Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Non-linear elastic analysis of delamination in two-dimensional functionally graded multilayered beams

Non-linear elastic analysis of delamination in two-dimensional functionally graded multilayered... An analytical study of delamination fracture in two-dimensional functionally graded multilayered non-linear elastic split cantilever beam configurations is carried out. The beam is made of an arbitrary number of adhesively bonded longitudinal vertical layers, which have different thicknesses and material properties. Besides, the material is two-dimensional functionally grade in the cross-section of each layer. A vertical delamination crack is located arbitrary along the beam width. The beam is loaded eccentrically in tension by a force applied at the free end of the right-hand crack arm. The delamination fracture is studied in terms of the strain energy release rate. A comparison with the J-integral approach is carried out for verification. The results, yielded by the two analyses, are identical. The solutions obtained are used to evaluate the influences of crack location, material gradients and non-linear behaviour of material on the delamination fracture in the split cantilever beam under consideration. The distribution of the J-integral value along the crack front is analyzed too. It is found that the strain energy release rate can be reduced by appropriate selection of the material gradients in the design stage of two-dimensional functionally graded multilayered beams. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Strength, Fracture and Complexity iospress

Non-linear elastic analysis of delamination in two-dimensional functionally graded multilayered beams

Strength, Fracture and Complexity , Volume 11 (4): 17 – Jan 1, 2019

Loading next page...
 
/lp/iospress/non-linear-elastic-analysis-of-delamination-in-two-dimensional-0Xid3fVGmP
Publisher
IOS Press
Copyright
Copyright © 2018 IOS Press and the authors. All rights reserved
ISSN
1567-2069
eISSN
1875-9262
DOI
10.3233/SFC-180233
Publisher site
See Article on Publisher Site

Abstract

An analytical study of delamination fracture in two-dimensional functionally graded multilayered non-linear elastic split cantilever beam configurations is carried out. The beam is made of an arbitrary number of adhesively bonded longitudinal vertical layers, which have different thicknesses and material properties. Besides, the material is two-dimensional functionally grade in the cross-section of each layer. A vertical delamination crack is located arbitrary along the beam width. The beam is loaded eccentrically in tension by a force applied at the free end of the right-hand crack arm. The delamination fracture is studied in terms of the strain energy release rate. A comparison with the J-integral approach is carried out for verification. The results, yielded by the two analyses, are identical. The solutions obtained are used to evaluate the influences of crack location, material gradients and non-linear behaviour of material on the delamination fracture in the split cantilever beam under consideration. The distribution of the J-integral value along the crack front is analyzed too. It is found that the strain energy release rate can be reduced by appropriate selection of the material gradients in the design stage of two-dimensional functionally graded multilayered beams.

Journal

Strength, Fracture and Complexityiospress

Published: Jan 1, 2019

References