Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Covarying Shell Growth Parameters and the Regulation of Shell Shape in Marine Bivalves: A Case Study on Tellinoidea

Covarying Shell Growth Parameters and the Regulation of Shell Shape in Marine Bivalves: A Case... Covarying Shell Growth Parameters and the Regulation of Shell Shape in Marine Bivalves: A Case Study on Tellinoidea div.banner_title_bkg div.trangle { border-color: #9E6C84 transparent transparent transparent; opacity:0.77; /*new styles start*/ -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=77)" ;filter: alpha(opacity=77); /*new styles end*/ } div.banner_title_bkg_if div.trangle { border-color: transparent transparent #9E6C84 transparent ; opacity:0.77; /*new styles start*/ -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=77)" ;filter: alpha(opacity=77); /*new styles end*/ } div.banner_title_bkg div.trangle { width: 249px; } #banner { background-image: url('http://images.hindawi.com/journals/jmb/jmb.banner.jpg'); background-position: 50% 0;} Hindawi Publishing Corporation Home Journals About Us Journal of Marine Biology About this Journal Submit a Manuscript Table of Contents Journal Menu About this Journal · Abstracting and Indexing · Aims and Scope · Article Processing Charges · Articles in Press · Author Guidelines · Bibliographic Information · Citations to this Journal · Contact Information · Editorial Board · Editorial Workflow · Free eTOC Alerts · Publication Ethics · Reviewers Acknowledgment · Submit a Manuscript · Subscription Information · Table of Contents Open Special Issues · Published Special Issues · Special Issue Guidelines Abstract Full-Text PDF Full-Text HTML Full-Text ePUB Linked References How to Cite this Article Journal of Marine Biology Volume 2014 (2014), Article ID 519510, 10 pages http://dx.doi.org/10.1155/2014/519510 Research Article Covarying Shell Growth Parameters and the Regulation of Shell Shape in Marine Bivalves: A Case Study on Tellinoidea Jean Béguinot 1,2 1 Société d’Histoire Naturelle, 12 rue des Pyrénées, 71200 Le Creusot, France 2 Biogéosciences, Université de Bourgogne, 21000 Dijon, France Received 12 February 2014; Revised 25 April 2014; Accepted 4 May 2014; Published 29 May 2014 Academic Editor: Ricardo Serrão Santos Copyright © 2014 Jean Béguinot. This is an open access article distributed under the Creative Commons Attribution License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Abstract Specific parameters characterising shell shape may arguably have a significant role in the adaptation of bivalve molluscs to their particular environments. Yet, such functionally relevant shape parameters (shell outline elongation, dissymmetry, and ventral convexity) are not those parameters that the animal may directly control. Rather than shell shape, the animal regulates shell growth. Accordingly, an alternative, growth-based description of shell-shape is best fitted to understand how the animal may control the achieved shell shape. The key point is, in practice, to bring out the link between those two alternative modes of shell-shape descriptions, that is, to derive the set of equations which connects the growth-based shell-shape parameters to the functionally relevant shell-shape parameters. Thus, a preliminary object of this note is to derive this set of equations as a tool for further investigations. A second object of this work is to provide an illustrative example of implementation of this tool. I report on an unexpected negative covariance between growth-based parameters and show how this covariance results in a severe limitation of the range of interspecific variability of the degree of ventral convexity of the shell outline within the superfamily Tellinoidea. Hypotheses are proposed regarding the constraints possibly at the origin of this limitation of interspecific variability. 1. Introduction Since Réaumur [ 1 ] at least, the shape of molluscs shells is relevantly understood, not simply as a geometrical figuration per se , defined at the outset, but also as the result of a cumulative growth process (of biomineral accretion). Accordingly, molluscan shells are one among those “archetypal” examples favoured by Thompson [ 2 ], where growth process definitely rules the resulting form which, indeed, would not make any sense being separated from its generating pathway. Defining more precisely the geometrical relationships relating the achieved shell shape to the involved shell-growth parameters is more recent however and was first developed in the framework of approximately conispirally coiled gastropod shells [ 3 – 7 ]. In bivalves, the shell-growth process has frequently been schematised using a set of vectors diverging from the valve umbo and rejoining the valve margin [ 8 – 10 ], the length of each vector thus representing the relative growth progress in the corresponding direction. This growth-based approach of shell-shape description is especially appropriate when addressing how the animal actually controls shell growth, so as to achieve a definite shell shape. Alternatively, when focus is put upon the functional role of shell shape, another kind of shape descriptors is preferentially required, typically including shell elongation, the degrees of dissymmetry, and of ventral convexity of shell outline [ 9 , 10 ]. Thus, while providing alternative descriptions of the same reality (the shell shape), these two distinct approaches, respectively, address different, complementary contexts, in terms of the animal concerns. In other words, while the animal survival success may partially depend upon the (presumably) functionally relevant set of shell-shape parameters [ 9 – 29 ], the animal control upon this category of shell-shape parameters is only indirect, readily operating only via the accretionary growth process of shell, which is best accounted for by the set of growth-based shape parameters (defined below). Accordingly, a rational understanding of how a functionally adequate shell outline is achieved through the animal’s direct control of the shell-growth process requires deriving, at first, the relationships between both sets of descriptive parameters of the shell outline. Hence, the derivation of the system of equations linking the functionally relevant set and the growth-based set of parameters describing shell outline is a preliminary object of this work. Then, in practice, these equations may serve as a tool to investigate how the growth-based parameters (and, as it happens, the existence of specific covariance between these parameters) can ultimately control the ranges of variation of each of the functionally relevant parameters. An illustrative example is proposed, within the marine bivalves superfamily Tellinoidea (Blainville 1814), demonstrating how a strong negative covariance between two specific growth-based parameters (“ α ” and “ ρ ,” defined below) results, in particular, in a substantial limitation of the range of interspecific variation of one of the functionally relevant shell-shape parameters, the degree of ventral convexity of the shell outline. This covariance and the resulting restriction of the range of interspecific variation of ventral convexity arguably answer ecological constraints applying to bivalve shell shape. Interestingly, it is worth noting that regulating processes purposely involving negative covariances between growth parameters are already known, in both gastropods [ 30 , 31 ] and bivalves [ 32 ], as a means to limit excessive intra specific variations of the adult-shell size (while, here, the regulation aims at limiting inter specific differences regarding shell shape ). 