D survey systems and digital simulations for structural monitoring of rooms at the Uzi Museum in Florence. In Mechatronics for Cultural Heritage and Civil Engineering. Intelligent Systems, Control and Automation: Science and Engineering; Ottaviano, E., Pellicio, A., Galluti, V., Eds.; Springer: Cham, Switzerland, 2018; Volume 92, pp. 203–233. 35. Parrinello, S. A development project for the United Nations. The digital survey for the planning of East Jerusalem. In Putting Tradition into Practice: Heritage, Place and Design; Amoruso, G., Ed.; Springer: Cham, Switzerland, 2018; Volume 3, pp. 551–559. 36. Bertocci, S.; Bua, S.; Parrinello, S.; Picchio, F. Montepulciano 3D virtual models for urban planning and development of the urban environment. DISEGNARECON 2014, 7, 1–20. Appl. Sci. 2020, 10, 5377 21 of 21 37. Bertocci, S.; Parrinello, S. Experiences of digital documentation of carsulae on the Flaminian Way in Umbria. SCIRES-IT-Sci. Res. Inf. Technol. 2014, 4, 5–13. 38. Litchi, D.D.; Licht, G. Experiences with terrestrial laser scanner modelling and accuracy assessment. In Proceedings of the IAPRS, Part 5, Dresden, Germany, 25–27 September 2006; Maas, H.G., Schneider, D., Eds.; ISPRS: Dresden, Germany, 2006; Volume XXXVI, pp. 155–160. 39. Reshetyuk, Y. A unified approach to self-calibration of terrestrial laser scanners. ISPRS J. Photogramm. Remote Sens. 2010, 65, 445–456. [CrossRef] 40. Gordon, S.J.; Lichti, D. Terrestrial laser scanners with a narrow field of view: The e ect on 3D resection solutions. Sur. Rev. 2004, 37, 448–468. [CrossRef] 41. Reshetyuk, Y. Investigation and Calibration of Pulsed Time-of-Flight Terrestrial Laser Scanners. Master ’s Thesis, KTH Royal Institute of Technology, Stockholm, Sweden, 2006. 42. INE. Available online: https://www.ine.es/jaxiT3/Tabla.htm?t=2853&L=0n (accessed on 22 July 2020). 43. Villada Paredes, F. Arquitectura Urbana de Ceuta (2000–2005). In Actas del I Seminario Hispano-Marroquí de Especialización en Arqueología; Bernal, D., Raissouni, B., Ramos, J., Bouzouggan, A., Eds.; Servicio de Publicaciones de la Universidad de Cádiz: Cádiz, Spain, 2012; pp. 269–280. 44. Villada Paredes, F.; Gurriarán Daza, P. Recientes investigaciones sobre las fortificaciones del Califato Omeya en el estrecho de Gibraltar (Tarifa, Algeciras, Tánger, Ceuta). In Fortificações e Território na Península Ibérica e no Magreb (Séculos VI a XVI); Ferreira Fernandes, I.C., Ed.; Edições Colibri/Campo Arqueológico de Mértola: Lisboa, Portugal, 2013; Volume I, pp. 51–62. 45. Gómez Barceló, J.L. Informe sobre el hallazgo en Ceuta de una Muralla Califal. In Anuario de la Real Academia de Bellas Artes San Telmo; Canales Pérez, A., Cuenca Mendoza, J.M., Eds.; Real Academia de Bellas Artes San Telmo: Málaga, Spain, 2002; pp. 14–17. 46. Hernández de León, J.M. Rehabilitación de las Murallas de Ceuta. Rev. Arquit. 2001, 324, 55–67. 47. Gómez Barceló, J.L. Ceuta, una ciudad fortificada. Aldaba 2008, 34, 145–166. [CrossRef] 48. Villada Paredes, F. Excavaciones arqueológicas en la Muralla Real de Ceuta: Persistencias y rupturas (1415–1668). In Velhos e Novos Mundos. Estudos de Arqueologia Moderna Old and New Worlds. Studies on Early Modern Archaeology; André Teixeira, A., José António Bettencourt, J.A., Eds.; Centro de História de Além-Mar, Faculdade de Ciências Sociais e Humanas—Universidade Nova de Lisboa, Universidade dos Açores: Lisboa, Portugal, 2012; Volume 1, pp. 375–384. 49. Modelo 3D de la Puerta Califal de Ceuta—Unican.es. Available online: https://www.youtube.com/watch?v= UCC1nkiIVig (accessed on 22 July 2020). © 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Journal

Applied Sciences – Multidisciplinary Digital Publishing Institute

Published: Aug 4, 2020

There are no references for this article.