Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Acoustic Emission of Corroded Weldments During Tensile Test

Acoustic Emission of Corroded Weldments During Tensile Test AbstractThe article deals with the use of acoustic emission to identify the formation of cracks during the mechanical loading in the corrosive attacked weldment S235JR+N. The experiment includes the methodology for continual record of emissive signals, data analysis and monitoring of material response to monitor mechanical stress effect in real time. There is possibility to observe response of corrosive degraded samples in real time during mechanical stress through the suitably designed methodology of detection, process and analysing of acoustic emission signals. It is possible to gain new information about processes rising inside the material by this way of data measurement. The signals of acoustic emission can be used as the way of identification for the micro cracks rising in the inner and also external structure of effortful materials. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Management Systems in Production Engineering de Gruyter

Loading next page...
 
/lp/de-gruyter/acoustic-emission-of-corroded-weldments-during-tensile-test-gaQ0FVILIG

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
de Gruyter
Copyright
© 2019 Michal Sustr et al., published by Sciendo
eISSN
2450-5781
DOI
10.1515/mspe-2019-0033
Publisher site
See Article on Publisher Site

Abstract

AbstractThe article deals with the use of acoustic emission to identify the formation of cracks during the mechanical loading in the corrosive attacked weldment S235JR+N. The experiment includes the methodology for continual record of emissive signals, data analysis and monitoring of material response to monitor mechanical stress effect in real time. There is possibility to observe response of corrosive degraded samples in real time during mechanical stress through the suitably designed methodology of detection, process and analysing of acoustic emission signals. It is possible to gain new information about processes rising inside the material by this way of data measurement. The signals of acoustic emission can be used as the way of identification for the micro cracks rising in the inner and also external structure of effortful materials.

Journal

Management Systems in Production Engineeringde Gruyter

Published: Dec 1, 2019

There are no references for this article.