2. Relating the Functionally Relevant Shell Shape Parameters to the Growth-Based Shell Shape Parameters In a growth-based approach of shell shape, the sagittal outline of shells may be appropriately parameterised synthetically using three indices associated to three “typical growth vectors” (Figure 1 ), each of them extending from the valve umbo . The umbo (or “apex”) is defined, here, as “ the extreme dorsal side near the umbo itself ,” as quoted by Galtsoff [ 8 ]; see also [ 9 ]. being the valve length , then vectors and , respectively, join the apex to the shell outline at the extremities and of the segment and vector joins the apex to the shell outline at point via the middle of segment . Finally, the segment is perpendicular to xx ′, parallel through to . Figure 1: Definition of two alternative sets of descriptors of the shell outline: (a) the three growth-based parameters: apical angle α (= BÂC ); differential growth index ; dissymmetric growth index ; (b) the three functionally relevant parameters: elongation , dissymmetry , and ventral convexity . Three growth-based indices are defined as follows: (i) the apical angle “ α ” (angle BÂC ); (ii) the differential growth index “ ρ ” identified as the ratio between axial (dorsoventral) growth and mean lateral growth, ; (iii) the dissymmetric growth index “ δ ” identified as the ratio of the larger to the smaller lateral growth vectors, . These three parameters are geometrically independent factors, in the sense that no mutual dependence between α , ρ , and δ is compelled by purely geometric constraint: the direction and/or module of each vector may, indeed, freely be changed independently of the two others, in a purely geometric perspective. These three parameters thus account schematically for the growth pattern of valves. Alternatively, in a functionally relevant approach, the main traits of the shape of shell outline may be synthetically characterised by (i) the shell elongation, that is, the ratio of contour length to contour height, (ii) the valve dissymmetry, namely, the degree of dissymmetry of the position of the umbo versus the anterior and posterior extremities of shell, and (iii) the ventral convexity, that is, the degree of prominence of the ventral side of the shell outline, opposite to umbo. Three indices are defined correspondingly (Figure 1 ): the “shell elongation” index “ ” as the ratio , the “shell dissymmetry” index “ ” as the ratio , and the “ventral convexity” index “ ” as the ratio . Note that choosing, in both approaches, a limited number of parameters to describe the shell outline, rather than implementing more refined approaches, such as Fourier analysis of shell contour, is deliberate. As the shell outline in bivalves is generally relatively simple, the main traits of shell outline may be fairly well captured by even a limited number of appropriately chosen parameters [ 33 ]. Moreover, a major advantage of limiting the number of parameters is that the equations linking growth-based and functionally relevant shape parameters may be derived under an explicitly analytical form, as more appropriate to readily bring out and highlight the rationale behind the equations. As for the three growth-based parameters α , ρ , and δ above, these three functionally relevant parameters , , and , are, intrinsically, free from any geometrical constraint a priori and thus mutually independent. Yet, , , and are entirely dependent a posteriori upon the growth parameters α , ρ , and δ , according to the three geometrically based equations below (see Appendix for further details and a demonstration): The way each of the three parameters , , and depends upon each of the three governing parameters α , ρ , and δ may be quantified by considering the corresponding partial derivatives: , , , , , , , and . In short: (i) the shell elongation is (as expected) monotonously increasing with the apical angle α and monotonously decreasing with the differential-growth index ρ ; the dependence of upon the growth-dissymmetry index δ is less intuitive but is also monotonously positive; (ii) the shell dissymmetry is strongly increasing with the growth-dissymmetry index δ and, less intuitively, is decreasing with the apical angle α ; (iii) the ventral convexity of the shell outline is strongly increasing with both the apical angle α and the differential-growth index ρ and weakly decreasing with the growth-dissymmetry index δ . An overview of the variations (i) of the shell elongation and ventral convexity , according to α , ρ , at given δ , is provided in Figures 2(a) and 2(b) ; (ii) of the shell dissymmetry , according to α , δ , is provided in Figure 2(c) . Figure 2: The elongation , the ventral convexity , and the dissymmetry of shell outline computed against growth-based parameters (( 1 ), ( 2 ), and ( 3 )). Ventral convexity is increasing with both α and ρ , while the elongation increases with α but decreases with ρ . The dissymmetry increases with δ and decreases with α . 3. A Negative Covariance between Growth-Based Parameters α and ρ and the Consequences upon the Ranges of Interspecific Variations of the Shell Elongation and the Ventral Convexity , in Tellinoidea The modules of growth vectors , , and the apical angle α between and were measured for 85 species belonging to the two larger genera within the superfamily Tellinoidea, distributed worldwide: 36 species of Donax , 49 species of Tellina , using iconographic data by Robin [ 34 ]. Parameters α , ρ , δ and , , were then computed according to the definitions and equations above. One particular, unexpected feature emerging from this study is a negative covariance occurring between the differential growth index ρ and the apical angle α (Figure 3 ). The trend is statistically highly significant ( , , for Donax; , , for Tellina ; no explanation is suggested as to why the strength of covariance seems stronger for Tellina than for Donax ). No or weakly significant covariances occur between the index of growth dissymmetry δ and each of the two other growth parameters, α and ρ ( , ; , ; , ; , ). Figure 3: The differential growth index ρ plotted against the apical angle α : a strong negative covariance is recorded within each of the two studied bivalves genera, Donax and Tellina . (N.B.: similar patterns of negative covariation between α and ρ are observed, as well, within the other, smaller genus belonging to Tellinoidea: Arcopagia, Gari, Macoma ; Béguinot, unpublished results ). The occurrence of a strong covariance between growth factors (here between α and ρ ) was unexpected since, as mentioned above, these factors are mutually independent a priori , free from any prior geometrical constraint. This, in turn, suggests the involvement of another kind of constraint, of arguably biological origin as discussed later on. In turn, this strong negative covariance between the growth-based parameters α and ρ has direct consequences upon how the functionally relevant parameters, especially and , are actually dependent upon α and ρ . Theoretically, any given value of the shell elongation (or of the ventral convexity ) may be obtained by an infinity of different combinations of values of α and ρ (see ( 1 ) and ( 3 ) or Figures 2(a) and 2(b) ). In fact, the strong covariance between α and ρ strongly constrains the pattern of dependence of both and upon α and ρ , as highlighted by Figures 4(a) and 4(b) and Figures 5(a) and 5(b) . For example, the lowest values of shell elongation are systematically associated with both the highest values of ρ and the lowest values of α and the reverse stands for the highest values of . This is particularly striking for Tellina (Figure 4(b) ) due to the especially strong negative covariance within this genus (Figure 3 ). The rationale behind this pattern is easily understood from the fact that and in ( 1 ) (graphically presented in Figure 2(a) ). The pattern is different for the ventral convexity , in accordance with and being both > 0 in ( 3 ) (graphically presented in Figure 2(b) ). Figure 4: The shell elongation E plotted against the growth-based parameters α and ρ , for 36 species within the genus Donax (a) and 49 species within the genus Tellina (b)— black triangles : apical angle α (°/100); grey dots : differential growth index ρ . The increase of α and decrease of ρ with growing E are both highly significant for both genera ( in all cases). Figure 5: The ventral convexity K plotted against the growth-based parameters α and ρ , for 36 species within the genus Donax (a) and 49 species within the genus Tellina (b)— black triangles : apical angle α (°/100); grey dots : differential growth index ρ . The increase of α and decrease of ρ with growing K for Donax are highly significant ( ) and significant ( ), respectively. For Tellina , the trends are not significant ( for both). 4. Discussion 4.1. Linking the Main Traits of Shell Outline to the Growth-Based Parameters Reducing the morphological description of bivalve shell outline to a set of only three (mutually independent) parameters may seem excessive reductionism, a rather schematic approach. Yet, as is often the case (at least for simple shapes), even a few, but adequately selected, parameters may already capture much of the displayed data [ 33 ]. Moreover, focusing upon a few (major) parameters allows keeping a convenient analytical form to the equations linking the shell shape to the growth development and thus helps highlight the rationale behind these equations. In bivalves, the shell elongation , the shell dissymmetry , and the ventral convexity (defined in Figure 1 ) would likely be the main traits of the shell outline captured at first glance. Also, these parameters may arguably quantify some traits of shell contour potentially having significant functionalities, relevant to the animal survival success ( and/or : [ 9 – 28 ]; : [ 29 ]). Parallel to these three functionally relevant parameters , , and , three growth-based parameters α , ρ , and δ provide an alternative description of the shell outline, deliberately focused, this time, upon the developmental process which, finally, generate this particular shell outline. The functionally relevant parameters are related to the growth-based parameters by a set of geometrically based governing equations ( 1 ), ( 2 ), and ( 3 ). These equations rule the sign and degree of dependence of each functionally relevant parameter, , , , upon each growth-based parameter, α , ρ , and δ . Their analytical mode of expression opportunely allows an easy derivation of the trends of variations of , , according to α , ρ , and δ , as summarized in Table 1 . Table 1: The signs of the variations, / , / , / , / , / , / , / , and / of the functionally relevant parameters , , and , according to variations of the growth-based parameters , , and (according to Section 2 ). 