Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Study and evaluation of the mechanical properties on sawdust reinforced epoxy composite

Study and evaluation of the mechanical properties on sawdust reinforced epoxy composite The growing environmental awareness all through the world has motivated a standard change toward planning and designing better materials having good performance, which are very much suited to the environmental factors. The purpose of this study is to investigate the impact on mechanical, thermal and water absorption properties of sawdust-based composites reinforced by epoxy, and the amount of sawdust in each form.Design/methodology/approachManufacturing of the sawdust reinforced epoxy composites is the main area of the research for promoting the green composite by having good mechanical properties, biodegradability or many applications. Throughout this research work, the authors emphasize the importance of explaining the methodology for the evaluation of the mechanical and water absorption properties of the sawdust reinforced epoxy composites used by researchers.FindingsIn this paper, a comprehensive review of the mechanical properties of sawdust reinforced epoxy composite is presented. This study is reported about the use of different Wt.% of sawdust composites prepared by different processes and their mechanical, thermal and water absorption properties. It is studied that after optimum filler percentage, mechanical, thermal properties gradually decrease, but water absorption property increases with Wt.% of sawdust. The changes in the microstructure are studied by using scanning electron microscopy.Originality/valueThe novelty of this study lies in its use of a systematic approach that offers a perspective on choosing suitable processing parameters for the fabrication of composite materials for persons from both industry and academia. A study of sawdust reinforced epoxy composites guides new researchers in the fabrication and characterization of the materials. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png World Journal of Engineering Emerald Publishing

Study and evaluation of the mechanical properties on sawdust reinforced epoxy composite

Download PDF
14 pages

Loading next page...
 
/lp/emerald-publishing/study-and-evaluation-of-the-mechanical-properties-on-sawdust-2KYo16O8Oz
Publisher
Emerald Publishing
Copyright
© Emerald Publishing Limited
ISSN
1708-5284
DOI
10.1108/wje-04-2021-0211
Publisher site
See Article on Publisher Site

Abstract

The growing environmental awareness all through the world has motivated a standard change toward planning and designing better materials having good performance, which are very much suited to the environmental factors. The purpose of this study is to investigate the impact on mechanical, thermal and water absorption properties of sawdust-based composites reinforced by epoxy, and the amount of sawdust in each form.Design/methodology/approachManufacturing of the sawdust reinforced epoxy composites is the main area of the research for promoting the green composite by having good mechanical properties, biodegradability or many applications. Throughout this research work, the authors emphasize the importance of explaining the methodology for the evaluation of the mechanical and water absorption properties of the sawdust reinforced epoxy composites used by researchers.FindingsIn this paper, a comprehensive review of the mechanical properties of sawdust reinforced epoxy composite is presented. This study is reported about the use of different Wt.% of sawdust composites prepared by different processes and their mechanical, thermal and water absorption properties. It is studied that after optimum filler percentage, mechanical, thermal properties gradually decrease, but water absorption property increases with Wt.% of sawdust. The changes in the microstructure are studied by using scanning electron microscopy.Originality/valueThe novelty of this study lies in its use of a systematic approach that offers a perspective on choosing suitable processing parameters for the fabrication of composite materials for persons from both industry and academia. A study of sawdust reinforced epoxy composites guides new researchers in the fabrication and characterization of the materials.

