Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

New crack generation phenomena by crack collision in 10 mm thick tempered glass

New crack generation phenomena by crack collision in 10 mm thick tempered glass High speed photography by Caustics method using Cranz–Schardin camera was used to study crack propagation and divergence in thermally tempered glass. Tempered 10 mm thick glass plates were used as a specimen. New crack generation by two crack collision was observed. Regarding the presence/absence of new cracks, the dependence of the two cracks on the collision angle was confirmed. Considering that it is based on the synthesis of stress 𝜎CR generated at the crack tip, tensile stress necessary for the generation of new cracks could be created. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Strength, Fracture and Complexity iospress

New crack generation phenomena by crack collision in 10 mm thick tempered glass

Strength, Fracture and Complexity , Volume 14 (1): 13 – Oct 20, 2021

Loading next page...
 
/lp/iospress/new-crack-generation-phenomena-by-crack-collision-in-10-mm-thick-ZPKgiETbSZ
Publisher
IOS Press
Copyright
Copyright © 2021 © 2021 – IOS Press. All rights reserved
ISSN
1567-2069
eISSN
1875-9262
DOI
10.3233/SFC-210280
Publisher site
See Article on Publisher Site

Abstract

High speed photography by Caustics method using Cranz–Schardin camera was used to study crack propagation and divergence in thermally tempered glass. Tempered 10 mm thick glass plates were used as a specimen. New crack generation by two crack collision was observed. Regarding the presence/absence of new cracks, the dependence of the two cracks on the collision angle was confirmed. Considering that it is based on the synthesis of stress 𝜎CR generated at the crack tip, tensile stress necessary for the generation of new cracks could be created.

Journal

Strength, Fracture and Complexityiospress

Published: Oct 20, 2021

There are no references for this article.