Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/de-gruyter/the-effect-of-the-heat-flux-on-the-self-ignition-of-oriented-strand-99sMxEaEAL
References (21)
-
ISO Plastics Thermogravimetry of polymers Part General principles
, 14
-
C. Huggett (1980)
Estimation of rate of heat release by means of oxygen consumption measurementsFire and Materials, 4
-
B. Sundström, P. Hees, P. Thureson (1998)
Results and analysis from fire tests of building products in ISO 9705, the room/corner test -
BABRAUSKAS (1992)
Heat Release in Fires Publisher LTDScience, 16
-
J. Troitzsch (1990)
International Plastics Flammability Handbook: Principles - Regulations - Testing and Approval -
V. Babrauskas (1982)
Development of the cone calorimeter—A bench-scale heat release rate apparatus based on oxygen consumption†Fire and Materials, 8
-
HUGGETT (1980)
Estimation of the Rate of Heat Release by Means of Oxygen Consmption of Fire andJournal, 11
-
ISO Fire Tests Full Scale Room Test for Surface Products
-
V. Babrauskas (1990)
Heat Release In Fires -
(2012)
Alterations of selected characteristics of oak and poplar wood after thermal loading by radiation sources -
D. Drysdale (2011)
An Introduction to Fire Dynamics -
V. Babrauskas, R. Peacock (1990)
Heat release rate: The single most important variable in fire hazard☆Fire Safety Journal, 18
-
KOŠÍK (1986)
materiály a ich požiarna ochrana Polymeric materials and their fire protectionBratislava
-
Di NENNO (1995)
The SFPE Handbook of Fire Protection Fire Dynamics National Fire Protection ISBNEngineering Association
-
(1992)
From Bunsen Burner to Heat Release Rate Calorimeter -
BABRAUSKAS (1982)
of the Cone Calorimeter - scale Rate of Heat Release Apparatus Based on Oxygen ConsumptionDevelopment, 12
-
Kronospan (2013)
Superfinish ECO - OSB for interior use as a load - bearing building element in a damp environment according to EN carrier plate for use in humid environments Statement of features number, 13
-
TROITZSCH (1990)
Plastics Handbook Principles Approval Wien Verlag ISBN, 7
-
ISO Plastics - Differential scanning calorimetry Part General principles
, 15
-
G. Bennett (1990)
The SFPE handbook of fire protection engineering : By P.J. DiNenno, C.L. Beyler, R.L.P. Custer, W.D. Walton and J.M. Watts, Jr., National Fire Protection Association, Quincy, MA and Society of Fire ProtJournal of Hazardous Materials, 23
-
(1986)
Polymérne materiály a ich požiarna ochrana. (Polymeric materials and their fire protection.) Bratislava: ALFA
- Publisher
- de Gruyter
- Copyright
- © 2017 Siegfried Hirle et al., published by De Gruyter Open
- ISSN
- 1338-0532
- eISSN
- 1338-0532
- DOI
- 10.1515/rput-2017-0014
- Publisher site
- See Article on Publisher Site
Abstract
AbstractThis article deals with the initiation phase of flaming and smouldering burning of oriented strand board. The influence of heat flux on thermal degradation of OSB boards, time to ignition, heat release rate and mass loss rate using thermal analysis and vertical electrical radiation panel methods were studied. Significant information on the influence of the heat flux density and the thickness of the material on time to ignition was obtained.
Journal
Research Papers Faculty of Materials Science and Technology Slovak University of Technology – de Gruyter
Published: Jun 1, 2017