4.2. The Regulation of the Ranges of Variation of Functionally Relevant Parameters via Appropriate Covariances between the Growth-Based Parameters If a given functionally relevant parameter has dependences of the same sign (either >0 or <0) upon two growth-based parameters, then a positive covariance between these two growth-based parameters will tend to increase the range of variation of the considered functionally relevant parameter (as compared to what would be this range of variation if there was no covariance between these two growth-based parameters). And, conversely, a negative covariance between these two growth-based parameters will tend to decrease the range of variation of the considered functionally relevant parameter. If a given functionally relevant parameter has dependences of opposite signs upon two growth-based parameters, then a positive covariance between these two growth-based parameters will tend to decrease the range of variation of the considered functionally relevant parameter. And, conversely, a negative covariance between these two growth-based parameters will tend to increase the range of variation of the considered functionally relevant parameter. Based on information provided in Table 1 for the signs of the dependence of , , upon α , ρ , and δ in bivalves, it is thus possible to predict how the range of variation of each of the three functionally relevant parameters, , , , is either enlarged or restricted according to the occurrence and sign of any particular covariance between the growth-based parameters α , ρ , and δ . 4.3. Covariance between Growth Parameters and the Resulting Pattern of Regulation of Shell Shape in the Superfamily Tellinoidea Moving now from theoretical preliminaries to practical applications, one important and unexpected feature emerges from a survey of the interspecific variations of growth-based parameters within Donax and Tellina , the two larger genera of bivalves belonging to the superfamily Tellinoidea: a strong negative covariance is recorded between the apical angle α and the differential growth ratio ρ (Figure 3 ). This covariance was rather unexpected since, as already mentioned, the growth-based parameters α , ρ , and δ are geometrically independent. In other words, this covariance draws attention upon some biologically relevant constraining process. From a functional point of view, the occurrence of this negative correlation between α and ρ results in conformity with Section 4.2 and Table 2 : (i) in a restriction of the range of variation of the ventral convexity (as compared to what would be this range of variation if there was no covariance between α and ρ ), since the opposite variations of α and ρ tend to mutually cancel their respective effects upon , due to both and having the same sign (>0) in ( 3 ); (ii) conversely, in an extension of the range of variations of the elongation , due to and having opposite signs in ( 1 ). Table 2: The relative variations ( / )/( / ), ( / )/( / ), ( / )/( / ), ( / )/( / ), ( / )/( / ), ( / )/( / ), ( / )/( / ), ( / )/( / ), and ( / )/( / ) of the functionally relevant parameters , , , according to variations of the growth-based parameters , , . Thus, the negative correlation which actually constrains the variations of α and ρ allows a large range of interspecific variations of the shell elongation with, yet, limited collateral influence upon the ventral convexity . Specifically, for the same variation of valve elongation (say from 1.2 to 2.2), the resulting computed variation of is 2.23 times smaller due to the negative covariance recorded between α and ρ than it would be if the elongation would proceed, for example, from the variation of α alone. 4.4. Discussing the Possible Origins of the Negative Covariance between the Growth-Based Parameters α and ρ The constraining covariance between growth-based parameters α and ρ reported within the superfamily Tellinoidea may have either (i) a developmental origin, as directly operating on the orientations and respective sizes of the “growth vectors” and thus on α and ρ , or (ii) an adaptive origin, as the result of a selective process, more readily involving one or several of the functionally relevant parameters , , . Distinguishing between these two hypotheses, however, is far from being easy [ 35 ]. Yet, a comparison of the present results with the data obtained for the intraspecific variations recorded within Donax trunculus (Linné, 1758) and Donax vittatus (da Costa, 1778) may possibly help to cast some light on the question. At the intraspecific level, a positive covariance between ρ and δ is recorded in both Donax trunculus and Donax vittatus (Béguinot, unpublished data ), instead of the negative covariance between α and ρ observed at the interspecific level within Tellinoidea. This positive covariance between ρ and δ results, accordingly (Section 4.2 and Table 1 ), in a restriction of the ranges of intraspecific variation of both the elongation and the ventral convexity of shell outline. These contrasted patterns between the intraspecific and the interspecific levels, regarding both the type of covariance and the associated consequences, should likely make more sense in an “adaptive” perspective than according to a “developmental” point of view. The logic is not easy to understand, indeed, behind a hypothetic developmental constraint applied directly to growth-based parameters and which moves—seemingly somewhat arbitrarily—from a positive covariance between ρ and δ at the intraspecific level to a negative covariance between α and ρ at the interspecific level. The associated consequences, in terms of the extension of the range of variation of the presumably functionally related parameters and , would be more readily understandable. A regulation makes sense, which tends to reduce the ranges of variations of functionally relevant phenotypic characters at the intraspecific level and, on the contrary, contributes to enlarge these ranges of variations at the interspecific level. And this is the case, here, for the shell elongation —although the range of variation of the ventral convexity remains restricted at both intra- and interspecific levels. Now, what might be the selective advantage of restraining the variability of ventral convexity , inclusively at the interspecific level? Some tentative arguments may be suggested. The ventral portion of valves is often the weakest and, thus, more at risks [ 13 ], since the ventral part of the shell, especially the posteroventral sector, is ordinarily less thick and thus less resistant than the dorsal part. Increasing ventral convexity, that is, ventral prominence, would thus enlarge the corresponding weakened zone. Also, a larger convexity would tend to reduce the sealing pressure along the ventral margin (at given unchanged positions of insertion of the adductor muscles) and thus would make easier the shell opening by predators. Accordingly, a sufficient level of shell mechanical resistance to various kinds of environmentally induced stresses might preclude too high values of ventral convexity. Conversely, a sufficient value of ventral convexity might well be dictated by the avoidance of excessively acute profiles of valves contour at the anterior and posterior extremities (i.e., around and , Figure 1 ) which would inevitably result from too weak a convexity. Such acute portions would be at still greater risks and more prone to suffer local breakage. An optimally centred and size-limited range of values for the ventral convexity of shell outline would thus arguably be selected. Admittedly, the “adaptive” perspective remains to be more firmly confirmed. Extending investigations, combining both the functionally relevant and the growth-based approaches of shell shape and applied to quite a wider range of bivalves groups would probably help to clarify the point. Appendix The Equations Relating the Valve Shape Parameters , , to the Growth Parameters α , ρ , and δ Consider the following: with ; and defined above. N.B.: for the specific case where shells are (sub-) symmetric ( ), the three equations are simplified as In other words, this system of three equations ( A.1 ), ( A.2 ), and ( A.3 ) expresses the tensor relationship linking the two alternative sets of parameters describing the shell outline, α , ρ , δ and . Demonstration of ( A.1 ), ( A.2 ), and ( A.3 ) . The following, classical relationships between angles, sides, and height in triangles are applied here within the triangle (see Figure 1 ): Valve Elongation . Consider Accounting for the definitions of and , it comes that Equation ( A.5 ) yields then From ( A.9 ) and ( A.10 ) Now, and, from ( A.6 ) and ( A.7 ), it follows that and, as , Substituting by its expression in ( A.10 ) yields and then Finally, ( A.11 ) and ( A.14 ) yield for the elongation Valve Dissymmetry . and, according to ( A.5 ) and ( A.6 ), . With ( ) defined at ( A.10 ), it comes that Convexity of the Ventral Contour of Valve. The convexity of the ventral contour of valve is defined by the ratio . From ( A.7 ) and accounting for , it comes that According to ( A.9 ), and . Substitution of and by their expressions above yields finally with ; according to ( A.14 ) and defined by ( A.15 ). Conflict of Interests The author declares that there is no conflict of interests regarding the publication of this paper. Acknowledgment The suggestions from two anonymous reviewers substantially improved the paper. References R. A. Réaumur, “Eclaircissemens de quelques difficultés sur la formation et l'accroissement des coquilles,” in Histoire de l'Académie Royale des Sciences Avec les Mémoires de Mathematique et Physique , pp. 384–394, 1716. D. W. Thompson, On Growth and Form , Cambridge University Press, London, UK, 1942. D. M. Raup, “The geometry of coiling in gastropods,” Proceedings of the National Academy of Sciences of the United States of America , vol. 47, pp. 602–609, 1961. D. M. Raup, “Geometric analysis of shell coiling: general problems,” Journal of Paleontology , vol. 40, no. 5, pp. 1178–1190, 1966. D. E. Schindel, “Unoccupied morphospace and the coiled geometry of gastropods: architectural constraint or geometric covariation,” in Causes of Evolution , R. A. Ross and W. D. Allmon, Eds., pp. 270–304, University of Chicago Press, Chicago, Ill, USA, 1990. B. Tursch, “Spiral growth: the “Museum of all shells” revisited,” Journal of Molluscan Studies , vol. 63, pp. 547–554, 1997. S. H. Rice, “The bio-geometry of mollusc shells,” Paleobiology , vol. 24, no. 1, pp. 133–149, 1998. View at Scopus P. S. Galtsoff, “The American Oyster, Crassostrea virginica Gmelin—morphology and structure of shell,” Fishery Bulletin , vol. 64, pp. 16–47, 1966. A. Sokołowski, K. Pawlikowski, M. Wołowicz, P. Garcia, and J. Namieśnik, “Shell deformations in the Baltic clam Macoma balthica from southern Baltic Sea (the Gulf of Gdansk): hypotheses on environmental effects,” Ambio , vol. 37, no. 2, pp. 93–100, 2008. View at Publisher · View at Google Scholar · View at Scopus N. Caill-Milly, N. Bru, K. Mahé, C. Borie, and F. D’Amico, “Shell shape analysis and spatial allometry patterns of Manila Clam ( Ruditapes philippinarum ) in a mesotidial coastal lagoon,” Journal of Marine Biology , vol. 2012, Article ID 281206, 11 pages, 2012. View at Publisher · View at Google Scholar N. A. Holme, “Notes on the mode of life of the Tellinidae (Lamellibranchia),” Journal of the Marine Biological Association of the United Kingdom , vol. 41, pp. 699–703, 1961. S. M. Stanley, Relation of Shell Form To Life Habits of the Bivalvia (Mollusca) , The Geological Society of America, Boulder, Colo, USA, 1970. G. J. Vermeij, A Natural History of Shells , Princeton University Press, Princeton, NJ, USA, 1993. O. Ellers, “Form and motion of Donax variabilis in flow,” Biological Bulletin , vol. 189, no. 2, pp. 138–147, 1995. View at Scopus A. G. Soares, R. K. Callahan, and A. M. C. De Ruyck, “Microevolution and phenotypic plasticity in Donax serra roding (Bivalvia: Donacidae) on high energy sandy beaches,” Journal of Molluscan Studies , vol. 64, no. 4, pp. 407–421, 1998. View at Scopus L. C. Anderson and P. D. Roopnarine, “Role of constraint and selection in the morphologic evolution of Caryocorbula (Mollusca: Corbulidae) from the Caribbean Neogene,” Palaeontologia Electronica , vol. 8, no. 2, 2005. View at Scopus A. S. Freeman and J. E. Byers, “Divergent induced responses to an invasive predator in marine mussel populations,” Science , vol. 313, no. 5788, pp. 831–833, 2006. View at Publisher · View at Google Scholar · View at Scopus J. Hollander, D. C. Adams, and K. Johannesson, “Evolution of adaptation through allometric shifts in a marine snail,” Evolution , vol. 60, no. 12, pp. 2490–2497, 2006. View at Publisher · View at Google Scholar · View at Scopus J. Hollander, M. L. Collyer, D. C. Adams, and K. Johannesson, “Phenotypic plasticity in two marine snails: constraints superseding life history,” Journal of Evolutionary Biology , vol. 19, no. 6, pp. 1861–1872, 2006. View at Publisher · View at Google Scholar · View at Scopus T. Lakowitz, C. Brönmark, and P. Nyström, “Tuning in to multiple predators: conflicting demands for shell morphology in a freshwater snail,” Freshwater Biology , vol. 53, no. 11, pp. 2184–2191, 2008. View at Publisher · View at Google Scholar · View at Scopus T. C. Edgell and R. Rochette, “Differential snail predation by an exotic crab and the geography of shell-claw covariance in the northwest Atlantic,” Evolution , vol. 62, no. 5, pp. 1216–1228, 2008. View at Publisher · View at Google Scholar · View at Scopus C. D. G. Harley, M. W. Denny, K. J. MacH, and L. P. Miller, “Thermal stress and morphological adaptations in limpets,” Functional Ecology , vol. 23, no. 2, pp. 292–301, 2009. View at Publisher · View at Google Scholar · View at Scopus S. M. Peyer, J. C. Hermanson, and C. E. Lee, “Developmental plasticity of shell morphology of quagga mussels from shallow and deep-water habitats of the Great Lakes,” The Journal of Experimental Biology , vol. 213, no. 15, pp. 2602–2609, 2010. View at Publisher · View at Google Scholar · View at Scopus R. L. Minton, E. M. Lewis, B. Netherland, and D. M. Hayes, “Large differences over small distances: plasticity in the shells of Elimia potosiensis (Gastropoda: Pleuroceridae),” International Journal of Biology , vol. 3, no. 1, pp. 23–32, 2011. S. M. Peyer, J. C. Hermanson, and C. E. Lee, “Effects of shell morphology on mechanics of zebra and quagga mussel locomotion,” The Journal of Experimental Biology , vol. 214, no. 13, pp. 2226–2236, 2011. View at Publisher · View at Google Scholar · View at Scopus J. M. Serb, A. Alejandrino, E. Otárola-Castillo, and D. C. Adams, “Morphological convergence of shell shape in distantly related scallop species (Mollusca: Pectinidae),” Zoological Journal of the Linnean Society , vol. 163, no. 2, pp. 571–584, 2011. View at Publisher · View at Google Scholar · View at Scopus P. Morais, M. M. Rufino, J. Reis, E. Dias, and R. Sousa, “Assessing the morphological variability of Unio delphinus Spengler 1738 (Bivalvia : Uninonidae) using geometric morphometry,” Journal of Molluscan Studies , vol. 80, no. 1, pp. 17–23, 2014. T. D. Levine, H. B. Hansen, and G. W. Gerald, “Effects of shell shape, size, and sculpture in burrowing and anchoring abilities in the freshwater mussel Potamilus alatus (Unionidae),” Biological Journal of the Linnean Society , vol. 111, no. 1, pp. 136–144, 2014. R. D. K. Thomas, “Functional morphology, ecology and evolutionary conservatism in the Glycymerididae (Bivalvia),” Palaeontology , vol. 18, no. 2, pp. 217–254, 1975. S. J. Gould, “A developmental constraint in Cerion, with comments on the definition and interpretation of constraint in evolution,” Evolution , vol. 43, no. 3, pp. 516–539, 1989. View at Scopus J. Béguinot, “Régulation du développement dimensionnel de la coquille chez trois espèces de Gastéropodes,” Bulletin Société Linnéenne de Lyon , vol. 83, no. 5-6, pp. 119–126, 2014. S. C. Ackerly, “Morphogenetic regulation in the shells of bivalves and brachiopods: evidence from the geometry of the spiral,” Lethaia , vol. 25, no. 3, pp. 249–256, 1992. View at Scopus M. J. Rogers, “A description of the generating curve of bivalves with straight hinges,” Palaeontology , vol. 25, no. 1, pp. 109–117, 1982. A. Robin, Encyclopedia of Marine Bivalves , ConchBooks, Hackenheim, Germany, 2011. J. Maynard-Smith, R. Burian, S. Kauffman, et al., “Developmental constraints and evolution: a perspective from the Mountain Lake Conference on development and evolution,” Quarterly Review of Biology , vol. 60, no. 3, pp. 265–287, 1975. var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-8578054-2']); _gaq.push(['_trackPageview']); (function () { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of Marine Biology Hindawi Publishing Corporation

Covarying Shell Growth Parameters and the Regulation of Shell Shape in Marine Bivalves: A Case Study on Tellinoidea

Journal of Marine Biology , Volume 2014 (2014) – May 29, 2014

Loading next page...
