Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

The Analysis of Structure and Physicochemical Properties of Yarns Used for Manufacturing Hernia Meshes

The Analysis of Structure and Physicochemical Properties of Yarns Used for Manufacturing Hernia... AbstractThe article presents a comparative analysis of the yarns used for manufacturing hernia meshes. For the analysis, two different linear masses, 46 dtex and 72 dtex, of transparent and dyed yarns were used; the dye used in the yarns was adequate for their intended use. The DSC tests showed the influence of thermal treatment on the change of thermal properties of the yarns. At the same time, it was proved that the aforementioned treatment had a bearing on the changes of crystallinity degree. All types of yarns were also subjected to physicochemical tests required for all the materials used for the production of hernia meshes. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Autex Research Journal de Gruyter

The Analysis of Structure and Physicochemical Properties of Yarns Used for Manufacturing Hernia Meshes

Loading next page...
 
/lp/de-gruyter/the-analysis-of-structure-and-physicochemical-properties-of-yarns-used-vsLXA07gTs
Publisher
de Gruyter
Copyright
© 2019 Z. Draczynski et al., published by Sciendo
ISSN
2300-0929
eISSN
2300-0929
DOI
10.1515/aut-2018-0016
Publisher site
See Article on Publisher Site

Abstract

AbstractThe article presents a comparative analysis of the yarns used for manufacturing hernia meshes. For the analysis, two different linear masses, 46 dtex and 72 dtex, of transparent and dyed yarns were used; the dye used in the yarns was adequate for their intended use. The DSC tests showed the influence of thermal treatment on the change of thermal properties of the yarns. At the same time, it was proved that the aforementioned treatment had a bearing on the changes of crystallinity degree. All types of yarns were also subjected to physicochemical tests required for all the materials used for the production of hernia meshes.

Journal

Autex Research Journalde Gruyter

Published: Jun 1, 2019

There are no references for this article.