Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/de-gruyter/preparation-of-silicone-modified-acrylate-latex-and-its-application-l8NsXekpJe
References (16)
-
Yao Meng, Bingtao Tang, Jinghai Xiu, Xixi Zheng, Wei Ma, Benzhi Ju, Shufen Zhang (2015)
Simple fabrication of colloidal crystal structural color films with good mechanical stability and high hydrophobicityDyes and Pigments, 123
-
Xue Jiang, Huilu Hu, Yu Bai, Xiuzhi Tian, Dan Huang, Shugen Wang (2013)
Synthesis and properties of the vinyl silicone oil modified polyacrylate core-shell latex as a binder for pigment printingJournal of Adhesion Science and Technology, 27
-
M. Yen, H. Tsai, Po-Da Hong (2007)
Effect of soft segment composition on the physical properties of nonionic aqueous polyurethane containing side chain PEGMEJournal of Applied Polymer Science, 105
-
Min Li, Aiqin Gao, L. Wu, Danna Fu, K. Xie (2017)
Crosslinking formulations based on novel reactive disperse dyes for printing cotton fabricsTextile Research Journal, 87
-
C. Chern, Shi‐Yow Lin, Li-Jen Chen, Shuo Wu (1997)
Emulsion polymerization of styrene stabilized by mixed anionic and nonionic surfactantsPolymer, 38
-
(1994)
26-30. the shell: synthesis, characterization, and application -
M. Yen, H. Tsai, Po-Da Hong (2006)
The physical properties of aqueous cationic–nonionic polyurethane with poly(ethylene glycol methyl ether) side chain and its blend with aqueous cationic polyurethaneJournal of Applied Polymer Science, 100
-
Xi Li, Yi Liu, Jiawen Li, Wenhao Huang (2010)
Influence of the Optical Multi-Film Thickness on the Saturation of the Structural Color DisplayedAdvances in Natural Science, 3
-
(2014)
Preparation of Silicone-Modified Acrylic Ester Emulsion Adhesive with Core-Shell Structure -
C. Warburton (1975)
Crockfastness of Polyacrylate Textile Pigment-Printing Binders: Effect of Binder Mechanical Properties and Adhesion to FabricJournal of Adhesion, 7
-
Matthew Cathell, C. Schauer (2007)
Structurally colored thin films of Ca2+-cross-linked alginate.Biomacromolecules, 8 1
-
Xue Jiang, Jian Gu, Xiuzhi Tian, Dan Huang, Yiqi Yang (2011)
Synthesis of the Hydroxyl-Containing Poly(dimethyl siloxane) Modified Polyacrylate Core-Shell Latex and the Application as a Novel Binder for Pigment Printing of FabricJournal of Dispersion Science and Technology, 32
-
Shunsheng Cao, Bailing Liu, Xiaobo Deng, Songjun Li (2005)
Core/shell particles containing 3-(methacryloxypropyl)-trimethoxysilane in the shell: synthesis, characterization, and application.Macromolecular bioscience, 5 7
-
Lois Hamilton, Annacleta Chiweshe (1998)
Textile pigment printing binders prepared by modifying wheat gluten with methyl acrylateStarch-starke, 50
-
Mansoor Iqbal, J. Mughal, M. Sohail, A. Moiz, Kamran Ahmed, K. Ahmed (2012)
Comparison between Pigment Printing Systems with Acrylate and Butadiene Based BindersJournal of Analytical Sciences, Methods and Instrumentation, 2
-
W. Schwindt, G. Faulhaber, A. Moore (1971)
Resin‐bonded Pigment Printing and Dyeing, 2
- Publisher
- de Gruyter
- Copyright
- © 2019 Li Ai et al., published by Sciendo
- ISSN
- 2300-0929
- eISSN
- 2300-0929
- DOI
- 10.1515/aut-2018-0061
- Publisher site
- See Article on Publisher Site
Abstract
AbstractAttempts were made to find a more environmentally friendly technique for the printing of polyester (PET ) fabric, acting as an alternative to a usual disperse dye direct-printing process by using a plenty of water and salt and producing effluent contaminants. The low-emission printing technique includes the recipe containing disperse dye paste, synthetic thickener and the water-based silicone-modified acrylate and high-temperature curing process. The water-based silicone-modified acrylate for adhesive coating of polyester (PET) fibres was synthesized using butyl acrylate (BA), eight four methyl siloxane (D4), acrylonitrile (AN), styrene (St), methyl acrylic acid (MAA) and N-methylol acrylamide (NMA).The results showed that the silicone-modified acrylate adhesive could increase the percentages of dye fixation and the colour strength. The superior colour fastness (≥level 4) with the low-emission printing process was realized. The wastewater stream produced by the technique had a residual dye concentration of 2.62 mg/L, which was reduced by approximately 19 times that produced by traditional direct printing. The effluent wastewater drainage was reduced by 76.9%.
Journal
Autex Research Journal – de Gruyter
Published: Sep 1, 2019