 
/lp/hindawi-publishing-corporation/covarying-shell-growth-parameters-and-the-regulation-of-shell-shape-in-QFfHsx5Lo1

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Hindawi Publishing Corporation
Copyright
Copyright © 2014 Jean Béguinot.
ISSN
1687-9481
eISSN
1687-949X
Publisher site
See Article on Publisher Site

Abstract

Covarying Shell Growth Parameters and the Regulation of Shell Shape in Marine Bivalves: A Case Study on Tellinoidea div.banner_title_bkg div.trangle { border-color: #9E6C84 transparent transparent transparent; opacity:0.77; /*new styles start*/ -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=77)" ;filter: alpha(opacity=77); /*new styles end*/ } div.banner_title_bkg_if div.trangle { border-color: transparent transparent #9E6C84 transparent ; opacity:0.77; /*new styles start*/ -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=77)" ;filter: alpha(opacity=77); /*new styles end*/ } div.banner_title_bkg div.trangle { width: 249px; } #banner { background-image: url('http://images.hindawi.com/journals/jmb/jmb.banner.jpg'); background-position: 50% 0;} Hindawi Publishing Corporation Home Journals About Us Journal of Marine Biology About this Journal Submit a Manuscript Table of Contents Journal Menu About this Journal · Abstracting and Indexing · Aims and Scope · Article Processing Charges · Articles in Press · Author Guidelines · Bibliographic Information · Citations to this Journal · Contact Information · Editorial Board · Editorial Workflow · Free eTOC Alerts · Publication Ethics · Reviewers Acknowledgment · Submit a Manuscript · Subscription Information · Table of Contents Open Special Issues · Published Special Issues · Special Issue Guidelines Abstract Full-Text PDF Full-Text HTML Full-Text ePUB Linked References How to Cite this Article Journal of Marine Biology Volume 2014 (2014), Article ID 519510, 10 pages http://dx.doi.org/10.1155/2014/519510 Research Article Covarying Shell Growth Parameters and the Regulation of Shell Shape in Marine Bivalves: A Case Study on Tellinoidea Jean Béguinot 1,2 1 Société d’Histoire Naturelle, 12 rue des Pyrénées, 71200 Le Creusot, France 2 Biogéosciences, Université de Bourgogne, 21000 Dijon, France Received 12 February 2014; Revised 25 April 2014; Accepted 4 May 2014; Published 29 May 2014 Academic Editor: Ricardo Serrão Santos Copyright © 2014 Jean Béguinot. This is an open access article distributed under the Creative Commons Attribution License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Abstract Specific parameters characterising shell shape may arguably have a significant role in the adaptation of bivalve molluscs to their particular environments. Yet, such functionally relevant shape parameters (shell outline elongation, dissymmetry, and ventral convexity) are not those parameters that the animal may directly control. Rather than shell shape, the animal regulates shell growth. Accordingly, an alternative, growth-based description of shell-shape is best fitted to understand how the animal may control the achieved shell shape. The key point is, in practice, to bring out the link between those two alternative modes of shell-shape descriptions, that is, to derive the set of equations which connects the growth-based shell-shape parameters to the functionally relevant shell-shape parameters. Thus, a preliminary object of this note is to derive this set of equations as a tool for further investigations. A second object of this work is to provide an illustrative example of implementation of this tool. I report on an unexpected negative covariance between growth-based parameters and show how this covariance results in a severe limitation of the range of interspecific variability of the degree of ventral convexity of the shell outline within the superfamily Tellinoidea. Hypotheses are proposed regarding the constraints possibly at the origin of this limitation of interspecific variability. 1. Introduction Since Réaumur [ 1 ] at least, the shape of molluscs shells is relevantly understood, not simply as a geometrical figuration per se , defined at the outset, but also as the result of a cumulative growth process (of biomineral accretion). Accordingly, molluscan shells are one among those “archetypal” examples favoured by Thompson [ 2 ], where growth process definitely rules the resulting form which, indeed, would not make any sense being separated from its generating pathway. Defining more precisely the geometrical relationships relating the achieved shell shape to the involved shell-growth parameters is more recent however and was first developed in the framework of approximately conispirally coiled gastropod shells [ 3 – 7 ]. In bivalves, the shell-growth process has frequently been schematised using a set of vectors diverging from the valve umbo and rejoining the valve margin [ 8 – 10 ], the length of each vector thus representing the relative growth progress in the corresponding direction. This growth-based approach of shell-shape description is especially appropriate when addressing how the animal actually controls shell growth, so as to achieve a definite shell shape. Alternatively, when focus is put upon the functional role of shell shape, another kind of shape descriptors is preferentially required, typically including shell elongation, the degrees of dissymmetry, and of ventral convexity of shell outline [ 9 , 10 ]. Thus, while providing alternative descriptions of the same reality (the shell shape), these two distinct approaches, respectively, address different, complementary contexts, in terms of the animal concerns. In other words, while the animal survival success may partially depend upon the (presumably) functionally relevant set of shell-shape parameters [ 9 – 29 ], the animal control upon this category of shell-shape parameters is only indirect, readily operating only via the accretionary growth process of shell, which is best accounted for by the set of growth-based shape parameters (defined below). Accordingly, a rational understanding of how a functionally adequate shell outline is achieved through the animal’s direct control of the shell-growth process requires deriving, at first, the relationships between both sets of descriptive parameters of the shell outline. Hence, the derivation of the system of equations linking the functionally relevant set and the growth-based set of parameters describing shell outline is a preliminary object of this work. Then, in practice, these equations may serve as a tool to investigate how the growth-based parameters (and, as it happens, the existence of specific covariance between these parameters) can ultimately control the ranges of variation of each of the functionally relevant parameters. An illustrative example is proposed, within the marine bivalves superfamily Tellinoidea (Blainville 1814), demonstrating how a strong negative covariance between two specific growth-based parameters (“ α ” and “ ρ ,” defined below) results, in particular, in a substantial limitation of the range of interspecific variation of one of the functionally relevant shell-shape parameters, the degree of ventral convexity of the shell outline. This covariance and the resulting restriction of the range of interspecific variation of ventral convexity arguably answer ecological constraints applying to bivalve shell shape. Interestingly, it is worth noting that regulating processes purposely involving negative covariances between growth parameters are already known, in both gastropods [ 30 , 31 ] and bivalves [ 32 ], as a means to limit excessive intra specific variations of the adult-shell size (while, here, the regulation aims at limiting inter specific differences regarding shell shape ). 