Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Description of fabric thickness and roughness on the basis of fabric structure parameters

Description of fabric thickness and roughness on the basis of fabric structure parameters Abstract This paper focuses on the evaluation of thread interlacing and its influence on some of the end-use properties of woven fabric, especially its influence fabric thickness and roughness. Weaves and their interlacing structural models, different thread positions in the fabric, and thread compression in thread interlacing are important not only for final design but for final fabric properties. From the weave viewpoint, it is necessary to distinguish the specific interlacing in the longitudinal and in the transverse section as well as the dimension and design of the binding repeat. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Autex Research Journal de Gruyter

Description of fabric thickness and roughness on the basis of fabric structure parameters

Autex Research Journal , Volume 12 (2) – Oct 1, 2012

Loading next page...
 
/lp/de-gruyter/description-of-fabric-thickness-and-roughness-on-the-basis-of-fabric-30yQ4K0aoM
Publisher
de Gruyter
Copyright
Copyright © 2012 by the
ISSN
1470-9589
DOI
10.2478/v10304-012-0008-6
Publisher site
See Article on Publisher Site

Abstract

Abstract This paper focuses on the evaluation of thread interlacing and its influence on some of the end-use properties of woven fabric, especially its influence fabric thickness and roughness. Weaves and their interlacing structural models, different thread positions in the fabric, and thread compression in thread interlacing are important not only for final design but for final fabric properties. From the weave viewpoint, it is necessary to distinguish the specific interlacing in the longitudinal and in the transverse section as well as the dimension and design of the binding repeat.

Journal

Autex Research Journalde Gruyter

Published: Oct 1, 2012

There are no references for this article.