Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Model of the structure of the near tip area of interface crack in a piece-homogeneous elastic-plastic body

Model of the structure of the near tip area of interface crack in a piece-homogeneous... The model of interface crack, which assumes the existence near its tip the area of the contact of faces interactive by the law of dry friction, and the plastic zone with the small scale destruction zone in the part adjoining the crack tip with the high level of tensile and shear deformations is extended in the article. Modelling a plastic zone under the plane strain conditions by the line of displacement rupture inclined to the interface and using the Wiener-Hopf method the equations for calculating the length and orientation of the plastic zone, the sizes of the contact faces area and of the destruction zone, the stress singularity indexes near the crack tip under the conditions of the prevailing shear or tensile loading were obtained. It is established that due to the formation of a lateral plastic zone near the crack tip at the prevailing tensile loading, the length of the contact area depends not only on the configuration but also on the module of loading. Herewith its value appears to be on a few more orders than if a plastic zone was absent. The change of the stress singularity index at approach to the crack tip is revealed. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Strength, Fracture and Complexity IOS Press

Model of the structure of the near tip area of interface crack in a piece-homogeneous elastic-plastic body

Strength, Fracture and Complexity , Volume 11 (1): 20 – Jan 1, 2018

Loading next page...
 
/lp/ios-press/model-of-the-structure-of-the-near-tip-area-of-interface-crack-in-a-QhU3oYf710

References (40)

Publisher
IOS Press
Copyright
Copyright © 2018 IOS Press and the authors. All rights reserved
ISSN
1567-2069
eISSN
1875-9262
DOI
10.3233/SFC-180211
Publisher site
See Article on Publisher Site

Abstract

The model of interface crack, which assumes the existence near its tip the area of the contact of faces interactive by the law of dry friction, and the plastic zone with the small scale destruction zone in the part adjoining the crack tip with the high level of tensile and shear deformations is extended in the article. Modelling a plastic zone under the plane strain conditions by the line of displacement rupture inclined to the interface and using the Wiener-Hopf method the equations for calculating the length and orientation of the plastic zone, the sizes of the contact faces area and of the destruction zone, the stress singularity indexes near the crack tip under the conditions of the prevailing shear or tensile loading were obtained. It is established that due to the formation of a lateral plastic zone near the crack tip at the prevailing tensile loading, the length of the contact area depends not only on the configuration but also on the module of loading. Herewith its value appears to be on a few more orders than if a plastic zone was absent. The change of the stress singularity index at approach to the crack tip is revealed.

Journal

Strength, Fracture and ComplexityIOS Press

Published: Jan 1, 2018

There are no references for this article.