2. Relating the Functionally Relevant Shell Shape Parameters to the Growth-Based Shell Shape Parameters In a growth-based approach of shell shape, the sagittal outline of shells may be appropriately parameterised synthetically using three indices associated to three “typical growth vectors” (Figure 1 ), each of them extending from the valve umbo . The umbo (or “apex”) is defined, here, as “ the extreme dorsal side near the umbo itself ,” as quoted by Galtsoff [ 8 ]; see also [ 9 ]. being the valve length , then vectors and , respectively, join the apex to the shell outline at the extremities and of the segment and vector joins the apex to the shell outline at point via the middle of segment . Finally, the segment is perpendicular to xx ′, parallel through to . Figure 1: Definition of two alternative sets of descriptors of the shell outline: (a) the three growth-based parameters: apical angle α (= BÂC ); differential growth index ; dissymmetric growth index ; (b) the three functionally relevant parameters: elongation , dissymmetry , and ventral convexity . Three growth-based indices are defined as follows: (i) the apical angle “ α ” (angle BÂC ); (ii) the differential growth index “ ρ ” identified as the ratio between axial (dorsoventral) growth and mean lateral growth, ; (iii) the dissymmetric growth index “ δ ” identified as the ratio of the larger to the smaller lateral growth vectors, . These three parameters are geometrically independent factors, in the sense that no mutual dependence between α , ρ , and δ is compelled by purely geometric constraint: the direction and/or module of each vector may, indeed, freely be changed independently of the two others, in a purely geometric perspective. These three parameters thus account schematically for the growth pattern of valves. Alternatively, in a functionally relevant approach, the main traits of the shape of shell outline may be synthetically characterised by (i) the shell elongation, that is, the ratio of contour length to contour height, (ii) the valve dissymmetry, namely, the degree of dissymmetry of the position of the umbo versus the anterior and posterior extremities of shell, and (iii) the ventral convexity, that is, the degree of prominence of the ventral side of the shell outline, opposite to umbo. Three indices are defined correspondingly (Figure 1 ): the “shell elongation” index “ ” as the ratio , the “shell dissymmetry” index “ ” as the ratio , and the “ventral convexity” index “ ” as the ratio . Note that choosing, in both approaches, a limited number of parameters to describe the shell outline, rather than implementing more refined approaches, such as Fourier analysis of shell contour, is deliberate. As the shell outline in bivalves is generally relatively simple, the main traits of shell outline may be fairly well captured by even a limited number of appropriately chosen parameters [ 33 ]. Moreover, a major advantage of limiting the number of parameters is that the equations linking growth-based and functionally relevant shape parameters may be derived under an explicitly analytical form, as more appropriate to readily bring out and highlight the rationale behind the equations. As for the three growth-based parameters α , ρ , and δ above, these three functionally relevant parameters , , and , are, intrinsically, free from any geometrical constraint a priori and thus mutually independent. Yet, , , and are entirely dependent a posteriori upon the growth parameters α , ρ , and δ , according to the three geometrically based equations below (see Appendix for further details and a demonstration): The way each of the three parameters , , and depends upon each of the three governing parameters α , ρ , and δ may be quantified by considering the corresponding partial derivatives: , , , , , , , and . In short: (i) the shell elongation is (as expected) monotonously increasing with the apical angle α and monotonously decreasing with the differential-growth index ρ ; the dependence of upon the growth-dissymmetry index δ is less intuitive but is also monotonously positive; (ii) the shell dissymmetry is strongly increasing with the growth-dissymmetry index δ and, less intuitively, is decreasing with the apical angle α ; (iii) the ventral convexity of the shell outline is strongly increasing with both the apical angle α and the differential-growth index ρ and weakly decreasing with the growth-dissymmetry index δ . An overview of the variations (i) of the shell elongation and ventral convexity , according to α , ρ , at given δ , is provided in Figures 2(a) and 2(b) ; (ii) of the shell dissymmetry , according to α , δ , is provided in Figure 2(c) . Figure 2: The elongation , the ventral convexity , and the dissymmetry of shell outline computed against growth-based parameters (( 1 ), ( 2 ), and ( 3 )). Ventral convexity is increasing with both α and ρ , while the elongation increases with α but decreases with ρ . The dissymmetry increases with δ and decreases with α . 3. A Negative Covariance between Growth-Based Parameters α and ρ and the Consequences upon the Ranges of Interspecific Variations of the Shell Elongation and the Ventral Convexity , in Tellinoidea The modules of growth vectors , , and the apical angle α between and were measured for 85 species belonging to the two larger genera within the superfamily Tellinoidea, distributed worldwide: 36 species of Donax , 49 species of Tellina , using iconographic data by Robin [ 34 ]. Parameters α , ρ , δ and , , were then computed according to the definitions and equations above. One particular, unexpected feature emerging from this study is a negative covariance occurring between the differential growth index ρ and the apical angle α (Figure 3 ). The trend is statistically highly significant ( , , for Donax; , , for Tellina ; no explanation is suggested as to why the strength of covariance seems stronger for Tellina than for Donax ). No or weakly significant covariances occur between the index of growth dissymmetry δ and each of the two other growth parameters, α and ρ ( , ; , ; , ; , ). Figure 3: The differential growth index ρ plotted against the apical angle α : a strong negative covariance is recorded within each of the two studied bivalves genera, Donax and Tellina . (N.B.: similar patterns of negative covariation between α and ρ are observed, as well, within the other, smaller genus belonging to Tellinoidea: Arcopagia, Gari, Macoma ; Béguinot, unpublished results ). The occurrence of a strong covariance between growth factors (here between α and ρ ) was unexpected since, as mentioned above, these factors are mutually independent a priori , free from any prior geometrical constraint. This, in turn, suggests the involvement of another kind of constraint, of arguably biological origin as discussed later on. In turn, this strong negative covariance between the growth-based parameters α and ρ has direct consequences upon how the functionally relevant parameters, especially and , are actually dependent upon α and ρ . Theoretically, any given value of the shell elongation (or of the ventral convexity ) may be obtained by an infinity of different combinations of values of α and ρ (see ( 1 ) and ( 3 ) or Figures 2(a) and 2(b) ). In fact, the strong covariance between α and ρ strongly constrains the pattern of dependence of both and upon α and ρ , as highlighted by Figures 4(a) and 4(b) and Figures 5(a) and 5(b) . For example, the lowest values of shell elongation are systematically associated with both the highest values of ρ and the lowest values of α and the reverse stands for the highest values of . This is particularly striking for Tellina (Figure 4(b) ) due to the especially strong negative covariance within this genus (Figure 3 ). The rationale behind this pattern is easily understood from the fact that and in ( 1 ) (graphically presented in Figure 2(a) ). The pattern is different for the ventral convexity , in accordance with and being both > 0 in ( 3 ) (graphically presented in Figure 2(b) ). Figure 4: The shell elongation E plotted against the growth-based parameters α and ρ , for 36 species within the genus Donax (a) and 49 species within the genus Tellina (b)— black triangles : apical angle α (°/100); grey dots : differential growth index ρ . The increase of α and decrease of ρ with growing E are both highly significant for both genera ( in all cases). Figure 5: The ventral convexity K plotted against the growth-based parameters α and ρ , for 36 species within the genus Donax (a) and 49 species within the genus Tellina (b)— black triangles : apical angle α (°/100); grey dots : differential growth index ρ . The increase of α and decrease of ρ with growing K for Donax are highly significant ( ) and significant ( ), respectively. For Tellina , the trends are not significant ( for both). 4. Discussion 4.1. Linking the Main Traits of Shell Outline to the Growth-Based Parameters Reducing the morphological description of bivalve shell outline to a set of only three (mutually independent) parameters may seem excessive reductionism, a rather schematic approach. Yet, as is often the case (at least for simple shapes), even a few, but adequately selected, parameters may already capture much of the displayed data [ 33 ]. Moreover, focusing upon a few (major) parameters allows keeping a convenient analytical form to the equations linking the shell shape to the growth development and thus helps highlight the rationale behind these equations. In bivalves, the shell elongation , the shell dissymmetry , and the ventral convexity (defined in Figure 1 ) would likely be the main traits of the shell outline captured at first glance. Also, these parameters may arguably quantify some traits of shell contour potentially having significant functionalities, relevant to the animal survival success ( and/or : [ 9 – 28 ]; : [ 29 ]). Parallel to these three functionally relevant parameters , , and , three growth-based parameters α , ρ , and δ provide an alternative description of the shell outline, deliberately focused, this time, upon the developmental process which, finally, generate this particular shell outline. The functionally relevant parameters are related to the growth-based parameters by a set of geometrically based governing equations ( 1 ), ( 2 ), and ( 3 ). These equations rule the sign and degree of dependence of each functionally relevant parameter, , , , upon each growth-based parameter, α , ρ , and δ . Their analytical mode of expression opportunely allows an easy derivation of the trends of variations of , , according to α , ρ , and δ , as summarized in Table 1 . Table 1: The signs of the variations, / , / , / , / , / , / , / , and / of the functionally relevant parameters , , and , according to variations of the growth-based parameters , , and (according to Section 2 ). 