Access the full text.
Sign up today, get DeepDyve free for 14 days.
D. Taplin, R. Gifkins (1967)
Comment on “Cavity growth mechanisms during creep”Acta Metallurgica, 15
K. Padmanabhan (2009)
Grain boundary sliding controlled flow and its relevance to superplasticity in metals, alloys, ceramics and intermetallics and strain-rate dependent flow in nanostructured materialsJournal of Materials Science, 44
D. Das, A. Samanta, P. Chattopadhyay (2006)
Deformation Behavior of Bulk Ultrafine Grained Copper Prepared by Sub-Zero Rolling and Controlled RecrystallizationMaterials and Manufacturing Processes, 21
W. Blum, J. Dvořák, P. Král, P. Eisenlohr, V. Sklenička (2014)
Effect of grain refinement by ECAP on creep of pure CuMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 590
E. Hall (1951)
The Deformation and Ageing of Mild Steel: III Discussion of Results, 64
J. Schneibel, M. Heilmaier, W. Blum, G. Hasemann, T. Shanmugasundaram (2011)
Temperature dependence of the strength of fine- and ultrafine-grained materialsActa Materialia, 59
N. Petch (1953)
The Cleavage Strength of Polycrystals, 174
Dipti Samantaray, S. Mandal, A. Bhaduri (2009)
A comparative study on Johnson Cook, modified Zerilli–Armstrong and Arrhenius-type constitutive models to predict elevated temperature flow behaviour in modified 9Cr–1Mo steelComputational Materials Science, 47
R. Armstrong (2014)
Engineering science aspects of the Hall–Petch relationActa Mechanica, 225
R. Carreker, W. Hibbard (1953)
Tensile deformation of high-purity copper as a function of temperature, strain rate, and grain sizeActa Metallurgica, 1
M. Nganbe, A. Fahim (2010)
Equicohesion: Intermediate Temperature Transition of the Grain Size Effect in the Nickel-Base Superalloy PM 3030Journal of Materials Engineering and Performance, 19
J. Schneibel, M. Heilmaier (2014)
Hall–Petch Breakdown at Elevated TemperaturesMaterials Transactions, 55
N. Balasubramanian, J. Li (1970)
The activation areas for grain boundary slidingJournal of Materials Science, 5
F. Hauser, Philip London, J. Dorn (1956)
Fracture of Magnesium Alloys at Low TemperatureJOM
H. Somekawa, T. Mukai (2015)
Hall–Petch Breakdown in Fine-Grained Pure Magnesium at Low Strain RatesMetallurgical and Materials Transactions A, 46
W. Blum, X. Zeng (2009)
A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall–Petch strengthening and enhanced strain rate sensitivityActa Materialia, 57
S. Kumar, T. Raghu, P. Bhattacharjee, G. Rao, U. Borah (2015)
Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloyJournal of Materials Science, 50
T. Langdon (2006)
Grain boundary sliding revisited: Developments in sliding over four decadesJournal of Materials Science, 41
H. Asgharzadeh, Masoud Niazi, A. Simchi (2015)
A Processing Map for Hot Deformation of an Ultrafine-Grained Aluminum-Magnesium-Silicon Alloy Prepared by Mechanical Milling and Hot ExtrusionMetallurgical and Materials Transactions A, 46
H. Conrad, W. Robertson (1958)
CREEP CHARACTERISTICS OF MAGNESIUM SINGLE CRYSTALS FROM 78 TO 364 K
(1956)
Deformation and fracture mechanisms of polycrystalline magnesium at low temperatures
N. Kucher, R. Prikhod’ko (2013)
Prediction of High-Temperature Long-Term Strength of MaterialsStrength of Materials, 45
Z. Cai, Fu-xiao Chen, Junqing Guo (2015)
Constitutive model for elevated temperature flow stress of AZ41M magnesium alloy considering the compensation of strainJournal of Alloys and Compounds, 648
N. Balasubramanian, J. Li (1970)
The activation areas for creep deformationJournal of Materials Science, 5
G. Rao, Y. Prasad (1983)
Contribution of texture to the strengthening and fracture in hot-rolled magnesium-12·7 at % cadmium alloyJournal of Materials Science, 18
D. Wilson, J. Chapman (1963)
Effects of preferred orientation on the grain size dependence of yield strength in metalsPhilosophical Magazine, 8
(1958)
The correlation of the stress-rupture properties of the Nimonic alloys
(1919)
Effect of temperature, deformation, and grain size on the mechanical properties of metals
A. Perry (1974)
Cavitation in creepJournal of Materials Science, 9
S. Mannan, P. Rodriguez (1983)
Effect of grain size on creep rate in type 316 stainless steel at 873 and 973 KMetal science, 17
(1962)
The room-temperature ductility of fine-grained magnesium
(1958)
High-temperature deformation of steels: A study of equicohesion, activation energies, and structural modifications
