Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

The theta approach to creep and creep fracture of forged 1Cr-1Mo-0.25V steel

The theta approach to creep and creep fracture of forged 1Cr-1Mo-0.25V steel Tensile creep and creep fracture properties are presented for a forged 1Cr-1Mo-0.25V rotor steel over stress ranges giving creep lives up to about 1000 hours at 783 to 863 K. The results are described by adopting traditional power-law approaches, before documenting the additional information gained by quantifying the creep curve shapes using the θ methodology. In this way, the observed behaviour patterns are explained in terms of the dislocation processes governing strain accumulation, the localized microstructural instability causing the tertiary acceleration and the eventual neck formation which leads to transgranular failure. Moreover, the θ relationships derived from this short-term test programme are shown to allow prediction of the comprehensive long-term data sets for forged 1Cr-1Mo-0.25V steels determined by the National Research Institute for Metals, Japan. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Strength, Fracture and Complexity IOS Press

The theta approach to creep and creep fracture of forged 1Cr-1Mo-0.25V steel

B. Wilshire; H. Burt
Strength, Fracture and Complexity , Volume 3 (1) – Jan 1, 2005
Download PDF
14 pages

Loading next page...
 
/lp/ios-press/the-theta-approach-to-creep-and-creep-fracture-of-forged-1cr-1mo-0-25v-0MrrDKAj5a

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
IOS Press
Copyright
Copyright © 2005 by IOS Press, Inc
ISSN
1567-2069
eISSN
1875-9262
Publisher site
See Article on Publisher Site

Abstract

Tensile creep and creep fracture properties are presented for a forged 1Cr-1Mo-0.25V rotor steel over stress ranges giving creep lives up to about 1000 hours at 783 to 863 K. The results are described by adopting traditional power-law approaches, before documenting the additional information gained by quantifying the creep curve shapes using the θ methodology. In this way, the observed behaviour patterns are explained in terms of the dislocation processes governing strain accumulation, the localized microstructural instability causing the tertiary acceleration and the eventual neck formation which leads to transgranular failure. Moreover, the θ relationships derived from this short-term test programme are shown to allow prediction of the comprehensive long-term data sets for forged 1Cr-1Mo-0.25V steels determined by the National Research Institute for Metals, Japan.

Journal

Strength, Fracture and Complexity – IOS Press

Published: Jan 1, 2005

There are no references for this article.