4.2. The Regulation of the Ranges of Variation of Functionally Relevant Parameters via Appropriate Covariances between the Growth-Based Parameters If a given functionally relevant parameter has dependences of the same sign (either >0 or <0) upon two growth-based parameters, then a positive covariance between these two growth-based parameters will tend to increase the range of variation of the considered functionally relevant parameter (as compared to what would be this range of variation if there was no covariance between these two growth-based parameters). And, conversely, a negative covariance between these two growth-based parameters will tend to decrease the range of variation of the considered functionally relevant parameter. If a given functionally relevant parameter has dependences of opposite signs upon two growth-based parameters, then a positive covariance between these two growth-based parameters will tend to decrease the range of variation of the considered functionally relevant parameter. And, conversely, a negative covariance between these two growth-based parameters will tend to increase the range of variation of the considered functionally relevant parameter. Based on information provided in Table 1 for the signs of the dependence of , , upon α , ρ , and δ in bivalves, it is thus possible to predict how the range of variation of each of the three functionally relevant parameters, , , , is either enlarged or restricted according to the occurrence and sign of any particular covariance between the growth-based parameters α , ρ , and δ . 4.3. Covariance between Growth Parameters and the Resulting Pattern of Regulation of Shell Shape in the Superfamily Tellinoidea Moving now from theoretical preliminaries to practical applications, one important and unexpected feature emerges from a survey of the interspecific variations of growth-based parameters within Donax and Tellina , the two larger genera of bivalves belonging to the superfamily Tellinoidea: a strong negative covariance is recorded between the apical angle α and the differential growth ratio ρ (Figure 3 ). This covariance was rather unexpected since, as already mentioned, the growth-based parameters α , ρ , and δ are geometrically independent. In other words, this covariance draws attention upon some biologically relevant constraining process. From a functional point of view, the occurrence of this negative correlation between α and ρ results in conformity with Section 4.2 and Table 2 : (i) in a restriction of the range of variation of the ventral convexity (as compared to what would be this range of variation if there was no covariance between α and ρ ), since the opposite variations of α and ρ tend to mutually cancel their respective effects upon , due to both and having the same sign (>0) in ( 3 ); (ii) conversely, in an extension of the range of variations of the elongation , due to and having opposite signs in ( 1 ). Table 2: The relative variations ( / )/( / ), ( / )/( / ), ( / )/( / ), ( / )/( / ), ( / )/( / ), ( / )/( / ), ( / )/( / ), ( / )/( / ), and ( / )/( / ) of the functionally relevant parameters , , , according to variations of the growth-based parameters , , . Thus, the negative correlation which actually constrains the variations of α and ρ allows a large range of interspecific variations of the shell elongation with, yet, limited collateral influence upon the ventral convexity . Specifically, for the same variation of valve elongation (say from 1.2 to 2.2), the resulting computed variation of is 2.23 times smaller due to the negative covariance recorded between α and ρ than it would be if the elongation would proceed, for example, from the variation of α alone. 4.4. Discussing the Possible Origins of the Negative Covariance between the Growth-Based Parameters α and ρ The constraining covariance between growth-based parameters α and ρ reported within the superfamily Tellinoidea may have either (i) a developmental origin, as directly operating on the orientations and respective sizes of the “growth vectors” and thus on α and ρ , or (ii) an adaptive origin, as the result of a selective process, more readily involving one or several of the functionally relevant parameters , , . Distinguishing between these two hypotheses, however, is far from being easy [ 35 ]. Yet, a comparison of the present results with the data obtained for the intraspecific variations recorded within Donax trunculus (Linné, 1758) and Donax vittatus (da Costa, 1778) may possibly help to cast some light on the question. At the intraspecific level, a positive covariance between ρ and δ is recorded in both Donax trunculus and Donax vittatus (Béguinot, unpublished data ), instead of the negative covariance between α and ρ observed at the interspecific level within Tellinoidea. This positive covariance between ρ and δ results, accordingly (Section 4.2 and Table 1 ), in a restriction of the ranges of intraspecific variation of both the elongation and the ventral convexity of shell outline. These contrasted patterns between the intraspecific and the interspecific levels, regarding both the type of covariance and the associated consequences, should likely make more sense in an “adaptive” perspective than according to a “developmental” point of view. The logic is not easy to understand, indeed, behind a hypothetic developmental constraint applied directly to growth-based parameters and which moves—seemingly somewhat arbitrarily—from a positive covariance between ρ and δ at the intraspecific level to a negative covariance between α and ρ at the interspecific level. The associated consequences, in terms of the extension of the range of variation of the presumably functionally related parameters and , would be more readily understandable. A regulation makes sense, which tends to reduce the ranges of variations of functionally relevant phenotypic characters at the intraspecific level and, on the contrary, contributes to enlarge these ranges of variations at the interspecific level. And this is the case, here, for the shell elongation —although the range of variation of the ventral convexity remains restricted at both intra- and interspecific levels. Now, what might be the selective advantage of restraining the variability of ventral convexity , inclusively at the interspecific level? Some tentative arguments may be suggested. The ventral portion of valves is often the weakest and, thus, more at risks [ 13 ], since the ventral part of the shell, especially the posteroventral sector, is ordinarily less thick and thus less resistant than the dorsal part. Increasing ventral convexity, that is, ventral prominence, would thus enlarge the corresponding weakened zone. Also, a larger convexity would tend to reduce the sealing pressure along the ventral margin (at given unchanged positions of insertion of the adductor muscles) and thus would make easier the shell opening by predators. Accordingly, a sufficient level of shell mechanical resistance to various kinds of environmentally induced stresses might preclude too high values of ventral convexity. Conversely, a sufficient value of ventral convexity might well be dictated by the avoidance of excessively acute profiles of valves contour at the anterior and posterior extremities (i.e., around and , Figure 1 ) which would inevitably result from too weak a convexity. Such acute portions would be at still greater risks and more prone to suffer local breakage. An optimally centred and size-limited range of values for the ventral convexity of shell outline would thus arguably be selected. Admittedly, the “adaptive” perspective remains to be more firmly confirmed. Extending investigations, combining both the functionally relevant and the growth-based approaches of shell shape and applied to quite a wider range of bivalves groups would probably help to clarify the point. Appendix The Equations Relating the Valve Shape Parameters , , to the Growth Parameters α , ρ , and δ Consider the following: with ; and defined above. N.B.: for the specific case where shells are (sub-) symmetric ( ), the three equations are simplified as In other words, this system of three equations ( A.1 ), ( A.2 ), and ( A.3 ) expresses the tensor relationship linking the two alternative sets of parameters describing the shell outline, α , ρ , δ and . Demonstration of ( A.1 ), ( A.2 ), and ( A.3 ) . The following, classical relationships between angles, sides, and height in triangles are applied here within the triangle (see Figure 1 ): Valve Elongation . Consider Accounting for the definitions of and , it comes that Equation ( A.5 ) yields then From ( A.9 ) and ( A.10 ) Now, and, from ( A.6 ) and ( A.7 ), it follows that and, as , Substituting by its expression in ( A.10 ) yields and then Finally, ( A.11 ) and ( A.14 ) yield for the elongation Valve Dissymmetry . and, according to ( A.5 ) and ( A.6 ), . With ( ) defined at ( A.10 ), it comes that Convexity of the Ventral Contour of Valve. The convexity of the ventral contour of valve is defined by the ratio . From ( A.7 ) and accounting for , it comes that According to ( A.9 ), and . Substitution of and by their expressions above yields finally with ; according to ( A.14 ) and defined by ( A.15 ). Conflict of Interests The author declares that there is no conflict of interests regarding the publication of this paper. Acknowledgment The suggestions from two anonymous reviewers substantially improved the paper. References R. A. Réaumur, “Eclaircissemens de quelques difficultés sur la formation et l'accroissement des coquilles,” in Histoire de l'Académie Royale des Sciences Avec les Mémoires de Mathematique et Physique , pp. 384–394, 1716. D. W. Thompson, On Growth and Form , Cambridge University Press, London, UK, 1942. D. M. Raup, “The geometry of coiling in gastropods,” Proceedings of the National Academy of Sciences of the United States of America , vol. 47, pp. 602–609, 1961. D. M. Raup, “Geometric analysis of shell coiling: general problems,” Journal of Paleontology , vol. 40, no. 5, pp. 1178–1190, 1966. D. E. Schindel, “Unoccupied morphospace and the coiled geometry of gastropods: architectural constraint or geometric covariation,” in Causes of Evolution , R. A. Ross and W. D. Allmon, Eds., pp. 270–304, University of Chicago Press, Chicago, Ill, USA, 1990. B. Tursch, “Spiral growth: the “Museum of all shells” revisited,” Journal of Molluscan Studies , vol. 63, pp. 547–554, 1997. S. H. Rice, “The bio-geometry of mollusc shells,” Paleobiology , vol. 24, no. 1, pp. 133–149, 1998. View at Scopus P. S. Galtsoff, “The American Oyster, Crassostrea virginica Gmelin—morphology and structure of shell,” Fishery Bulletin , vol. 64, pp. 16–47, 1966. A. Sokołowski, K. Pawlikowski, M. Wołowicz, P. Garcia, and J. Namieśnik, “Shell deformations in the Baltic clam Macoma balthica from southern Baltic Sea (the Gulf of Gdansk): hypotheses on environmental effects,” Ambio , vol. 37, no. 2, pp. 93–100, 2008. View at Publisher · View at Google Scholar · View at Scopus N. Caill-Milly, N. Bru, K. Mahé, C. Borie, and F. D’Amico, “Shell shape analysis and spatial allometry patterns of Manila Clam ( Ruditapes philippinarum ) in a mesotidial coastal lagoon,” Journal of Marine Biology , vol. 2012, Article ID 281206, 11 pages, 2012. View at Publisher · View at Google Scholar N. A. Holme, “Notes on the mode of life of the Tellinidae (Lamellibranchia),” Journal of the Marine Biological Association of the United Kingdom , vol. 41, pp. 699–703, 1961. S. M. Stanley, Relation of Shell Form To Life Habits of the Bivalvia (Mollusca) , The Geological Society of America, Boulder, Colo, USA, 1970. G. J. Vermeij, A Natural History of Shells , Princeton University Press, Princeton, NJ, USA, 1993. O. Ellers, “Form and motion of Donax variabilis in flow,” Biological Bulletin , vol. 189, no. 2, pp. 138–147, 1995. View at Scopus A. G. Soares, R. K. Callahan, and A. M. C. De Ruyck, “Microevolution and phenotypic plasticity in Donax serra roding (Bivalvia: Donacidae) on high energy sandy beaches,” Journal of Molluscan Studies , vol. 64, no. 4, pp. 407–421, 1998. View at Scopus L. C. Anderson and P. D. Roopnarine, “Role of constraint and selection in the morphologic evolution of Caryocorbula (Mollusca: Corbulidae) from the Caribbean Neogene,” Palaeontologia Electronica , vol. 8, no. 2, 2005. View at Scopus A. S. Freeman and J. E. Byers, “Divergent induced responses to an invasive predator in marine mussel populations,” Science , vol. 313, no. 5788, pp. 831–833, 2006. View at Publisher · View at Google Scholar · View at Scopus J. Hollander, D. C. Adams, and K. Johannesson, “Evolution of adaptation through allometric shifts in a marine snail,” Evolution , vol. 60, no. 12, pp. 2490–2497, 2006. View at Publisher · View at Google Scholar · View at Scopus J. Hollander, M. L. Collyer, D. C. Adams, and K. Johannesson, “Phenotypic plasticity in two marine snails: constraints superseding life history,” Journal of Evolutionary Biology , vol. 19, no. 6, pp. 1861–1872, 2006. View at Publisher · View at Google Scholar · View at Scopus T. Lakowitz, C. Brönmark, and P. Nyström, “Tuning in to multiple predators: conflicting demands for shell morphology in a freshwater snail,” Freshwater Biology , vol. 53, no. 11, pp. 2184–2191, 2008. View at Publisher · View at Google Scholar · View at Scopus T. C. Edgell and R. Rochette, “Differential snail predation by an exotic crab and the geography of shell-claw covariance in the northwest Atlantic,” Evolution , vol. 62, no. 5, pp. 1216–1228, 2008. View at Publisher · View at Google Scholar · View at Scopus C. D. G. Harley, M. W. Denny, K. J. MacH, and L. P. Miller, “Thermal stress and morphological adaptations in limpets,” Functional Ecology , vol. 23, no. 2, pp. 292–301, 2009. View at Publisher · View at Google Scholar · View at Scopus S. M. Peyer, J. C. Hermanson, and C. E. Lee, “Developmental plasticity of shell morphology of quagga mussels from shallow and deep-water habitats of the Great Lakes,” The Journal of Experimental Biology , vol. 213, no. 15, pp. 2602–2609, 2010. View at Publisher · View at Google Scholar · View at Scopus R. L. Minton, E. M. Lewis, B. Netherland, and D. M. Hayes, “Large differences over small distances: plasticity in the shells of Elimia potosiensis (Gastropoda: Pleuroceridae),” International Journal of Biology , vol. 3, no. 1, pp. 23–32, 2011. S. M. Peyer, J. C. Hermanson, and C. E. Lee, “Effects of shell morphology on mechanics of zebra and quagga mussel locomotion,” The Journal of Experimental Biology , vol. 214, no. 13, pp. 2226–2236, 2011. View at Publisher · View at Google Scholar · View at Scopus J. M. Serb, A. Alejandrino, E. Otárola-Castillo, and D. C. Adams, “Morphological convergence of shell shape in distantly related scallop species (Mollusca: Pectinidae),” Zoological Journal of the Linnean Society , vol. 163, no. 2, pp. 571–584, 2011. View at Publisher · View at Google Scholar · View at Scopus P. Morais, M. M. Rufino, J. Reis, E. Dias, and R. Sousa, “Assessing the morphological variability of Unio delphinus Spengler 1738 (Bivalvia : Uninonidae) using geometric morphometry,” Journal of Molluscan Studies , vol. 80, no. 1, pp. 17–23, 2014. T. D. Levine, H. B. Hansen, and G. W. Gerald, “Effects of shell shape, size, and sculpture in burrowing and anchoring abilities in the freshwater mussel Potamilus alatus (Unionidae),” Biological Journal of the Linnean Society , vol. 111, no. 1, pp. 136–144, 2014. R. D. K. Thomas, “Functional morphology, ecology and evolutionary conservatism in the Glycymerididae (Bivalvia),” Palaeontology , vol. 18, no. 2, pp. 217–254, 1975. S. J. Gould, “A developmental constraint in Cerion, with comments on the definition and interpretation of constraint in evolution,” Evolution , vol. 43, no. 3, pp. 516–539, 1989. View at Scopus J. Béguinot, “Régulation du développement dimensionnel de la coquille chez trois espèces de Gastéropodes,” Bulletin Société Linnéenne de Lyon , vol. 83, no. 5-6, pp. 119–126, 2014. S. C. Ackerly, “Morphogenetic regulation in the shells of bivalves and brachiopods: evidence from the geometry of the spiral,” Lethaia , vol. 25, no. 3, pp. 249–256, 1992. View at Scopus M. J. Rogers, “A description of the generating curve of bivalves with straight hinges,” Palaeontology , vol. 25, no. 1, pp. 109–117, 1982. A. Robin, Encyclopedia of Marine Bivalves , ConchBooks, Hackenheim, Germany, 2011. J. Maynard-Smith, R. Burian, S. Kauffman, et al., “Developmental constraints and evolution: a perspective from the Mountain Lake Conference on development and evolution,” Quarterly Review of Biology , vol. 60, no. 3, pp. 265–287, 1975. var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-8578054-2']); _gaq.push(['_trackPageview']); (function () { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })();

Journal

Journal of Marine BiologyHindawi Publishing Corporation

Published: May 29, 2014

There are no references for this article.