M. Gzyl, A. Rosochowski, S. Boczkal, M. Qarni (2015)
The Origin of Fracture in the I-ECAP of AZ31B Magnesium AlloyMetallurgical and Materials Transactions A, 46
R. Armstrong, I. Codd, R. Douthwaite, N. Petch (1962)
The plastic deformation of polycrystalline aggregatesPhilosophical Magazine, 7
G. Rao, Y. Prasad (1982)
Grain boundary strengthening in strongly textured magnesium produced by hot rollingMetallurgical Transactions A, 13
F. Abe (2015)
Creep Behavior, Deformation Mechanisms, and Creep Life of Mod.9Cr-1Mo SteelMetallurgical and Materials Transactions A, 46
Y. Prasad, H. Gegel, S. Doraivelu, J. Malas, J. Morgan, K. Lark, D. Barker (1984)
Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242Metallurgical Transactions A, 15
(1964)
A volume-fluctuation model for self-diffusion in crystalline solids
K. Osakada (2010)
History of plasticity and metal forming analysisJournal of Materials Processing Technology, 210
Dipti Samantaray, S. Mandal, A. Bhaduri, P. Sivaprasad (2010)
An overview on constitutive modelling to predict elevated temperature flow behaviour of fast reactor structural materialsTransactions of the Indian Institute of Metals, 63
(1976)
Microstructural changes and plastic anisotropy in strip drawn copper
N. Petch, Ronald Armstrong (1990)
The tensile testActa Metallurgica Et Materialia, 38
Jun Cai, Kuai-She Wang, Chengpeng Miao, Wenbing Li, Wen Wang, Jie Yang (2015)
Constitutive analysis to predict high-temperature flow behavior of BFe10-1-2 cupronickel alloy in consideration of strainMaterials & Design, 65
Y. Lin, Xiao-Min Chen (2010)
A combined Johnson–Cook and Zerilli–Armstrong model for hot compressed typical high-strength alloy steelComputational Materials Science, 49
Cheng Chen, Haiqing Yin, I. Humail, Yuhui Wang, X. Qu (2007)
A comparative study of a back propagation artificial neural network and a Zerilli–Armstrong model for pure molybdenum during hot deformationInternational Journal of Refractory Metals & Hard Materials, 25
R. Armstrong (1974)
The strengthening or weakening of polycrystals due to the presence of grain boundariesCanadian Metallurgical Quarterly, 13
W. Blum, Yujiao Li, Yue Zhang, J. Wang (2011)
Deformation resistance in the transition from coarse-grained to ultrafine-grained Cu by severe plastic deformation up to 24 passes of ECAPMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 528
W. Blum, J. Dvořák, P. Král, M. Petrenec, P. Eisenlohr, V. Sklenička (2015)
In situ study of microstructure and strength of severely predeformed pure Cu in deformation at 573 KPhilosophical Magazine, 95
Peiman Roodposhti, A. Sarkar, K. Murty (2015)
Microstructural development of high temperature deformed AZ31 magnesium alloysMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 626
(1964)
Relationship between grain size + intergranular cavitation −114 percent manganese +70 +30 alpha brass
(1967)
The dependence of the hardness of cartridge brass on grain size
R. Armstrong (1997)
STRENGTH AND DUCTILITY OF METALSTransactions of The Indian Institute of Metals, 50
Zhihao Yao, Mai-cang Zhang, Jian-Xin Dong (2013)
Stress Rupture Fracture Model and Microstructure Evolution for WaspaloyMetallurgical and Materials Transactions A, 44
A. Mukherjee (2002)
An examination of the constitutive equation for elevated temperature plasticityMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 322
F. Larson, James Miller (1952)
A Time-Temperature Relationship for Rupture and Creep StressesJournal of Fluids Engineering
M. Tamura, F. Abe, K. Shiba, H. Sakasegawa, H. Tanigawa (2013)
Larson–Miller Constant of Heat-Resistant SteelMetallurgical and Materials Transactions A, 44
R. Fleck, D. Taplin (1973)
Grain size strengthening and weakening in a copper base alloyJournal of Materials Science, 8
Woo-Gon Kim, Jae-Young Park, I. Ekaputra, Seon-Jin Kim, Min-Hwan Kim, Yong-Wan Kim (2015)
Creep deformation and rupture behavior of Alloy 617Engineering Failure Analysis, 58
H. Conrad (1958)
An investigation of the rate controlling mechanism for plastic flow of copper crystals at 90° and 170°KActa Metallurgica, 6
Hongyi Zhan, Gui Wang, D. Kent, M. Dargusch (2014)
Constitutive modelling of the flow behaviour of a β titanium alloy at high strain rates and elevated temperatures using the Johnson–Cook and modified Zerilli–Armstrong modelsMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 612
M. Srinivas, G. Malakondaiah, R. Armstrong, P. Rao (1991)
