Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Alternative design for extremely large telescopes and options to use the VATT for ELT design demonstration

Alternative design for extremely large telescopes and options to use the VATT for ELT design... Abstract A variety of optical designs for extremely large telescopes (ELTs) can be found throughout the technical literature. Most feature very fast primary mirrors of either conic or spherical figure. For those designs with conic primary mirrors, many of the optical approaches tend to be derivatives of either the aplanatic Cassegrain or Gregorian systems. The Cassegrain approach is more common as it results in a shorter optical system, but it requires a large convex aspheric secondary mirror, which is extremely difficult and expensive to test. The Gregorian approach is physically longer and suffers from greater field curvature. In some design variations, additional mirrors are added to reimage and possibly flatten a Cassegrain focus. An interesting alternative ELT design uses a small Cassegrain system to image the collimated output of a Gregorian-Mersenne concentrator. Another alternative approach, currently in favor for use on the European ELT, uses three powered mirrors and two flat mirrors to reimage a Cassegrain focus out the side similar to a Nasmyth system. A preliminary examination suggests that a small, fast primary mirror, such as that used on the VATT, might be used for a subscale prototype of current ELT optical design options. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Optical Technologies de Gruyter

Alternative design for extremely large telescopes and options to use the VATT for ELT design demonstration

Loading next page...
 
/lp/de-gruyter/alternative-design-for-extremely-large-telescopes-and-options-to-use-oh5jHRXH5Z

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
de Gruyter
Copyright
Copyright © 2013 by the
ISSN
2192-8576
eISSN
2192-8584
DOI
10.1515/aot-2013-0043
Publisher site
See Article on Publisher Site

Abstract

Abstract A variety of optical designs for extremely large telescopes (ELTs) can be found throughout the technical literature. Most feature very fast primary mirrors of either conic or spherical figure. For those designs with conic primary mirrors, many of the optical approaches tend to be derivatives of either the aplanatic Cassegrain or Gregorian systems. The Cassegrain approach is more common as it results in a shorter optical system, but it requires a large convex aspheric secondary mirror, which is extremely difficult and expensive to test. The Gregorian approach is physically longer and suffers from greater field curvature. In some design variations, additional mirrors are added to reimage and possibly flatten a Cassegrain focus. An interesting alternative ELT design uses a small Cassegrain system to image the collimated output of a Gregorian-Mersenne concentrator. Another alternative approach, currently in favor for use on the European ELT, uses three powered mirrors and two flat mirrors to reimage a Cassegrain focus out the side similar to a Nasmyth system. A preliminary examination suggests that a small, fast primary mirror, such as that used on the VATT, might be used for a subscale prototype of current ELT optical design options.

Journal

Advanced Optical Technologiesde Gruyter

Published: Dec 1, 2013

References