Access the full text.
Sign up today, get DeepDyve free for 14 days.
Constantinos Soutis, F. Smith, F. Matthews (2000)
Predicting the compressive engineering performance of carbon fibre-reinforced plasticsComposites Part A-applied Science and Manufacturing, 31
F. Ascione, L. Feo, F. Maceri (2009)
An experimental investigation on the bearing failure load of glass fibre/epoxy laminatesComposites Part B-engineering, 40
N. Wannapa, V. Uthaisangsuk (2020)
Experimental and numerical failure analyses of dissimilar material joints between aluminium and thermoplasticComposite Structures, 252
A. Wagih, R. Tao, A. Yudhanto, G. Lubineau (2020)
Improving mode II fracture toughness of secondary bonded joints using laser patterning of adherendsComposites Part A: Applied Science and Manufacturing
F. Sen, M. Pakdil, O. Sayman, Semih Benli (2008)
Experimental failure analysis of mechanically fastened joints with clearance in composite laminates under preloadMaterials & Design, 29
Buket Okutan, R. Karakuzu (2003)
The strength of pinned joints in laminated compositesComposites Science and Technology, 63
M. McCarthy, C. McCarthy, V. Lawlor, W. Stanley (2005)
Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part I—model development and validationComposite Structures, 71
U. Kemiklioğlu, B. Baba (2019)
Mechanical response of adhesively bonded composite joints subjected to vibration load and axial impactComposites Part B: Engineering
A. Wagih, P. Maimí, E. González, N. Blanco, J. Aja, F. Escalera, R. Olsson, E. Alvarez (2016)
Damage sequence in thin-ply composite laminates under out-of-plane loadingComposites Part A-applied Science and Manufacturing, 87
E. Pineda, A. Waas, B. Bednarcyk, Craig Collier, P. Yarrington (2009)
Progressive damage and failure modeling in notched laminated fiber reinforced compositesInternational Journal of Fracture, 158
C. Lopes, S. Sádaba, C. González, J. Llorca, P. Camanho (2016)
Physically-sound simulation of low-velocity impact on fiber reinforced laminatesInternational Journal of Impact Engineering, 92
Y. Mi, M. Crisfield, G. Davies, H. Hellweg (1998)
Progressive Delamination Using Interface ElementsJournal of Composite Materials, 32
Tomas Ireman, Tron Ranvik, I. Eriksson (2000)
On damage development in mechanically fastened composite laminatesComposite Structures, 49
Dian‐sen Li, Ying Yang, Lei Jiang (2021)
Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compressionComposite Structures
A. Wagih, G. Lubineau
Enhanced mode II fracture toughness of secondary bonded joints using tailored sacrificial cracks inside the adhesiveComposites Science and Technology
H. Zhu, Dian‐sen Li, W. Han, Lei Jiang (2020)
Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angleMaterials & Design, 195
G. Kelly, S. Hallström (2004)
Bearing strength of carbon fibre/epoxy laminates: effects of bolt-hole clearanceComposites Part B-engineering, 35
B. Egan, M. McCarthy, R. Frizzell, C. McCarthy (2015)
Finite element analysis of catastrophic failure of dynamically-loaded countersunk composite fuselage jointsComposite Structures, 133
H. Zhu, Z. Guo, M. Zhu, J. Cui, Q. He, Y. Li (2020)
A Progressive FE Failure Model for Laminates under Biaxial LoadingMechanics of Composite Materials, 56
G. Alfano, M. Crisfield (2001)
Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issuesInternational Journal for Numerical Methods in Engineering, 50
Zhangxin Guo, Hao Zhu, Yongcun Li, Xiaoping Han, Zhihua Wang (2016)
Simulating Initial and Progressive Failure of Open-Hole Composite Laminates under TensionApplied Composite Materials, 23
Zhen Zhang, Yi Xiao, Yuanhong Xie, Z. Su (2019)
Effects of contact between rough surfaces on the dynamic responses of bolted composite joints: Multiscale modeling and numerical simulationComposite Structures
M. Moura, A. Marques (2002)
Prediction of low velocity impact damage in carbon–epoxy laminatesComposites Part A-applied Science and Manufacturing, 33
Y. Miyano, M. Nakada, N. Sekine (2010)
Life Prediction of CFRP/Metal Bolted Joint Under Water Absorption ConditionJournal of Composite Materials, 44
Hsien-Tang Sun, F. Chang, X. Qing (2002)
The Response of Composite Joints with Bolt-Clamping Loads, Part I: Model DevelopmentJournal of Composite Materials, 36
Yi He, Yi Xiao, Yanqing Liu, Zhen Zhang (2018)
An efficient finite element method for computing modal damping of laminated composites: Theory and experimentComposite Structures, 184
Zhangxin Guo, Zhonggui Li, H. Zhu, J. Cui, Dian‐sen Li, Yongcun Li, Yunbo Luan (2020)
Numerical simulation of bolted joint composite laminates under low-velocity impactMaterials today communications, 23
Panding Wang, R. He, Haosen Chen, Xiaolei Zhu, Zhao Qilin, D. Fang (2015)
A novel predictive model for mechanical behavior of single-lap GFRP composite bolted joint under static and dynamic loadingComposites Part B-engineering, 79
F. Ascione, L. Feo, F. Maceri (2010)
On the pin-bearing failure load of GFRP bolted laminates: An experimental analysis on the influence of bolt diameterComposites Part B-engineering, 41
Dian‐sen Li, M. Dang, Lei Jiang (2021)
Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven compositesComposite Structures
P. Camanho, S. Bowron, F. Matthews (1998)
Failure Mechanisms in Bolted CFRPJournal of Reinforced Plastics and Composites, 17
B. Egan, C. McCarthy, M. McCarthy, P. Gray, R. Frizzell (2012)
Modelling a single-bolt countersunk composite joint using implicit and explicit finite element analysisComputational Materials Science, 64
Ofir Shor, R. Vaziri (2015)
Adaptive insertion of cohesive elements for simulation of delamination in laminated composite materialsEngineering Fracture Mechanics, 146
The influence of the number and arrangement of bolts on the tensile properties of bolted composite laminates was studied in the present study.Design/methodology/approachBased on the finite element model, the stiffness degradation method is used to simulate the damage evolution process for the failure of bolted composite laminates. Using ABAQUS finite element software combined with material failure criteria, the numerical calculation of the connection strength and failure mode of bolted composite laminates was carried out.FindingsThe results of the study show that the tensile strength of the composite laminates connected by three bolts is higher than that of the laminates connected by two bolts. And the arrangement of different bolts has a great influence on the failure strength of bolted laminates.Originality/valueBolted connection of composite laminates is a common problem in engineering practice. The effect of bolt arrangement and number on the strength of composite laminates is studied in this manuscript.
Multidiscipline Modeling in Materials and Structures – Emerald Publishing
Published: Jan 2, 2023
Keywords: Composite laminates; Bolted joint; Tensile load; Mechanical properties; Finite element analysis
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.