Ductile fracture toughness of polycrystalline armco iron of varying grain sizeActa Metallurgica Et Materialia, 39
F. Nabarro (2000)
Grain size, stress, and creep in polycrystalline solidsPhysics of the Solid State, 42
(1919)
Discussion to reference [7]
F. Zerilli, R. Armstrong (1987)
Dislocation-mechanics-based constitutive relations for material dynamics calculationsJournal of Applied Physics, 61
J. Gurland, S. Rawal (2013)
Observations on the Effect of Cementite Particles on the Fracture of Spheroidized Carbon Steels
A. Ammouri, G. Kridli, G. Ayoub, R. Hamade (2015)
Relating grain size to the Zener-Hollomon parameter for twin-roll-cast AZ31B alloy refined by friction stir processingJournal of Materials Processing Technology, 222
C. Cepeda-Jiménez, J. Molina-Aldareguia, F. Carreño, M. Pérez-Prado (2015)
Prominent role of basal slip during high-temperature deformation of pure Mg polycrystalsActa Materialia, 85
R. Fleck, G. Cocks, D. Taplin (1970)
The influence of polycrystal grain size upon the creep ductility of copperMetallurgical Transactions, 1
V. Kutumbarao, P. Rao (1973)
Effect of grain size on the creep and creep rupture behaviour of a CrMnN austenitic stainless steelScripta Metallurgica, 7
Xiawei Yang, Wenya Li (2015)
Flow Behavior and Processing Maps of a Low-Carbon Steel During Hot DeformationMetallurgical and Materials Transactions A, 46
R. Armstrong (1968)
Theory of the tensile ductile-brittle behavior of poly-crystalline h.c.p. materials, with application to beryllium☆Acta Metallurgica, 16
Qizhen Li (2012)
Mechanical properties and microscopic deformation mechanism of polycrystalline magnesium under high-strain-rate compressive loadingsMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 540
S. Ray, K. Samuel, S. Mannan, P. Rodriguez (1987)
Grain size dependence of saturation deformation behaviour of SS 316 at 1123 KMaterials Science and Technology, 3
(1975)
The grain size dependence of flow and fracture in a Cr-Mn-N austenitic steel from 300 to 1300 K
F. Zerilli (2004)
Dislocation mechanics-based constitutive equationsMetallurgical and Materials Transactions A, 35
A. Villani, E. Busso, S. Forest (2015)
Field theory and diffusion creep predictions in polycrystalline aggregatesModelling and Simulation in Materials Science and Engineering, 23
R. Armstrong (2016)
Dislocation Pile-Ups, Material Strength Levels, and Thermal ActivationMetallurgical and Materials Transactions A, 47
Jiang Li, Fuguo Li, Jun Cai, Ruiting Wang, Zhanwei Yuan, G. Ji (2013)
Comparative investigation on the modified Zerilli–Armstrong model and Arrhenius-type model to predict the elevated-temperature flow behaviour of 7050 aluminium alloyComputational Materials Science, 71
C. Zener, J. Hollomon (1944)
Effect of Strain Rate Upon Plastic Flow of SteelJournal of Applied Physics, 15
J. Hutchinson (1977)
Creep and plasticity of hexagonal polycrystals as related to single crystal slipMetallurgical Transactions A, 8
M. Barnett, Z. Keshavarz, A. Beer, D. Atwell (2004)
Influence of grain size on the compressive deformation of wrought Mg–3Al–1ZnActa Materialia, 52
(1965)
A note on the relationship between cavitation and ductility
E. Farabi, A. Zarei‐Hanzaki, Hamid Abedi (2014)
High Temperature Formability Prediction of Dual Phase Brass Using Phenomenological and Physical Constitutive ModelsJournal of Materials Engineering and Performance, 24
A review is given in honor of David Taplin’s researches, with colleagues and students, on grain size aspects of the higher temperature plastic deformation and failure behaviors of metals and alloys. Comparison is made with lower temperature grain size strengthening measurements and their Hall–Petch (H–P) dislocation pile-up model description. One focus is on H–P prediction of the true fracture strain dependence on grain size or particle spacing. The second focus is on the relationship between the thermal activation based Zerilli–Armstrong (Z–A) relations for fcc or bcc metal strength levels and the historical Zener–Hollomon (Z–H) and Larson–Miller (L–M) parameters employed to describe the combination of higher temperature and lower strain rate, or creep type, results. Particular measurements are reviewed for copper, magnesium, copper-nickel Monel alloy, titanium, nickel, aluminum alloy and ferritic and austenitic steel materials.
Strength, Fracture and Complexity – IOS Press
Published: Jan 1, 2018
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.