Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Interaction between Edge-Crack and Aggregate in Silicate-Based Composite

Interaction between Edge-Crack and Aggregate in Silicate-Based Composite AbstractThe paper deals with investigation of the interaction between an edge-crack and an aggregate in a silicate-based composite, because adding of aggregates into basic matrix material can improve the fracture mechanical properties of the material significantly. In this work, the three-point-bending test is modelled by means of the finite element method and the dependences of fracture parameters on various material and geometrical parameters of the aggregate and the interfacial transition zone are studied. The results are discussed thoroughly. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series. de Gruyter

Interaction between Edge-Crack and Aggregate in Silicate-Based Composite

Loading next page...
 
/lp/de-gruyter/interaction-between-edge-crack-and-aggregate-in-silicate-based-Jcw80MzOvH
Publisher
de Gruyter
Copyright
© 2017 Lucie Malíková et al., published by De Gruyter Open
ISSN
1804-4824
eISSN
1804-4824
DOI
10.1515/tvsb-2017-0028
Publisher site
See Article on Publisher Site

Abstract

AbstractThe paper deals with investigation of the interaction between an edge-crack and an aggregate in a silicate-based composite, because adding of aggregates into basic matrix material can improve the fracture mechanical properties of the material significantly. In this work, the three-point-bending test is modelled by means of the finite element method and the dependences of fracture parameters on various material and geometrical parameters of the aggregate and the interfacial transition zone are studied. The results are discussed thoroughly.

Journal

Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series.de Gruyter

Published: Dec 1, 2017

References