Journal

World Journal of Engineering – Emerald Publishing

Published: Jan 11, 2023

Keywords: Epoxy; Glass fiber; Mechanical property; Sawdust

References

  • Water absorption, flexural properties and morphological characterization of chicken feather fiber-wood sawdust hybrid reinforced waste paper-cement bio-composites
    Adediran, A.A.; Oladele, I.O.; Omotosho, T.F.; Adesina, O.S.; Olayanju, T.M.A.; Fasemoyin, I.M.
  • Tensile behaviour of glass fiber reinforced plastics subjected to different environmental conditions
    Agarwal, A.; Garg, S.; Rakesh, P.K.
  • Utilization of waste saw dust from wood industry in development of glass fiber epoxy resin hybrid green composite material
    Agarwal, M.; Dixit, A.; Dwivedi, S.P.; Mishra, R.K.
  • An experimental investigation of the impact response of composite laminates
    Aktas, M.; Atas, C.; Icten, B.M.
  • Compression-after impact behaviour of laminated composite plates subjected to low velocity impact in high temperatures
    Aktas, M.; Karakuzu, R.; Arman, Y.
  • Hydrophobic treatment of natural fibers and their composites
    Ali, A.; Shaker, K.; Nawab, Y.
  • Mechanical properties of a polyester fiber glass composite
    Aramide, F.O.; Atanda, P.O.; Olorunniwo, O.
  • Impact response of woven composites with small weaving angles
    Atas, C.; Liu, D.
  • Effect of various forms of glass fiber reinforcements on tensile properties of polyester matrix composite
    Awan, G.H.; Ali, L.; Ghauri, K.M.
  • Development of an RVE and its stiffness predictions based on mathematical homogenization theory for short fibre composites
    Babu, K.P.; Mohite, P.M.; Upadhyay, C.S.
  • The role of copper compounds as fillers in the transfer and wear behaviour of polyetheretherketone
    Bahadur, D.L.; Gong, S.
  • Modeling and simulation of composite materials
    Behera, R.K.; Pinisetty, D.; Luong, D.D.
  • Low velocity impact tests of laminate glass-fiber-epoxy matrix composite material plates
    Belingardi, G.; Vadori, R.
  • Analysis on mechanical properties of wood plastic composite
    Bhaskar, K.; Jayabalakrishnan, D.; Kumar, M.V.; Sendilvelan, S.; Prabhahar, M.
  • Determination of elastic constants of glass/epoxy unidirectional laminates by the vibration testing of plates
    Bledzki, A.K.; Kessler, A.; Rikards, R.
  • Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites
    Boopalan, M.; Niranjanaa, M.; Umapathy, M.J.
  • Thermal performance and characterization of a sawdust-clay composite material
    Charai, M.; Sghiouri, H.; Mezrhab, A.; Karkri, M.; Elhammouti, K.; Nasri, H.
  • Effect of particle size and weight percent of different wood dust on the tensile strength of glass fiber epoxy/saw dust composite using RSM
    Chauhan, S.S.; Maurya, N.K.; Dwivedi, S.P.
  • Environmental degradation of glass fibre reinforced polymer composite
    Chhibber, R.; Sharma, A.; Mukherjee, A.
  • The natural structure of woven 2D fabrics to reinforce textile composites
    Choogin, V.; Chepelyuk, E.; Bandara, P.; Hui, D.
  • Damping and vibration analysis of polyethylene fiber composite under varied temperature
    Colakoglu, M.
  • Micromechanical modeling and computation of elasto-plastic materials reinforced with distributed-orientation fibers
    Doghri, L.T.
  • Multi-inclusion unit cell models for metal matrix composites with randomly oriented discontinuous reinforcements
    Eckschlager, A.; Böhm, H.J.; Han, W.
  • Environmental effects on the mechanical properties of glass fiber epoxy composite tubular specimens
    Ellyin, F.; Maser, R.
  • Enhancement of the mechanical properties of glass/polyester composites via matrix modification glass/polyester composite siloxane matrix modification
    Erden, S.; Sever, K.; Seki, Y.
  • Effect of types of wood on the thermal conductivities of wood saw dust particle reinforced composites
    Faruk Hossain, M.; Shuvo, S.N.; Islam, M.A.
  • A fully automated numerical tool for a comprehensive validation of homogenization models and its application to spherical particles reinforced composites
    Ghossein, E.; Lévesque, T.N.
  • Tensile strength of teak wood saw dust – cashew nut shell liquid resin composites
    Ganesan, M.; Valarmathi, T.N.
  • Effect of filler addition on the compressive and impact properties of glass fibre reinforced epoxy
    Gupta, N.; Brar, B.S.; Woldesenbet, E.
