Curved and Layered Structures Volume 9 Issue 1

Journal Article

On the deformation of laminated composite and sandwich curved beams

Avhad, Pravin V.; Sayyad, Atteshamuddin S.

2022 Curved and Layered Structures

doi:10.1515/cls-2022-0001

AbstractPlenty of research articles are available on the static deformation analysis of laminated straight beams using refined shear deformation theories. However, research on the deformation of laminated curved beams with simply supported boundary conditions is limited and needs more attention...

Open Access

Journal Article

A study on the construction technology of the Seljuk minarets in Isfahan with focus on their geometric brick pattern

Safaeianpour, Ali; Valibeig, Nima

2022 Curved and Layered Structures

doi:10.1515/cls-2022-0002

AbstractUsing decorative elements is an inseparable aspect of Iranian architecture. Architectural ornaments in many buildings, including the minarets, represent the architect’s craftsmanship. As such, the minarets in Isfahan have different types of brickwork ornamentations, such as 90-degree...

Open Access

Journal Article

A numerical evaluation on nonlinear dynamic response of sandwich plates with partially rectangular skin/core debonding

Tuswan, Tuswan; Zubaydi, Achmad; Piscesa, Bambang; Ismail, Abdi; Ariesta, Rizky Chandra;

2022 Curved and Layered Structures

doi:10.1515/cls-2022-0003

AbstractAs one of the most dangerous defects in the sandwich panel, debonding could significantly degrade load carrying capacity and affect dynamic behaviour. The present work dealt with debonding detection of the rectangular clamped hybrid sandwich plate by using ABAQUS software. The influence...

Open Access

Journal Article

Application of physical theory of cavity in the construction of double skin facades

Bielek, Boris; Szabó, Daniel; Klem, Josip; Kaniková, Kristína

2022 Curved and Layered Structures

doi:10.1515/cls-2022-0004

AbstractThe article deals with the issue of double skin transparent facades as a new technological-operational system of transparent exterior walls. Especially of high-rise buildings, which with its operating modes ingeniously uses a renewable source of solar energy to reduce the energy needs of...

Open Access

Journal Article

Application of generalized equations of finite difference method to computation of bent isotropic stretched and/or compressed plates of variable stiffness under elastic foundation

Youssoufa, Seydou; Sali, Moussa; Njifenjou, Abdou; Joseph, Nkongho Anyi; Valery, Ngayihi Abbe Claude

2022 Curved and Layered Structures

doi:10.1515/cls-2022-0005

AbstractThe computation of bent isotropic plates, stretched and/or compressed, is a topic widely explored in the literature from both experimental and numerical point of view. We expose in this work an application of the generalized equations of Finite difference method to that topic. The...

LitStream

Journal Article

Effect of concrete and reinforcement continuity on repairing mid-span zone in simply supported one-way slab

Kadhim, Muhammad Jawad; Shadhan, Khalid K.; Al-Zahra, Bilal Ismaeel Abd

2022 Curved and Layered Structures

doi:10.1515/cls-2022-0006

AbstractThe flexural strength of slabs may be reduced due to accidents and environmental effects. This study focuses on the rehabilitation of the one-way reinforced concrete slab. Experimental works include five simply supported one-way reinforced concrete slabs with width, depth, and length of...

LitStream

Journal Article

Numerical evaluation of expansion loops for pipe subjected to thermal displacements

Yudo, Hartono; Jokosisworo, Sarjito; Amiruddin, Wilma; Pujianto, Pujianto; Tuswan, Tuswan;

2022 Curved and Layered Structures

doi:10.1515/cls-2022-0007

AbstractThe thermal expansion can lead to the high stress on the pipe. The problem can be overcome using expansion loops in a certain length depending on the material’s elastic modulus, diameter, the amount of expansion, and the pipe’s allowable stresses. Currently, there is no exact definition...

Open Access

Journal Article

Mixed convection around a circular cylinder in a buoyancy-assisting flow

Majdi, Hasan Shakir; Mashkour, Mahmoud A.; Habeeb, Laith Jaafer; Ilic, Marko

2022 Curved and Layered Structures

doi:10.1515/cls-2022-0008

AbstractIn this paper, the effect of mixed convection on the flow behavior and heat transfer around a circular cylinder disclosed to a vertically upward laminar air stream is numerically examine. The buoyancy-aided flow is utilized to eliminate and control the vortex shedding of the cylinder. The...

Open Access

Journal Article

Temperature-dependent mechanical properties of Al/Cu nanocomposites under tensile loading via molecular dynamics method

Abdulrehman, Mohammed Ali; Hussein, Mohammed Ali Mahmood; Marhoon, Ismail Ibrahim

2022 Curved and Layered Structures

doi:10.1515/cls-2022-0009

AbstractAl-Cu Nanocomposites (NCs) are widely used in industrial applications for their high ductility, light weight, excellent thermal conductivity, and low-cost production. The mechanical properties and deformation mechanisms of Metal Matrix NCs (MMNCs) strongly depend on the matrix...

Open Access

Journal Article

Multi thermal waves in a thermo diffusive piezo electric functionally graded rod via refined multi-dual phase-lag model

Jeyaraman, Poongkothai; Mahesh, Samydurai; Selvamani, Rajendran; Dimitri, Rossana; Tornabene, Francesco

2022 Curved and Layered Structures

doi:10.1515/cls-2022-0010

AbstractIn the present work, a novel analytical model is provided for wave dispersion in a piezo-thermoelastic diffusive functionally graded rod through the multi-phase lag model and thermal activation. The plain strain model for thermo piezoelectric functionally graded rod is considered. The...

Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Curved and Layered Structures Volume 9 Issue 1

Related Journals:

Advanced Search

Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Curved and Layered Structures Volume 9 Issue 1

Related Journals:

Our policy towards the use of cookies