Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Behavior of metallic trace elements containing in stabilized and solidified oily petroleum sludge

Behavior of metallic trace elements containing in stabilized and solidified oily petroleum sludge AbstractThe present work examines the influence of the leaching conditions on the release of various chemical elements from a cementitious material obtained by solidification of an industrial waste rejection of Algeria. Toxicity Characteristic Leaching Procedure (TCLP), X-ray diffraction (XRD) and Scanning electron microscopy coupled with energy dispersive X-ray microanalysis SEM-EDX analyses were employed to characterize the waste and the stabilized/solidified materials. Than several formulations were prepared with different percent of waste ranging from 0 % to 30 %. To evaluate the influence of leaching conditions on the release of chemical ions (Zn2+, Pb2+, Cl-, Mg2+, Ca2+, Na+, K+ and SO42−) contained in the stabilized and solidified materials, the Acid Neutralization Capacity (ANC), the Pore Water (PW) and Monolith Leaching Tests (MLT) have been carried out. The leaching tests (ANC, PW and MLT) have shown a low metal leachability. However, the lowest released amount was observed for the MLT. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Nova Biotechnologica et Chimica de Gruyter

Behavior of metallic trace elements containing in stabilized and solidified oily petroleum sludge

Loading next page...
 
/lp/de-gruyter/behavior-of-metallic-trace-elements-containing-in-stabilized-and-y8mjq2bvrh
Publisher
de Gruyter
Copyright
© 2019 Dihia Bellache et al., published by Sciendo
ISSN
1338-6905
eISSN
1339-004X
DOI
10.2478/nbec-2019-0018
Publisher site
See Article on Publisher Site

Abstract

AbstractThe present work examines the influence of the leaching conditions on the release of various chemical elements from a cementitious material obtained by solidification of an industrial waste rejection of Algeria. Toxicity Characteristic Leaching Procedure (TCLP), X-ray diffraction (XRD) and Scanning electron microscopy coupled with energy dispersive X-ray microanalysis SEM-EDX analyses were employed to characterize the waste and the stabilized/solidified materials. Than several formulations were prepared with different percent of waste ranging from 0 % to 30 %. To evaluate the influence of leaching conditions on the release of chemical ions (Zn2+, Pb2+, Cl-, Mg2+, Ca2+, Na+, K+ and SO42−) contained in the stabilized and solidified materials, the Acid Neutralization Capacity (ANC), the Pore Water (PW) and Monolith Leaching Tests (MLT) have been carried out. The leaching tests (ANC, PW and MLT) have shown a low metal leachability. However, the lowest released amount was observed for the MLT.

Journal

Nova Biotechnologica et Chimicade Gruyter

Published: Dec 1, 2019

References