  • Morphology, dynamic mechanical and thermal studies on poly (styrene-co-acrylonitrile) modified epoxy resin/glass fibre composites
    Hameed, N.; Sreekumar, P.A.; Francis, B.
  • Textile composite forming simulations at meso and macro scale
    Hamila, N.; Khan, N.A.; Gatouillat, S.; de Luycker, E.; Vidal-Salle, E.; Mabrouki, T.
  • Mechanical properties of continuous natural fibre-reinforced polymer composites
    Herrera-Franco, P.; Valadez-González, A.
  • Flexural mechanical characteristic of sawdust and chipwood filled epoxy composites
    Hisham, S.; Faieza, A.A.; Ismail, N.; Sapuan, S.; Ibrahim, M.
  • Mechanical, thermal and durable performance of wastes sawdust as coarse aggregate replacement in conventional concrete
    Huseien, G.F.; Memon, R.P.; Kubba, Z.; Sam, A.R.M.; Asaad, M.A.; Mirza, J.; Memon, U.
  • Fatigue behaviour of woven glass fiber reinforced polyester under variable temperature
    Hussain Al-Alkawi, J.; Dhafir Al-Fattal, S.; Abdul-Jabar Ali, H.
  • Optically transparent continuous glass fibre-reinforced epoxy matrix composite: fabrication, optical and mechanical properties
    Iba, H.; Chang, T.; Kagawa, Y.
  • Low temperature effect on impact response of quasi-isotropic glass/epoxy laminated plates
    Icten, B.M.; Atas, C.; Aktas, M.
  • Treated tropical wood sawdust-polypropylene polymer composite: mechanical and morphological study
    Idrus, M.A.M.M.; Hamdan, S.; Rahman, M.R.; Islam, M.S.
  • Modification of epoxy resins with polyaryl ether ketones
    Iijima, T.; Tochimoto, T.; Tomoi, M.
  • Impact characterization of glass/epoxy composite plates: an experimental and numerical study
    Karakuzu, R.; Erbil, E.; Aktas, M.
  • Mechanical properties of wood–fiber reinforced polypropylene composites: effect of a novel compatibilizer with isocyanate functional group
    Karmarkar, A.; Chauhan, S.S.; Jayant, M.M.; Chanda, M.
  • Strength properties of bamboo and steel reinforced concrete containing manufactured sand and mineral admixtures
    Karthik, S.; Rao, P.R.M.; Awoyera, P.O.
  • On the rule of mixtures for predicting the mechanical properties of composites with homogeneously distributed soft and hard particles
    Kim, H.S.; Hong, S.I.; Kim, S.J.
  • On the SEM features of glass–epoxy composite system subjected to dry sliding wear
    Kishore, S.K.P.; Seetharamu, S.
  • SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers
    Kishore, S.P.; Seetharamu, S.
  • Flexural properties of sawdust-reinforced epoxy composites post-cured in microwaves
    Ku, H.; Donald, M.; Cardona, F.; Trada, M.
  • Study of mechanical properties of wood dust reinforced epoxy composite
    Kumar, R.
  • Study of mechanical properties of wood dust reinforced epoxy composite
    Kumar, R.; Kumar, K.; Sahoo, P.; Bhowmik, S.
  • Effects of coconut sawdust on mechanical properties and porosity of concrete mixtures
    Kumendong, E.; Supit, S.; Mantiri, H.
  • Role of matrix modification on interlaminar shear strength of glass fibre/epoxy composites
    Liu, Y.; Yang, J.P.; Xiao, H.M.
  • Thermo analysis of fibreglass polyester composite and reutilisation of the glass fibre residue to obtain a glass ceramic material
    Lopez, F.A.; Martin, M.A.; Alguacil, F.J.
  • Modified rule of mixtures and Halpin–Tsai model for prediction of tensile strength of micron-sized reinforced composites and Young’s modulus of multiscale reinforced composites for direct extrusion fabrication
    Luo, Z.; Li, X.; Shang, J.; Zhu, H.; Fang, D.
  • Mechanical properties of epoxy resin matrix composites reinforced with jute fiber, coconut coir and human hair
    Manik, M.K.; Radheshyam, h. G.; Anooj, J.
  • Assessment of the mechanical properties of aluminium metal matrix composite: a review
    Maurya, M.; Kumar, S.; Bajpai, V.
  • Process parameters, development and applications of stir cast composite: a review
    Maurya, M.; Kumar, S.; Bajpai, V.; Maurya, N.K.
  • Composites prepared via friction stir processing technique: a review
    Maurya, M.; Kumar, S.; Maurya, N.K.
  • Compressive and shear properties of unidirectional glass/epoxy composites subjected to mechanical loading and low temperature services
    Mohammad Torabizadeh, A.T.
  • Investigation on sliding wear behavior and mechanical properties of jatropha oil cake-filled glass-epoxy composites
    Mohan, N.; Natarajan, S.; Kumaresh Babu, S.P.
