Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Analytical solution to bending of stiffened and continuous antisymmetric laminates

Analytical solution to bending of stiffened and continuous antisymmetric laminates Abstract Analytical Strip Method is presented for the analysis of the bending-extension coupling problem of stiffened and continuous antisymmetric thin laminates. A system of three equations of equilibrium, governing the general response of antisymmetric laminates, is reduced to a single eighth-order partial differential equation (PDE) in terms of a displacement function. The PDE is then solved in a single series form to determine the displacement response of antisymmetric cross-ply and angle-ply laminates. The solution is applicable to rectangular laminates with two opposite edges simply supported and the other edges being free, clamped, simply supported, isotropic beam supports, or point supports. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Curved and Layered Structures de Gruyter

Analytical solution to bending of stiffened and continuous antisymmetric laminates

Loading next page...
 
/lp/de-gruyter/analytical-solution-to-bending-of-stiffened-and-continuous-hM2094N0sq
Publisher
de Gruyter
Copyright
Copyright © 2015 by the
ISSN
2353-7396
eISSN
2353-7396
DOI
10.1515/cls-2015-0013
Publisher site
See Article on Publisher Site

Abstract

Abstract Analytical Strip Method is presented for the analysis of the bending-extension coupling problem of stiffened and continuous antisymmetric thin laminates. A system of three equations of equilibrium, governing the general response of antisymmetric laminates, is reduced to a single eighth-order partial differential equation (PDE) in terms of a displacement function. The PDE is then solved in a single series form to determine the displacement response of antisymmetric cross-ply and angle-ply laminates. The solution is applicable to rectangular laminates with two opposite edges simply supported and the other edges being free, clamped, simply supported, isotropic beam supports, or point supports.

Journal

Curved and Layered Structuresde Gruyter

Published: Jan 1, 2015

References