  • Fatigue study of e-glass fiber reinforced polyester composite under fully reversed loading and spectrum loading
    Muhannad, Z.K.; Al-Shukri, H.M.
  • Innovations in value-addition of agricultural by-products in Uganda
    Nsubuga, D.; Banadda, N.; Kiggundu, N.
  • A study on fiber orientation influence on the mechanical response of a short fiber composite structure
    Ogierman, W.; Kokot, G.
  • Compositional, mass-volume-area related and mechanical properties of sponge gourd (luffa aegyptiaca) seeds
    Ogunsina, B.S.; Adegbenjo, A.O.; Opeyemi, O.O.
  • Tensile dynamic behaviour of a quasi-unidirectional E-glass/polyester composite
    Pardo, S.; Baptiste, D.; Decobert, D.
  • Investigations on three-body abrasive wear and mechanical properties of particulate filled glass-epoxy composites
    Patnaik, A.; Satapathy, A.; Biswas, S.
  • Investigation of the wear behavior of a glass-fibre-reinforced composite and plain polyester resin
    Pihtili, H.; Tosun, N.
  • Flat-pressed wood plastic composites from sawdust and recycled polyethylene terephthalate (PET): physical and mechanical properties
    Rahman, K.S.; Islam, M.N.; Rahman, M.M.
  • Flat-pressed wood plastic composites from sawdust and recycled polyethylene terephthalate (PET): physical and mechanical properties
    Rahman, K.S.; Islam, M.N.; Rahman, M.M.
  • Influence of fiber treatment on the mechanical and morphological properties of sawdust reinforced polypropylene composites
    Rezaur, R.,M.; Nazrul Islam, M.; Monimul Huque, M.
  • Sorption of phenol from synthetic aqueous solution by activated saw dust: optimizing parameters with response surface methodology
    Sahu, O.; Rao, D.G.; Gabbiye, N.; Engidayehu, A.; Teshale, F.
  • Construction materials reinforced with natural products
    Sanal, I.; Verma, D.; Martínez, L.; Kharissova, O.; Kharisov, B.
  • Mechanical properties of woven banana fibre reinforced epoxy composites
    Sapuan, S.; Leenie, A.; Harimi, M.; Beng, Y.
  • Bio-composites: eco-friendly substitute of glass fiber composites
    Shaker, K.; Nawab, Y.; Jabbar, M.; Kharissova, O.; Martínez, L.; Kharisov, B.
  • Experimental investigations of A359/Si3N4 surface composite produced by multi-pass friction stir processing
    Srivastava, A.K.; Maurya, N.K.; Dixit, A.R.; Dwivedi, S.P.; Saxena, A.; Maurya, M.
  • Mechanical properties of sawdust and woodchips
    Stasiak, M.; Molenda, M.; Bańda, M.; Gondek, E.
  • Three-body abrasive wear behaviour of particulate-filled glass–vinyl ester composites
    Suresha, B.; Chandramohan, G.
  • The role of fillers on friction and slide wear characteristics in glassepoxy composite systems
    Suresha, B.; Chandramohan, G.; Prakash, J.N.
  • Friction and slide characteristics of glass-epoxy and glassepoxy filled with SiCp composites
    Suresha, B.; Chandramohan, G.; Sadananda Rao, P.R.
  • Improved mechanical properties of an epoxy glass–fiber composite reinforced with surface organomodified nanoclays
    Withers, G.J.; Yu, Y.; Khabashesku, V.N.; Cercone, L.; Hadjiev, V.G.; Souza, J.M.; Davis, D.C.
  • Wood fiber reinforced polyethylene and polypropylene composites with high modulus and impact strength
    Yuan, Q.; Wu, D.; Gotama, J.; Bateman, S.
  • Production of composite bricks from sawdust using Portland cement as a binder
    Zziwa, A.; Kizito, S.; Banana, A.; Kaboggoza, J.; Kambugu, R.; Sseremba, O.
  • Three-body abrasive wear of short glass fibre polyester composite
    Chand, N.; Naik, A.; Neogi, S.
  • Computational simulation of composites reinforced by planar random fibres: homogenization and localization by unit cell and mean field approaches
    Duschlbauer, D.; Böhm, H.J.; Pettermann, H.E.
  • Tensile property of hand lay-up plain-weave woven e glass/polyester composite: curing pressure and ply arrangement effect
    Faizal, M.A.; Beng, Y.K.; Dalimin, M.N.
  • Influence of fiber orientation on global mechanical behavior and mesoscale strain localization in a short glass-fiber-reinforced epoxy polymer composite during tensile deformation investigated using digital image correlation
    Godara, A.; Raabe, D.
  • The interlaminar strength of the glass fiber polyester composite
    Putic, S.; Bajceta, B.; Vitkovic, D.
  • Comparison between microwave and thermal curing of glass fiber–epoxy composites: effect of microwave-heating cycle on mechanical properties
    Tanrattanakul, V.; Jaroendee, D.